bumped version in README

Credits: https://github.com/LarsWH
Excerpt from PR:
```
Hi,

I added support for 'RC5 extended' in order to make this project:
https://www.instructables.com/id/Remote-Control-for-Lava-mMotion-Swing-Mounting-Bra/

The modification is working nicely in this single application. It has
not been tested elsewhere.

(I am new to Git and this is my first pull request ever. So please
excuse me if I have messed something up)

Kind regards,
Lars
```

Merged #522

Contributors.md

@@ -3,7 +3,6 @@ These are the active contributors of this project that you may contact if there
 
 - [z3t0](https://github.com/z3t0) : Active Contributor and currently also the main contributor.
   * Email: zetoslab@gmail.com
-  * Skype: polarised16
 - [shirriff](https://github.com/shirriff) : An amazing person who worked to create this awesome library and provide unending support
 - [AnalysIR](https:/github.com/AnalysIR): Active contributor and is amazing with providing support!
 - [Informatic](https://github.com/Informatic) : Active contributor

IRremote.h

@@ -270,6 +270,7 @@ class IRsend
 		//......................................................................
 #		if SEND_RC5
 			void  sendRC5        (unsigned long data,  int nbits) ;
+			void  sendRC5ext     (unsigned long addr, unsigned long cmd, boolean toggle);
 #		endif
 #		if SEND_RC6
 			void  sendRC6        (unsigned long data,  int nbits) ;

README.md

@@ -8,7 +8,7 @@ This library enables you to send and receive using infra-red signals on an Ardui
 
 Tutorials and more information will be made available on [the official homepage](http://z3t0.github.io/Arduino-IRremote/).
 
-## Version - 2.2.3
+## Version - 2.4.3
 
 ## Installation
 1. Navigate to the [Releases](https://github.com/z3t0/Arduino-IRremote/releases) page.
@@ -43,7 +43,7 @@ We are open to suggestions for adding support to new boards, however we highly r
 | [ATtiny84](https://github.com/SpenceKonde/ATTinyCore)                    | **6**               | **1**             |
 | [ATtiny85](https://github.com/SpenceKonde/ATTinyCore)                    | **1**               | **TINY0**         |
 | [ATmega8](https://github.com/MCUdude/MiniCore)                           | **9**               | **1**             |
-| Atmega32u4                                                               | 5, 9, **13**        | 1, 3, **4**       |
+| Atmega32u4                                                               | 5, **9**, 13        | 1, 3, **4**       |
 | [ATmega48, ATmega88, ATmega168, ATmega328](https://github.com/MCUdude/MiniCore) | **3**, 9     | 1, **2**          |
 | [ATmega1284](https://github.com/MCUdude/MightyCore)                      | 13, 14, 6           | 1, **2**, 3       |
 | [ATmega164, ATmega324, ATmega644](https://github.com/MCUdude/MightyCore) | 13, **14**          | 1, **2**          |
@@ -57,6 +57,12 @@ We are open to suggestions for adding support to new boards, however we highly r
 | [Teensy 3.0 / 3.1](https://www.pjrc.com/teensy/)                         | **5**               | **CMT**           |
 | [Teensy-LC](https://www.pjrc.com/teensy/)                                | **16**              | **TPM1**          |
 
+
+### Experimental patches
+The following are strictly community supported patches that have yet to make it into mainstream. If you have issues feel free to ask here. If it works well then let us know!
+
+[Arduino 101](https://github.com/z3t0/Arduino-IRremote/pull/481#issuecomment-311243146)
+
 The table above lists the currently supported timers and corresponding send pins, many of these can have additional pins opened up and we are open to requests if a need arises for other pins.
 
 ## Usage

boarddefs.h

@@ -85,8 +85,8 @@
 // Teensy 2.0
 #elif defined(__AVR_ATmega32U4__)
 	//#define IR_USE_TIMER1   // tx = pin 14
-	//#define IR_USE_TIMER3   // tx = pin 9
-	#define IR_USE_TIMER4_HS  // tx = pin 10
+	#define IR_USE_TIMER3   // tx = pin 9
+	//#define IR_USE_TIMER4_HS  // tx = pin 10
 
 // Teensy 3.0 / Teensy 3.1
 #elif defined(__MK20DX128__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)

changelog.md

@@ -1,3 +1,6 @@
+## 2.4.3
+- Added Philips Extended RC-5 protocol support [PR #522] (https://github.com/z3t0/Arduino-IRremote/pull/522)
+
 ## 2.3.3 - 2017/03/31
 - Added ESP32 IR receive support [PR #427](https://github.com/z3t0/Arduino-IRremote/pull/425)
 

ir_RC5_RC6.cpp

@@ -78,6 +78,73 @@ void  IRsend::sendRC5 (unsigned long data,  int nbits)
 
 	space(0);  // Always end with the LED off
 }
+
+void  IRsend::sendRC5ext (unsigned long addr, unsigned long cmd, boolean toggle)
+{
+	// Set IR carrier frequency
+	enableIROut(36);
+	
+	unsigned long addressBits = 5;
+	unsigned long commandBits = 7;
+	unsigned long nbits = addressBits + commandBits;
+	
+	// Start
+	mark(RC5_T1);
+	
+	// Bit #6 of the command part, but inverted!
+	unsigned long cmdBit6 = (1UL << (commandBits-1)) & cmd;
+	if (cmdBit6) {
+		// Inverted (1 -> 0 = mark-to-space)
+		mark(RC5_T1);
+		space(RC5_T1);
+	} else {
+		space(RC5_T1);
+		mark(RC5_T1);
+	}
+	commandBits--;
+
+	// Toggle bit
+	static int toggleBit = 1;
+	if (toggle) {
+		if (toggleBit == 0) {
+			toggleBit = 1;
+		} else {
+			toggleBit = 0;
+		}
+	}
+	if (toggleBit) {
+		space(RC5_T1);
+		mark(RC5_T1);
+	} else {
+		mark(RC5_T1);
+		space(RC5_T1);
+	}
+
+	// Address
+	for (unsigned long  mask = 1UL << (addressBits - 1);  mask;  mask >>= 1) {
+		if (addr & mask) {
+			space(RC5_T1); // 1 is space, then mark
+			mark(RC5_T1);
+		} else {
+			mark(RC5_T1);
+			space(RC5_T1);
+		}
+	}
+	
+	// Command
+	for (unsigned long  mask = 1UL << (commandBits - 1);  mask;  mask >>= 1) {
+		if (cmd & mask) {
+			space(RC5_T1); // 1 is space, then mark
+			mark(RC5_T1);
+		} else {
+			mark(RC5_T1);
+			space(RC5_T1);
+		}
+	}
+
+	space(0);  // Always end with the LED off
+}
+
 #endif
 
 //+=============================================================================