Revert "Added ESP32 IR receive support (IRsend not implemented yet)."

Merge pull request #425 from marcmerlin/master
Added ESP32 IR receive support (IRsend not implemented yet).
2026-02-08 17:42:40 +00:00 · 2017-04-05 10:27:46 -06:00 · 2017-04-01 12:55:05 -06:00 · 2017-04-01 08:32:37 -07:00 · 2017-03-31 23:10:07 -07:00 · 2017-03-31 22:33:16 -07:00
12 changed files with 605 additions and 571 deletions
--- a/Contributors.md
+++ b/Contributors.md
@@ -5,6 +5,7 @@ These are the active contributors of this project that you may contact if there
  * Email: zetoslab@gmail.com
  * Skype: polarised16
 - [shirriff](https://github.com/shirriff) : An amazing person who worked to create this awesome library and provide unending support
+- [AnalysIR](https:/github.com/AnalysIR): Active contributor and is amazing with providing support!
 - [Informatic](https://github.com/Informatic) : Active contributor
 - [fmeschia](https://github.com/fmeschia) : Active contributor
 - [PaulStoffregen](https://github.com/paulstroffregen) : Active contributor
@@ -15,7 +16,7 @@ These are the active contributors of this project that you may contact if there
 - [Sebazzz](https://github.com/sebazz): Contributor
 - [lumbric](https://github.com/lumbric): Contributor
 - [ElectricRCAircraftGuy](https://github.com/electricrcaircraftguy): Active Contributor
- [henkel](https://github.com/henkel): Contributor
+- [philipphenkel](https://github.com/philipphenkel): Active Contributor
 - [MCUdude](https://github.com/MCUdude): Contributor

 Note: This list is being updated constantly so please let [z3t0](https://github.com/z3t0) know if you have been missed.
--- a/IRremoteInt.h
+++ b/IRremoteInt.h
@@ -68,40 +68,6 @@ irparams_t;
 // Therefore we declare it as "volatile" to stop the compiler/CPU caching it
 EXTERN  volatile irparams_t  irparams;

-//------------------------------------------------------------------------------
-// Defines for blinking the LED
-//
-
-#if defined(CORE_LED0_PIN)
-#	define BLINKLED        CORE_LED0_PIN
-#	define BLINKLED_ON()   (digitalWrite(CORE_LED0_PIN, HIGH))
-#	define BLINKLED_OFF()  (digitalWrite(CORE_LED0_PIN, LOW))
-
-#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-#	define BLINKLED        13
-#	define BLINKLED_ON()   (PORTB |= B10000000)
-#	define BLINKLED_OFF()  (PORTB &= B01111111)
-
-#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
-#	define BLINKLED        0
-#	define BLINKLED_ON()   (PORTD |= B00000001)
-#	define BLINKLED_OFF()  (PORTD &= B11111110)
-
-#else
-#	define BLINKLED        13
-	#define BLINKLED_ON()  (PORTB |= B00100000)
-#	define BLINKLED_OFF()  (PORTB &= B11011111)
-#endif
-
-//------------------------------------------------------------------------------
-// CPU Frequency
-//
-#ifdef F_CPU
-#	define SYSCLOCK  F_CPU     // main Arduino clock
-#else
-#	define SYSCLOCK  16000000  // main Arduino clock
-#endif
-
 //------------------------------------------------------------------------------
 // Defines for setting and clearing register bits
 //
@@ -123,9 +89,6 @@ EXTERN  volatile irparams_t  irparams;
 //                                   Spaces tend to be 100us too short
 #define MARK_EXCESS    100

-// microseconds per clock interrupt tick
-#define USECPERTICK    50
-
 // Upper and Lower percentage tolerances in measurements
 #define TOLERANCE       25
 #define LTOL            (1.0 - (TOLERANCE/100.))
@@ -144,491 +107,7 @@ EXTERN  volatile irparams_t  irparams;
 #define MARK   0
 #define SPACE  1

-//------------------------------------------------------------------------------
-// Define which timer to use
-//
-// Uncomment the timer you wish to use on your board.
-// If you are using another library which uses timer2, you have options to
-//   switch IRremote to use a different timer.
-//
-
-// Arduino Mega
-#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-	//#define IR_USE_TIMER1   // tx = pin 11
-	#define IR_USE_TIMER2     // tx = pin 9
-	//#define IR_USE_TIMER3   // tx = pin 5
-	//#define IR_USE_TIMER4   // tx = pin 6
-	//#define IR_USE_TIMER5   // tx = pin 46
-
-// Teensy 1.0
-#elif defined(__AVR_AT90USB162__)
-	#define IR_USE_TIMER1     // tx = pin 17
-
-// Teensy 2.0
-#elif defined(__AVR_ATmega32U4__)
-	//#define IR_USE_TIMER1   // tx = pin 14
-	//#define IR_USE_TIMER3   // tx = pin 9
-	#define IR_USE_TIMER4_HS  // tx = pin 10
-
-// Teensy 3.0 / Teensy 3.1
-#elif defined(__MK20DX128__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
-	#define IR_USE_TIMER_CMT  // tx = pin 5
-
-// Teensy-LC
-#elif defined(__MKL26Z64__)
-  #define IR_USE_TIMER_TPM1 // tx = pin 16
-
-// Teensy++ 1.0 & 2.0
-#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
-	//#define IR_USE_TIMER1   // tx = pin 25
-	#define IR_USE_TIMER2     // tx = pin 1
-	//#define IR_USE_TIMER3   // tx = pin 16
-
-// MightyCore - ATmega1284
-#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
-	//#define IR_USE_TIMER1   // tx = pin 13
-	#define IR_USE_TIMER2     // tx = pin 14
-	//#define IR_USE_TIMER3   // tx = pin 6
-
-// MightyCore - ATmega164, ATmega324, ATmega644
-#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
-|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
-|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
-|| defined(__AVR_ATmega164P__)
-	//#define IR_USE_TIMER1   // tx = pin 13
-	#define IR_USE_TIMER2     // tx = pin 14
-	
-//MegaCore - ATmega64, ATmega128
-#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
- 	#define IR_USE_TIMER1     // tx = pin 13
-
-// MightyCore - ATmega8535, ATmega16, ATmega32
-#elif defined(__AVR_ATmega8535__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__)
- 	#define IR_USE_TIMER1     // tx = pin 13
-
-// Atmega8
-#elif defined(__AVR_ATmega8__)
-	#define IR_USE_TIMER1     // tx = pin 9
-
-// ATtiny84
-#elif defined(__AVR_ATtiny84__)
-  #define IR_USE_TIMER1     // tx = pin 6
-
-//ATtiny85
-#elif defined(__AVR_ATtiny85__)
-  #define IR_USE_TIMER_TINY0   // tx = pin 1
-
-// Arduino Duemilanove, Diecimila, LilyPad, Mini, Fio, Nano, etc
-// ATmega48, ATmega88, ATmega168, ATmega328
-#else
-	//#define IR_USE_TIMER1   // tx = pin 9
-	#define IR_USE_TIMER2     // tx = pin 3
+// All board specific stuff has been moved to its own file, included here.
+#include "boarddefs.h"

 #endif
-
-//------------------------------------------------------------------------------
-// Defines for Timer
-
-//---------------------------------------------------------
-// Timer2 (8 bits)
-//
-#if defined(IR_USE_TIMER2)
-
-#define TIMER_RESET
-#define TIMER_ENABLE_PWM    (TCCR2A |= _BV(COM2B1))
-#define TIMER_DISABLE_PWM   (TCCR2A &= ~(_BV(COM2B1)))
-#define TIMER_ENABLE_INTR   (TIMSK2 = _BV(OCIE2A))
-#define TIMER_DISABLE_INTR  (TIMSK2 = 0)
-#define TIMER_INTR_NAME     TIMER2_COMPA_vect
-
-#define TIMER_CONFIG_KHZ(val) ({ \
-	const uint8_t pwmval = SYSCLOCK / 2000 / (val); \
-	TCCR2A               = _BV(WGM20); \
-	TCCR2B               = _BV(WGM22) | _BV(CS20); \
-	OCR2A                = pwmval; \
-	OCR2B                = pwmval / 3; \
-})
-
-#define TIMER_COUNT_TOP  (SYSCLOCK * USECPERTICK / 1000000)
-
-//-----------------
-#if (TIMER_COUNT_TOP < 256)
-#	define TIMER_CONFIG_NORMAL() ({ \
-		TCCR2A = _BV(WGM21); \
-		TCCR2B = _BV(CS20); \
-		OCR2A  = TIMER_COUNT_TOP; \
-		TCNT2  = 0; \
-	})
-#else
-#	define TIMER_CONFIG_NORMAL() ({ \
-		TCCR2A = _BV(WGM21); \
-		TCCR2B = _BV(CS21); \
-		OCR2A  = TIMER_COUNT_TOP / 8; \
-		TCNT2  = 0; \
-	})
-#endif
-
-//-----------------
-#if defined(CORE_OC2B_PIN)
-#	define TIMER_PWM_PIN  CORE_OC2B_PIN  // Teensy
-#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-#	define TIMER_PWM_PIN  9              // Arduino Mega
-#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
-|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
-|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
-|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
-|| defined(__AVR_ATmega164P__)
-#	define TIMER_PWM_PIN  14             // MightyCore
-#else
-#	define TIMER_PWM_PIN  3              // Arduino Duemilanove, Diecimila, LilyPad, etc
-#endif					     // ATmega48, ATmega88, ATmega168, ATmega328
-
-//---------------------------------------------------------
-// Timer1 (16 bits)
-//
-#elif defined(IR_USE_TIMER1)
-
-#define TIMER_RESET
-#define TIMER_ENABLE_PWM   (TCCR1A |= _BV(COM1A1))
-#define TIMER_DISABLE_PWM  (TCCR1A &= ~(_BV(COM1A1)))
-
-//-----------------
-#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega8535__) \
-|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__) \
-|| defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
-#	define TIMER_ENABLE_INTR   (TIMSK |= _BV(OCIE1A))
-#	define TIMER_DISABLE_INTR  (TIMSK &= ~_BV(OCIE1A))
-#else
-#	define TIMER_ENABLE_INTR   (TIMSK1 = _BV(OCIE1A))
-#	define TIMER_DISABLE_INTR  (TIMSK1 = 0)
-#endif
-
-//-----------------
-#define TIMER_INTR_NAME       TIMER1_COMPA_vect
-
-#define TIMER_CONFIG_KHZ(val) ({ \
-	const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
-	TCCR1A                = _BV(WGM11); \
-	TCCR1B                = _BV(WGM13) | _BV(CS10); \
-	ICR1                  = pwmval; \
-	OCR1A                 = pwmval / 3; \
-})
-
-#define TIMER_CONFIG_NORMAL() ({ \
-	TCCR1A = 0; \
-	TCCR1B = _BV(WGM12) | _BV(CS10); \
-	OCR1A  = SYSCLOCK * USECPERTICK / 1000000; \
-	TCNT1  = 0; \
-})
-
-//-----------------
-#if defined(CORE_OC1A_PIN)
-#	define TIMER_PWM_PIN  CORE_OC1A_PIN  // Teensy
-#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-#	define TIMER_PWM_PIN  11             // Arduino Mega
-#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
-#	define TIMER_PWM_PIN  13	     // MegaCore
-#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
-|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
-|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
-|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
-|| defined(__AVR_ATmega164P__) || defined(__AVR_ATmega32__) \
-|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega8535__)
-#	define TIMER_PWM_PIN  13             // MightyCore
-#elif defined(__AVR_ATtiny84__)
-# 	define TIMER_PWM_PIN  6
-#else
-#	define TIMER_PWM_PIN  9              // Arduino Duemilanove, Diecimila, LilyPad, etc
-#endif					     // ATmega48, ATmega88, ATmega168, ATmega328
-
-//---------------------------------------------------------
-// Timer3 (16 bits)
-//
-#elif defined(IR_USE_TIMER3)
-
-#define TIMER_RESET
-#define TIMER_ENABLE_PWM     (TCCR3A |= _BV(COM3A1))
-#define TIMER_DISABLE_PWM    (TCCR3A &= ~(_BV(COM3A1)))
-#define TIMER_ENABLE_INTR    (TIMSK3 = _BV(OCIE3A))
-#define TIMER_DISABLE_INTR   (TIMSK3 = 0)
-#define TIMER_INTR_NAME      TIMER3_COMPA_vect
-
-#define TIMER_CONFIG_KHZ(val) ({ \
-  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
-  TCCR3A = _BV(WGM31); \
-  TCCR3B = _BV(WGM33) | _BV(CS30); \
-  ICR3 = pwmval; \
-  OCR3A = pwmval / 3; \
-})
-
-#define TIMER_CONFIG_NORMAL() ({ \
-  TCCR3A = 0; \
-  TCCR3B = _BV(WGM32) | _BV(CS30); \
-  OCR3A = SYSCLOCK * USECPERTICK / 1000000; \
-  TCNT3 = 0; \
-})
-
-//-----------------
-#if defined(CORE_OC3A_PIN)
-#	define TIMER_PWM_PIN  CORE_OC3A_PIN  // Teensy
-#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-#	define TIMER_PWM_PIN  5              // Arduino Mega
-#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
-#	define TIMER_PWM_PIN  6              // MightyCore
-#else
-#	error "Please add OC3A pin number here\n"
-#endif
-
-//---------------------------------------------------------
-// Timer4 (10 bits, high speed option)
-//
-#elif defined(IR_USE_TIMER4_HS)
-
-#define TIMER_RESET
-#define TIMER_ENABLE_PWM    (TCCR4A |= _BV(COM4A1))
-#define TIMER_DISABLE_PWM   (TCCR4A &= ~(_BV(COM4A1)))
-#define TIMER_ENABLE_INTR   (TIMSK4 = _BV(TOIE4))
-#define TIMER_DISABLE_INTR  (TIMSK4 = 0)
-#define TIMER_INTR_NAME     TIMER4_OVF_vect
-
-#define TIMER_CONFIG_KHZ(val) ({ \
-	const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
-	TCCR4A                = (1<<PWM4A); \
-	TCCR4B                = _BV(CS40); \
-	TCCR4C                = 0; \
-	TCCR4D                = (1<<WGM40); \
-	TCCR4E                = 0; \
-	TC4H                  = pwmval >> 8; \
-	OCR4C                 = pwmval; \
-	TC4H                  = (pwmval / 3) >> 8; \
-	OCR4A                 = (pwmval / 3) & 255; \
-})
-
-#define TIMER_CONFIG_NORMAL() ({ \
-	TCCR4A = 0; \
-	TCCR4B = _BV(CS40); \
-	TCCR4C = 0; \
-	TCCR4D = 0; \
-	TCCR4E = 0; \
-	TC4H   = (SYSCLOCK * USECPERTICK / 1000000) >> 8; \
-	OCR4C  = (SYSCLOCK * USECPERTICK / 1000000) & 255; \
-	TC4H   = 0; \
-	TCNT4  = 0; \
-})
-
-//-----------------
-#if defined(CORE_OC4A_PIN)
-#	define TIMER_PWM_PIN  CORE_OC4A_PIN  // Teensy
-#elif defined(__AVR_ATmega32U4__)
-#	define TIMER_PWM_PIN  13             // Leonardo
-#else
-#	error "Please add OC4A pin number here\n"
-#endif
-
-//---------------------------------------------------------
-// Timer4 (16 bits)
-//
-#elif defined(IR_USE_TIMER4)
-
-#define TIMER_RESET
-#define TIMER_ENABLE_PWM    (TCCR4A |= _BV(COM4A1))
-#define TIMER_DISABLE_PWM   (TCCR4A &= ~(_BV(COM4A1)))
-#define TIMER_ENABLE_INTR   (TIMSK4 = _BV(OCIE4A))
-#define TIMER_DISABLE_INTR  (TIMSK4 = 0)
-#define TIMER_INTR_NAME     TIMER4_COMPA_vect
-
-#define TIMER_CONFIG_KHZ(val) ({ \
-  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
-  TCCR4A = _BV(WGM41); \
-  TCCR4B = _BV(WGM43) | _BV(CS40); \
-  ICR4 = pwmval; \
-  OCR4A = pwmval / 3; \
-})
-
-#define TIMER_CONFIG_NORMAL() ({ \
-  TCCR4A = 0; \
-  TCCR4B = _BV(WGM42) | _BV(CS40); \
-  OCR4A = SYSCLOCK * USECPERTICK / 1000000; \
-  TCNT4 = 0; \
-})
-
-//-----------------
-#if defined(CORE_OC4A_PIN)
-#	define TIMER_PWM_PIN  CORE_OC4A_PIN
-#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-#	define TIMER_PWM_PIN  6  // Arduino Mega
-#else
-#	error "Please add OC4A pin number here\n"
-#endif
-
-//---------------------------------------------------------
-// Timer5 (16 bits)
-//
-#elif defined(IR_USE_TIMER5)
-
-#define TIMER_RESET
-#define TIMER_ENABLE_PWM    (TCCR5A |= _BV(COM5A1))
-#define TIMER_DISABLE_PWM   (TCCR5A &= ~(_BV(COM5A1)))
-#define TIMER_ENABLE_INTR   (TIMSK5 = _BV(OCIE5A))
-#define TIMER_DISABLE_INTR  (TIMSK5 = 0)
-#define TIMER_INTR_NAME     TIMER5_COMPA_vect
-
-#define TIMER_CONFIG_KHZ(val) ({ \
-  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
-  TCCR5A = _BV(WGM51); \
-  TCCR5B = _BV(WGM53) | _BV(CS50); \
-  ICR5 = pwmval; \
-  OCR5A = pwmval / 3; \
-})
-
-#define TIMER_CONFIG_NORMAL() ({ \
-  TCCR5A = 0; \
-  TCCR5B = _BV(WGM52) | _BV(CS50); \
-  OCR5A = SYSCLOCK * USECPERTICK / 1000000; \
-  TCNT5 = 0; \
-})
-
-//-----------------
-#if defined(CORE_OC5A_PIN)
-#	define TIMER_PWM_PIN  CORE_OC5A_PIN
-#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-#	define TIMER_PWM_PIN  46  // Arduino Mega
-#else
-#	error "Please add OC5A pin number here\n"
-#endif
-
-//---------------------------------------------------------
-// Special carrier modulator timer
-//
-#elif defined(IR_USE_TIMER_CMT)
-
-#define TIMER_RESET ({     \
-	uint8_t tmp __attribute__((unused)) = CMT_MSC; \
-	CMT_CMD2 = 30;         \
-})
-
-#define TIMER_ENABLE_PWM  do {                                         \
-	CORE_PIN5_CONFIG = PORT_PCR_MUX(2) | PORT_PCR_DSE | PORT_PCR_SRE;  \
-} while(0)
-
-#define TIMER_DISABLE_PWM  do {                                        \
-	CORE_PIN5_CONFIG = PORT_PCR_MUX(1) | PORT_PCR_DSE | PORT_PCR_SRE;  \
-} while(0)
-
-#define TIMER_ENABLE_INTR   NVIC_ENABLE_IRQ(IRQ_CMT)
-#define TIMER_DISABLE_INTR  NVIC_DISABLE_IRQ(IRQ_CMT)
-#define TIMER_INTR_NAME     cmt_isr
-
-//-----------------
-#ifdef ISR
-#	undef ISR
-#endif
-#define  ISR(f)  void f(void)
-
-//-----------------
-#define CMT_PPS_DIV  ((F_BUS + 7999999) / 8000000)
-#if F_BUS < 8000000
-#error IRremote requires at least 8 MHz on Teensy 3.x
-#endif
-
-//-----------------
-#define TIMER_CONFIG_KHZ(val) ({ 	 \
-	SIM_SCGC4 |= SIM_SCGC4_CMT;      \
-	SIM_SOPT2 |= SIM_SOPT2_PTD7PAD;  \
-	CMT_PPS    = CMT_PPS_DIV - 1;    \
-	CMT_CGH1   = ((F_BUS / CMT_PPS_DIV / 3000) + ((val)/2)) / (val); \
-	CMT_CGL1   = ((F_BUS / CMT_PPS_DIV / 1500) + ((val)/2)) / (val); \
-	CMT_CMD1   = 0;                  \
-	CMT_CMD2   = 30;                 \
-	CMT_CMD3   = 0;                  \
-	CMT_CMD4   = 0;                  \
-	CMT_OC     = 0x60;               \
-	CMT_MSC    = 0x01;               \
-})
-
-#define TIMER_CONFIG_NORMAL() ({  \
-	SIM_SCGC4 |= SIM_SCGC4_CMT;   \
-	CMT_PPS    = CMT_PPS_DIV - 1; \
-	CMT_CGH1   = 1;               \
-	CMT_CGL1   = 1;               \
-	CMT_CMD1   = 0;               \
-	CMT_CMD2   = 30;              \
-	CMT_CMD3   = 0;               \
-	CMT_CMD4   = (F_BUS / 160000 + CMT_PPS_DIV / 2) / CMT_PPS_DIV - 31; \
-	CMT_OC     = 0;               \
-	CMT_MSC    = 0x03;            \
-})
-
-#define TIMER_PWM_PIN  5
-
-// defines for TPM1 timer on Teensy-LC
-#elif defined(IR_USE_TIMER_TPM1)
-#define TIMER_RESET          FTM1_SC |= FTM_SC_TOF;
-#define TIMER_ENABLE_PWM     CORE_PIN16_CONFIG = PORT_PCR_MUX(3)|PORT_PCR_DSE|PORT_PCR_SRE
-#define TIMER_DISABLE_PWM    CORE_PIN16_CONFIG = PORT_PCR_MUX(1)|PORT_PCR_SRE
-#define TIMER_ENABLE_INTR    NVIC_ENABLE_IRQ(IRQ_FTM1)
-#define TIMER_DISABLE_INTR   NVIC_DISABLE_IRQ(IRQ_FTM1)
-#define TIMER_INTR_NAME      ftm1_isr
-#ifdef ISR
-#undef ISR
-#endif
-#define ISR(f) void f(void)
-#define TIMER_CONFIG_KHZ(val) ({                     \
-	SIM_SCGC6 |= SIM_SCGC6_TPM1;                 \
-	FTM1_SC = 0;                                 \
-	FTM1_CNT = 0;                                \
-	FTM1_MOD = (F_PLL/2000) / val - 1;           \
-	FTM1_C0V = (F_PLL/6000) / val - 1;           \
-	FTM1_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0);     \
-})
-#define TIMER_CONFIG_NORMAL() ({                     \
-	SIM_SCGC6 |= SIM_SCGC6_TPM1;                 \
-	FTM1_SC = 0;                                 \
-	FTM1_CNT = 0;                                \
-	FTM1_MOD = (F_PLL/40000) - 1;                \
-	FTM1_C0V = 0;                                \
-	FTM1_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0) | FTM_SC_TOF | FTM_SC_TOIE; \
-})
-#define TIMER_PWM_PIN        16
-
-// defines for timer_tiny0 (8 bits)
-#elif defined(IR_USE_TIMER_TINY0)
-#define TIMER_RESET
-#define TIMER_ENABLE_PWM     (TCCR0A |= _BV(COM0B1))
-#define TIMER_DISABLE_PWM    (TCCR0A &= ~(_BV(COM0B1)))
-#define TIMER_ENABLE_INTR    (TIMSK |= _BV(OCIE0A))
-#define TIMER_DISABLE_INTR   (TIMSK &= ~(_BV(OCIE0A)))
-#define TIMER_INTR_NAME      TIMER0_COMPA_vect
-#define TIMER_CONFIG_KHZ(val) ({ \
-  const uint8_t pwmval = SYSCLOCK / 2000 / (val); \
-  TCCR0A = _BV(WGM00); \
-  TCCR0B = _BV(WGM02) | _BV(CS00); \
-  OCR0A = pwmval; \
-  OCR0B = pwmval / 3; \
-})
-#define TIMER_COUNT_TOP      (SYSCLOCK * USECPERTICK / 1000000)
-#if (TIMER_COUNT_TOP < 256)
-#define TIMER_CONFIG_NORMAL() ({ \
-  TCCR0A = _BV(WGM01); \
-  TCCR0B = _BV(CS00); \
-  OCR0A = TIMER_COUNT_TOP; \
-  TCNT0 = 0; \
-})
-#else
-#define TIMER_CONFIG_NORMAL() ({ \
-  TCCR0A = _BV(WGM01); \
-  TCCR0B = _BV(CS01); \
-  OCR0A = TIMER_COUNT_TOP / 8; \
-  TCNT0 = 0; \
-})
-#endif
-
-#define TIMER_PWM_PIN        1  /* ATtiny85 */
-
-//---------------------------------------------------------
-// Unknown Timer
-//
-#else
-#	error "Internal code configuration error, no known IR_USE_TIMER# defined\n"
-#endif
-#endif
--- a/ISSUE_TEMPLATE.md
+++ b/ISSUE_TEMPLATE.md
@@ -14,8 +14,12 @@
 Use [a gist](gist.github.com) if the code exceeds 30 lines

 **checklist:**
+- [] I have **read** the README.md file thoroughly
+- [] I have searched existing issues to see if there is anything I have missed.
 - [] The latest [release](https://github.com/z3t0/Arduino-IRremote/releases/latest) is used
- [] Any code referenced is provided
+- [] Any code referenced is provided and if over 30 lines a gist is linked INSTEAD of it being pasted in here
 - [] The title of the issue is helpful and relevant 

-The above is a short template allowing you to make detailed issues!
+** We will start to close issues that do not follow these guidelines as it doesn't help the contributors who spend time trying to solve issues if the community ignores guidelines!**
+
+The above is a short template allowing you to make detailed issues!
--- a/README.md
+++ b/README.md
@@ -8,7 +8,7 @@ This library enables you to send and receive using infra-red signals on an Ardui

 Tutorials and more information will be made available on [the official homepage](http://z3t0.github.io/Arduino-IRremote/).

-## Version - 2.2.1
+## Version - 2.2.3

 ## Installation
 1. Navigate to the [Releases](https://github.com/z3t0/Arduino-IRremote/releases) page.
@@ -64,8 +64,8 @@ If you want to contribute to this project:
 Check [here](Contributing.md) for some guidelines.

 ## Contact
-The only way to contact me at the moment is by email: zetoslab@gmail.com
-I am not currently monitoring any PRs or Issues due to other issues but will respond to all emails. If anyone wants contributor access, feel free to email me. Or if you find any Issues/PRs to be of importance that my attention is needed please email me.
+Email: zetoslab@gmail.com
+Please only email me if it is more appropriate than creating an Issue / PR. I **will** not respond to requests for adding support for particular boards, unless of course you are the creator of the board and would like to cooperate on the project. I will also **ignore** any emails asking me to tell you how to implement your ideas. However, if you have a private inquiry that you would only apply to you and you would prefer it to be via email, by all means.

 ## Contributors
 Check [here](Contributors.md)
--- a/boarddefs.h
+++ b/boarddefs.h
@@ -0,0 +1,548 @@
+//******************************************************************************
+// IRremote
+// Version 2.0.1 June, 2015
+// Copyright 2009 Ken Shirriff
+// For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
+
+// This file contains all board specific information. It was previously contained within
+// IRremoteInt.h
+
+// Modified by Paul Stoffregen <paul@pjrc.com> to support other boards and timers
+//
+// Interrupt code based on NECIRrcv by Joe Knapp
+// http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
+// Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
+//
+// JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
+// Whynter A/C ARC-110WD added by Francesco Meschia
+//******************************************************************************
+
+#ifndef boarddefs_h
+#define boarddefs_h
+
+//------------------------------------------------------------------------------
+// Defines for blinking the LED
+//
+
+#if defined(CORE_LED0_PIN)
+#	define BLINKLED        CORE_LED0_PIN
+#	define BLINKLED_ON()   (digitalWrite(CORE_LED0_PIN, HIGH))
+#	define BLINKLED_OFF()  (digitalWrite(CORE_LED0_PIN, LOW))
+
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#	define BLINKLED        13
+#	define BLINKLED_ON()   (PORTB |= B10000000)
+#	define BLINKLED_OFF()  (PORTB &= B01111111)
+
+#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
+#	define BLINKLED        0
+#	define BLINKLED_ON()   (PORTD |= B00000001)
+#	define BLINKLED_OFF()  (PORTD &= B11111110)
+
+#else
+#	define BLINKLED        13
+	#define BLINKLED_ON()  (PORTB |= B00100000)
+#	define BLINKLED_OFF()  (PORTB &= B11011111)
+#endif
+
+//------------------------------------------------------------------------------
+// CPU Frequency
+//
+#ifdef F_CPU
+#	define SYSCLOCK  F_CPU     // main Arduino clock
+#else
+#	define SYSCLOCK  16000000  // main Arduino clock
+#endif
+
+// microseconds per clock interrupt tick
+#define USECPERTICK    50
+
+//------------------------------------------------------------------------------
+// Define which timer to use
+//
+// Uncomment the timer you wish to use on your board.
+// If you are using another library which uses timer2, you have options to
+//   switch IRremote to use a different timer.
+//
+
+// Arduino Mega
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+	//#define IR_USE_TIMER1   // tx = pin 11
+	#define IR_USE_TIMER2     // tx = pin 9
+	//#define IR_USE_TIMER3   // tx = pin 5
+	//#define IR_USE_TIMER4   // tx = pin 6
+	//#define IR_USE_TIMER5   // tx = pin 46
+
+// Teensy 1.0
+#elif defined(__AVR_AT90USB162__)
+	#define IR_USE_TIMER1     // tx = pin 17
+
+// Teensy 2.0
+#elif defined(__AVR_ATmega32U4__)
+	//#define IR_USE_TIMER1   // tx = pin 14
+	//#define IR_USE_TIMER3   // tx = pin 9
+	#define IR_USE_TIMER4_HS  // tx = pin 10
+
+// Teensy 3.0 / Teensy 3.1
+#elif defined(__MK20DX128__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
+	#define IR_USE_TIMER_CMT  // tx = pin 5
+
+// Teensy-LC
+#elif defined(__MKL26Z64__)
+  #define IR_USE_TIMER_TPM1 // tx = pin 16
+
+// Teensy++ 1.0 & 2.0
+#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+	//#define IR_USE_TIMER1   // tx = pin 25
+	#define IR_USE_TIMER2     // tx = pin 1
+	//#define IR_USE_TIMER3   // tx = pin 16
+
+// MightyCore - ATmega1284
+#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
+	//#define IR_USE_TIMER1   // tx = pin 13
+	#define IR_USE_TIMER2     // tx = pin 14
+	//#define IR_USE_TIMER3   // tx = pin 6
+
+// MightyCore - ATmega164, ATmega324, ATmega644
+#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
+|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
+|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
+|| defined(__AVR_ATmega164P__)
+	//#define IR_USE_TIMER1   // tx = pin 13
+	#define IR_USE_TIMER2     // tx = pin 14
+	
+//MegaCore - ATmega64, ATmega128
+#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
+ 	#define IR_USE_TIMER1     // tx = pin 13
+
+// MightyCore - ATmega8535, ATmega16, ATmega32
+#elif defined(__AVR_ATmega8535__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__)
+ 	#define IR_USE_TIMER1     // tx = pin 13
+
+// Atmega8
+#elif defined(__AVR_ATmega8__)
+	#define IR_USE_TIMER1     // tx = pin 9
+
+// ATtiny84
+#elif defined(__AVR_ATtiny84__)
+  #define IR_USE_TIMER1     // tx = pin 6
+
+//ATtiny85
+#elif defined(__AVR_ATtiny85__)
+  #define IR_USE_TIMER_TINY0   // tx = pin 1
+
+// Arduino Duemilanove, Diecimila, LilyPad, Mini, Fio, Nano, etc
+// ATmega48, ATmega88, ATmega168, ATmega328
+#else
+	//#define IR_USE_TIMER1   // tx = pin 9
+	#define IR_USE_TIMER2     // tx = pin 3
+
+#endif
+
+//------------------------------------------------------------------------------
+// Defines for Timer
+
+//---------------------------------------------------------
+// Timer2 (8 bits)
+//
+#if defined(IR_USE_TIMER2)
+
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM    (TCCR2A |= _BV(COM2B1))
+#define TIMER_DISABLE_PWM   (TCCR2A &= ~(_BV(COM2B1)))
+#define TIMER_ENABLE_INTR   (TIMSK2 = _BV(OCIE2A))
+#define TIMER_DISABLE_INTR  (TIMSK2 = 0)
+#define TIMER_INTR_NAME     TIMER2_COMPA_vect
+
+#define TIMER_CONFIG_KHZ(val) ({ \
+	const uint8_t pwmval = SYSCLOCK / 2000 / (val); \
+	TCCR2A               = _BV(WGM20); \
+	TCCR2B               = _BV(WGM22) | _BV(CS20); \
+	OCR2A                = pwmval; \
+	OCR2B                = pwmval / 3; \
+})
+
+#define TIMER_COUNT_TOP  (SYSCLOCK * USECPERTICK / 1000000)
+
+//-----------------
+#if (TIMER_COUNT_TOP < 256)
+#	define TIMER_CONFIG_NORMAL() ({ \
+		TCCR2A = _BV(WGM21); \
+		TCCR2B = _BV(CS20); \
+		OCR2A  = TIMER_COUNT_TOP; \
+		TCNT2  = 0; \
+	})
+#else
+#	define TIMER_CONFIG_NORMAL() ({ \
+		TCCR2A = _BV(WGM21); \
+		TCCR2B = _BV(CS21); \
+		OCR2A  = TIMER_COUNT_TOP / 8; \
+		TCNT2  = 0; \
+	})
+#endif
+
+//-----------------
+#if defined(CORE_OC2B_PIN)
+#	define TIMER_PWM_PIN  CORE_OC2B_PIN  // Teensy
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#	define TIMER_PWM_PIN  9              // Arduino Mega
+#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
+|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
+|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
+|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
+|| defined(__AVR_ATmega164P__)
+#	define TIMER_PWM_PIN  14             // MightyCore
+#else
+#	define TIMER_PWM_PIN  3              // Arduino Duemilanove, Diecimila, LilyPad, etc
+#endif					     // ATmega48, ATmega88, ATmega168, ATmega328
+
+//---------------------------------------------------------
+// Timer1 (16 bits)
+//
+#elif defined(IR_USE_TIMER1)
+
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM   (TCCR1A |= _BV(COM1A1))
+#define TIMER_DISABLE_PWM  (TCCR1A &= ~(_BV(COM1A1)))
+
+//-----------------
+#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega8535__) \
+|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__) \
+|| defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
+#	define TIMER_ENABLE_INTR   (TIMSK |= _BV(OCIE1A))
+#	define TIMER_DISABLE_INTR  (TIMSK &= ~_BV(OCIE1A))
+#else
+#	define TIMER_ENABLE_INTR   (TIMSK1 = _BV(OCIE1A))
+#	define TIMER_DISABLE_INTR  (TIMSK1 = 0)
+#endif
+
+//-----------------
+#define TIMER_INTR_NAME       TIMER1_COMPA_vect
+
+#define TIMER_CONFIG_KHZ(val) ({ \
+	const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+	TCCR1A                = _BV(WGM11); \
+	TCCR1B                = _BV(WGM13) | _BV(CS10); \
+	ICR1                  = pwmval; \
+	OCR1A                 = pwmval / 3; \
+})
+
+#define TIMER_CONFIG_NORMAL() ({ \
+	TCCR1A = 0; \
+	TCCR1B = _BV(WGM12) | _BV(CS10); \
+	OCR1A  = SYSCLOCK * USECPERTICK / 1000000; \
+	TCNT1  = 0; \
+})
+
+//-----------------
+#if defined(CORE_OC1A_PIN)
+#	define TIMER_PWM_PIN  CORE_OC1A_PIN  // Teensy
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#	define TIMER_PWM_PIN  11             // Arduino Mega
+#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
+#	define TIMER_PWM_PIN  13	     // MegaCore
+#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
+|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
+|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
+|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
+|| defined(__AVR_ATmega164P__) || defined(__AVR_ATmega32__) \
+|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega8535__)
+#	define TIMER_PWM_PIN  13             // MightyCore
+#elif defined(__AVR_ATtiny84__)
+# 	define TIMER_PWM_PIN  6
+#else
+#	define TIMER_PWM_PIN  9              // Arduino Duemilanove, Diecimila, LilyPad, etc
+#endif					     // ATmega48, ATmega88, ATmega168, ATmega328
+
+//---------------------------------------------------------
+// Timer3 (16 bits)
+//
+#elif defined(IR_USE_TIMER3)
+
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM     (TCCR3A |= _BV(COM3A1))
+#define TIMER_DISABLE_PWM    (TCCR3A &= ~(_BV(COM3A1)))
+#define TIMER_ENABLE_INTR    (TIMSK3 = _BV(OCIE3A))
+#define TIMER_DISABLE_INTR   (TIMSK3 = 0)
+#define TIMER_INTR_NAME      TIMER3_COMPA_vect
+
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR3A = _BV(WGM31); \
+  TCCR3B = _BV(WGM33) | _BV(CS30); \
+  ICR3 = pwmval; \
+  OCR3A = pwmval / 3; \
+})
+
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR3A = 0; \
+  TCCR3B = _BV(WGM32) | _BV(CS30); \
+  OCR3A = SYSCLOCK * USECPERTICK / 1000000; \
+  TCNT3 = 0; \
+})
+
+//-----------------
+#if defined(CORE_OC3A_PIN)
+#	define TIMER_PWM_PIN  CORE_OC3A_PIN  // Teensy
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#	define TIMER_PWM_PIN  5              // Arduino Mega
+#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
+#	define TIMER_PWM_PIN  6              // MightyCore
+#else
+#	error "Please add OC3A pin number here\n"
+#endif
+
+//---------------------------------------------------------
+// Timer4 (10 bits, high speed option)
+//
+#elif defined(IR_USE_TIMER4_HS)
+
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM    (TCCR4A |= _BV(COM4A1))
+#define TIMER_DISABLE_PWM   (TCCR4A &= ~(_BV(COM4A1)))
+#define TIMER_ENABLE_INTR   (TIMSK4 = _BV(TOIE4))
+#define TIMER_DISABLE_INTR  (TIMSK4 = 0)
+#define TIMER_INTR_NAME     TIMER4_OVF_vect
+
+#define TIMER_CONFIG_KHZ(val) ({ \
+	const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+	TCCR4A                = (1<<PWM4A); \
+	TCCR4B                = _BV(CS40); \
+	TCCR4C                = 0; \
+	TCCR4D                = (1<<WGM40); \
+	TCCR4E                = 0; \
+	TC4H                  = pwmval >> 8; \
+	OCR4C                 = pwmval; \
+	TC4H                  = (pwmval / 3) >> 8; \
+	OCR4A                 = (pwmval / 3) & 255; \
+})
+
+#define TIMER_CONFIG_NORMAL() ({ \
+	TCCR4A = 0; \
+	TCCR4B = _BV(CS40); \
+	TCCR4C = 0; \
+	TCCR4D = 0; \
+	TCCR4E = 0; \
+	TC4H   = (SYSCLOCK * USECPERTICK / 1000000) >> 8; \
+	OCR4C  = (SYSCLOCK * USECPERTICK / 1000000) & 255; \
+	TC4H   = 0; \
+	TCNT4  = 0; \
+})
+
+//-----------------
+#if defined(CORE_OC4A_PIN)
+#	define TIMER_PWM_PIN  CORE_OC4A_PIN  // Teensy
+#elif defined(__AVR_ATmega32U4__)
+#	define TIMER_PWM_PIN  13             // Leonardo
+#else
+#	error "Please add OC4A pin number here\n"
+#endif
+
+//---------------------------------------------------------
+// Timer4 (16 bits)
+//
+#elif defined(IR_USE_TIMER4)
+
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM    (TCCR4A |= _BV(COM4A1))
+#define TIMER_DISABLE_PWM   (TCCR4A &= ~(_BV(COM4A1)))
+#define TIMER_ENABLE_INTR   (TIMSK4 = _BV(OCIE4A))
+#define TIMER_DISABLE_INTR  (TIMSK4 = 0)
+#define TIMER_INTR_NAME     TIMER4_COMPA_vect
+
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR4A = _BV(WGM41); \
+  TCCR4B = _BV(WGM43) | _BV(CS40); \
+  ICR4 = pwmval; \
+  OCR4A = pwmval / 3; \
+})
+
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR4A = 0; \
+  TCCR4B = _BV(WGM42) | _BV(CS40); \
+  OCR4A = SYSCLOCK * USECPERTICK / 1000000; \
+  TCNT4 = 0; \
+})
+
+//-----------------
+#if defined(CORE_OC4A_PIN)
+#	define TIMER_PWM_PIN  CORE_OC4A_PIN
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#	define TIMER_PWM_PIN  6  // Arduino Mega
+#else
+#	error "Please add OC4A pin number here\n"
+#endif
+
+//---------------------------------------------------------
+// Timer5 (16 bits)
+//
+#elif defined(IR_USE_TIMER5)
+
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM    (TCCR5A |= _BV(COM5A1))
+#define TIMER_DISABLE_PWM   (TCCR5A &= ~(_BV(COM5A1)))
+#define TIMER_ENABLE_INTR   (TIMSK5 = _BV(OCIE5A))
+#define TIMER_DISABLE_INTR  (TIMSK5 = 0)
+#define TIMER_INTR_NAME     TIMER5_COMPA_vect
+
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR5A = _BV(WGM51); \
+  TCCR5B = _BV(WGM53) | _BV(CS50); \
+  ICR5 = pwmval; \
+  OCR5A = pwmval / 3; \
+})
+
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR5A = 0; \
+  TCCR5B = _BV(WGM52) | _BV(CS50); \
+  OCR5A = SYSCLOCK * USECPERTICK / 1000000; \
+  TCNT5 = 0; \
+})
+
+//-----------------
+#if defined(CORE_OC5A_PIN)
+#	define TIMER_PWM_PIN  CORE_OC5A_PIN
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#	define TIMER_PWM_PIN  46  // Arduino Mega
+#else
+#	error "Please add OC5A pin number here\n"
+#endif
+
+//---------------------------------------------------------
+// Special carrier modulator timer
+//
+#elif defined(IR_USE_TIMER_CMT)
+
+#define TIMER_RESET ({     \
+	uint8_t tmp __attribute__((unused)) = CMT_MSC; \
+	CMT_CMD2 = 30;         \
+})
+
+#define TIMER_ENABLE_PWM  do {                                         \
+	CORE_PIN5_CONFIG = PORT_PCR_MUX(2) | PORT_PCR_DSE | PORT_PCR_SRE;  \
+} while(0)
+
+#define TIMER_DISABLE_PWM  do {                                        \
+	CORE_PIN5_CONFIG = PORT_PCR_MUX(1) | PORT_PCR_DSE | PORT_PCR_SRE;  \
+} while(0)
+
+#define TIMER_ENABLE_INTR   NVIC_ENABLE_IRQ(IRQ_CMT)
+#define TIMER_DISABLE_INTR  NVIC_DISABLE_IRQ(IRQ_CMT)
+#define TIMER_INTR_NAME     cmt_isr
+
+//-----------------
+#ifdef ISR
+#	undef ISR
+#endif
+#define  ISR(f)  void f(void)
+
+//-----------------
+#define CMT_PPS_DIV  ((F_BUS + 7999999) / 8000000)
+#if F_BUS < 8000000
+#error IRremote requires at least 8 MHz on Teensy 3.x
+#endif
+
+//-----------------
+#define TIMER_CONFIG_KHZ(val) ({ 	 \
+	SIM_SCGC4 |= SIM_SCGC4_CMT;      \
+	SIM_SOPT2 |= SIM_SOPT2_PTD7PAD;  \
+	CMT_PPS    = CMT_PPS_DIV - 1;    \
+	CMT_CGH1   = ((F_BUS / CMT_PPS_DIV / 3000) + ((val)/2)) / (val); \
+	CMT_CGL1   = ((F_BUS / CMT_PPS_DIV / 1500) + ((val)/2)) / (val); \
+	CMT_CMD1   = 0;                  \
+	CMT_CMD2   = 30;                 \
+	CMT_CMD3   = 0;                  \
+	CMT_CMD4   = 0;                  \
+	CMT_OC     = 0x60;               \
+	CMT_MSC    = 0x01;               \
+})
+
+#define TIMER_CONFIG_NORMAL() ({  \
+	SIM_SCGC4 |= SIM_SCGC4_CMT;   \
+	CMT_PPS    = CMT_PPS_DIV - 1; \
+	CMT_CGH1   = 1;               \
+	CMT_CGL1   = 1;               \
+	CMT_CMD1   = 0;               \
+	CMT_CMD2   = 30;              \
+	CMT_CMD3   = 0;               \
+	CMT_CMD4   = (F_BUS / 160000 + CMT_PPS_DIV / 2) / CMT_PPS_DIV - 31; \
+	CMT_OC     = 0;               \
+	CMT_MSC    = 0x03;            \
+})
+
+#define TIMER_PWM_PIN  5
+
+// defines for TPM1 timer on Teensy-LC
+#elif defined(IR_USE_TIMER_TPM1)
+#define TIMER_RESET          FTM1_SC |= FTM_SC_TOF;
+#define TIMER_ENABLE_PWM     CORE_PIN16_CONFIG = PORT_PCR_MUX(3)|PORT_PCR_DSE|PORT_PCR_SRE
+#define TIMER_DISABLE_PWM    CORE_PIN16_CONFIG = PORT_PCR_MUX(1)|PORT_PCR_SRE
+#define TIMER_ENABLE_INTR    NVIC_ENABLE_IRQ(IRQ_FTM1)
+#define TIMER_DISABLE_INTR   NVIC_DISABLE_IRQ(IRQ_FTM1)
+#define TIMER_INTR_NAME      ftm1_isr
+#ifdef ISR
+#undef ISR
+#endif
+#define ISR(f) void f(void)
+#define TIMER_CONFIG_KHZ(val) ({                     \
+	SIM_SCGC6 |= SIM_SCGC6_TPM1;                 \
+	FTM1_SC = 0;                                 \
+	FTM1_CNT = 0;                                \
+	FTM1_MOD = (F_PLL/2000) / val - 1;           \
+	FTM1_C0V = (F_PLL/6000) / val - 1;           \
+	FTM1_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0);     \
+})
+#define TIMER_CONFIG_NORMAL() ({                     \
+	SIM_SCGC6 |= SIM_SCGC6_TPM1;                 \
+	FTM1_SC = 0;                                 \
+	FTM1_CNT = 0;                                \
+	FTM1_MOD = (F_PLL/40000) - 1;                \
+	FTM1_C0V = 0;                                \
+	FTM1_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0) | FTM_SC_TOF | FTM_SC_TOIE; \
+})
+#define TIMER_PWM_PIN        16
+
+// defines for timer_tiny0 (8 bits)
+#elif defined(IR_USE_TIMER_TINY0)
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM     (TCCR0A |= _BV(COM0B1))
+#define TIMER_DISABLE_PWM    (TCCR0A &= ~(_BV(COM0B1)))
+#define TIMER_ENABLE_INTR    (TIMSK |= _BV(OCIE0A))
+#define TIMER_DISABLE_INTR   (TIMSK &= ~(_BV(OCIE0A)))
+#define TIMER_INTR_NAME      TIMER0_COMPA_vect
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint8_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR0A = _BV(WGM00); \
+  TCCR0B = _BV(WGM02) | _BV(CS00); \
+  OCR0A = pwmval; \
+  OCR0B = pwmval / 3; \
+})
+#define TIMER_COUNT_TOP      (SYSCLOCK * USECPERTICK / 1000000)
+#if (TIMER_COUNT_TOP < 256)
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR0A = _BV(WGM01); \
+  TCCR0B = _BV(CS00); \
+  OCR0A = TIMER_COUNT_TOP; \
+  TCNT0 = 0; \
+})
+#else
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR0A = _BV(WGM01); \
+  TCCR0B = _BV(CS01); \
+  OCR0A = TIMER_COUNT_TOP / 8; \
+  TCNT0 = 0; \
+})
+#endif
+
+#define TIMER_PWM_PIN        1  /* ATtiny85 */
+
+//---------------------------------------------------------
+// Unknown Timer
+//
+#else
+#	error "Internal code configuration error, no known IR_USE_TIMER# defined\n"
+#endif
+
+#endif // ! boarddefs_h
--- a/changelog.md
+++ b/changelog.md
@@ -1,3 +1,9 @@
+## 2.2.3 - 2017/03/27
+- Fix calculation of pause length in LEGO PF protocol [PR #427](https://github.com/z3t0/Arduino-IRremote/pull/427)
+
+## 2.2.2 - 2017/01/20
+- Fixed naming bug [PR #398](https://github.com/z3t0/Arduino-IRremote/pull/398)
+
 ## 2.2.1 - 2016/07/27
 - Added tests for Lego Power Functions Protocol [PR #336](https://github.com/z3t0/Arduino-IRremote/pull/336)

--- a/examples/IRrecord/IRrecord.ino
+++ b/examples/IRrecord/IRrecord.ino
@@ -126,7 +126,7 @@ void sendCode(int repeat) {
    Serial.println(codeValue, HEX);
  }
  else if (codeType == JVC) {
-    irsend.sendPanasonic(codeValue, codeLen);
+    irsend.sendJVC(codeValue, codeLen, false);
    Serial.print("Sent JVC");
    Serial.println(codeValue, HEX);
  }
--- a/examples/IRrecvDumpV2/IRrecvDumpV2.ino
+++ b/examples/IRrecvDumpV2/IRrecvDumpV2.ino
@@ -66,7 +66,7 @@ void  dumpInfo (decode_results *results)
 {
  // Check if the buffer overflowed
  if (results->overflow) {
-    Serial.println("IR code too long. Edit IRremoteInt.h and increase RAWLEN");
+    Serial.println("IR code too long. Edit IRremoteInt.h and increase RAWBUF");
    return;
  }

--- a/examples/LegoPowerFunctionsTests/LegoPowerFunctionsTests.ino
+++ b/examples/LegoPowerFunctionsTests/LegoPowerFunctionsTests.ino
@@ -1,6 +1,6 @@
 /*
 * LegoPowerFunctionsTest: LEGO Power Functions Tests
- * Copyright (c) 2016 Philipp Henkel
+ * Copyright (c) 2016, 2017 Philipp Henkel
 */

 #include <ir_Lego_PF_BitStreamEncoder.h>
@@ -78,14 +78,14 @@ void testMessageBitCount(LegoPfBitStreamEncoder& bitStreamEncoder) {
  logTestResult(bitCount == 18);
 }

-boolean check(LegoPfBitStreamEncoder& bitStreamEncoder, int markDuration, int pauseDuration) {
+boolean check(LegoPfBitStreamEncoder& bitStreamEncoder, unsigned long markDuration, unsigned long pauseDuration) {
  bool result = true;
  result = result && bitStreamEncoder.getMarkDuration() == markDuration;
  result = result && bitStreamEncoder.getPauseDuration() == pauseDuration;
  return result;
 }

-boolean checkNext(LegoPfBitStreamEncoder& bitStreamEncoder, int markDuration, int pauseDuration) {
+boolean checkNext(LegoPfBitStreamEncoder& bitStreamEncoder, unsigned long markDuration, unsigned long pauseDuration) {
  bool result = bitStreamEncoder.next();
  result = result && check(bitStreamEncoder, markDuration, pauseDuration);
  return result;
@@ -129,16 +129,16 @@ void testMessage407Repeated(LegoPfBitStreamEncoder& bitStreamEncoder) {
  bool result = true;
  result = result && check(bitStreamEncoder, 158, 1026);
  result = result && checkDataBitsOfMessage407(bitStreamEncoder);
-  result = result && checkNext(bitStreamEncoder, 158, 1026 + 5 * 16000 - 10844);
+  result = result && checkNext(bitStreamEncoder, 158, 1026L + 5L * 16000L - 10844L);
  result = result && checkNext(bitStreamEncoder, 158, 1026);
  result = result && checkDataBitsOfMessage407(bitStreamEncoder);
-  result = result && checkNext(bitStreamEncoder, 158, 1026 + 5 * 16000 - 10844);
+  result = result && checkNext(bitStreamEncoder, 158, 1026L + 5L * 16000L - 10844L);
  result = result && checkNext(bitStreamEncoder, 158, 1026);
  result = result && checkDataBitsOfMessage407(bitStreamEncoder);
-  result = result && checkNext(bitStreamEncoder, 158, 1026 + 8 * 16000 - 10844);
+  result = result && checkNext(bitStreamEncoder, 158, 1026L + 8L * 16000L - 10844L);
  result = result && checkNext(bitStreamEncoder, 158, 1026);
  result = result && checkDataBitsOfMessage407(bitStreamEncoder);
-  result = result && checkNext(bitStreamEncoder, 158, 1026 + 8 * 16000 - 10844);
+  result = result && checkNext(bitStreamEncoder, 158, 1026L + 8L * 16000L - 10844L);
  result = result && checkNext(bitStreamEncoder, 158, 1026);
  result = result && checkDataBitsOfMessage407(bitStreamEncoder);
  result = result && checkNext(bitStreamEncoder, 158, 1026);
@@ -191,7 +191,3 @@ void testGetMessageLengthAllLow(LegoPfBitStreamEncoder& bitStreamEncoder) {
  bitStreamEncoder.reset(0x0, false);
  logTestResult(bitStreamEncoder.getMessageLength() == 9104);
 }
-
-
-
-
--- a/ir_Lego_PF_BitStreamEncoder.h
+++ b/ir_Lego_PF_BitStreamEncoder.h
@@ -4,7 +4,7 @@
 //    L       E       E       O    O
 //    L       EEEE    E  EEE  O    O
 //    L       E       E    E  O    O    LEGO Power Functions
-//    LLLLLL  EEEEEE   EEEE    OOOO     Copyright (c) 2016 Philipp Henkel
+//    LLLLLL  EEEEEE   EEEE    OOOO     Copyright (c) 2016, 2017 Philipp Henkel
 //==============================================================================

 //+=============================================================================
@@ -14,25 +14,25 @@ class LegoPfBitStreamEncoder {
 private:
  uint16_t data;
  bool repeatMessage;
-  int messageBitIdx;
-  int repeatCount;
-  int messageLength;
-
-  // HIGH data bit = IR mark + high pause
-  // LOW data bit = IR mark + low pause
-  static const int LOW_BIT_DURATION = 421;
-  static const int HIGH_BIT_DURATION = 711;
-  static const int START_BIT_DURATION = 1184;
-  static const int STOP_BIT_DURATION = 1184;
-  static const int IR_MARK_DURATION = 158;
-  static const int HIGH_PAUSE_DURATION = HIGH_BIT_DURATION - IR_MARK_DURATION;
-  static const int LOW_PAUSE_DURATION = LOW_BIT_DURATION - IR_MARK_DURATION;
-  static const int START_PAUSE_DURATION = START_BIT_DURATION - IR_MARK_DURATION;
-  static const int STOP_PAUSE_DURATION = STOP_BIT_DURATION - IR_MARK_DURATION;
-  static const int MESSAGE_BITS = 18;
-  static const int MAX_MESSAGE_LENGTH = 16000;
+  uint8_t messageBitIdx;
+  uint8_t repeatCount;
+  uint16_t messageLength;

 public:
+  // HIGH data bit = IR mark + high pause
+  // LOW data bit = IR mark + low pause
+  static const uint16_t LOW_BIT_DURATION = 421;
+  static const uint16_t HIGH_BIT_DURATION = 711;
+  static const uint16_t START_BIT_DURATION = 1184;
+  static const uint16_t STOP_BIT_DURATION = 1184;
+  static const uint8_t IR_MARK_DURATION = 158;
+  static const uint16_t HIGH_PAUSE_DURATION = HIGH_BIT_DURATION - IR_MARK_DURATION;
+  static const uint16_t LOW_PAUSE_DURATION = LOW_BIT_DURATION - IR_MARK_DURATION;
+  static const uint16_t START_PAUSE_DURATION = START_BIT_DURATION - IR_MARK_DURATION;
+  static const uint16_t STOP_PAUSE_DURATION = STOP_BIT_DURATION - IR_MARK_DURATION;
+  static const uint8_t MESSAGE_BITS = 18;
+  static const uint16_t MAX_MESSAGE_LENGTH = 16000;
+
  void reset(uint16_t data, bool repeatMessage) {
    this->data = data;
    this->repeatMessage = repeatMessage;
@@ -43,9 +43,9 @@ class LegoPfBitStreamEncoder {

  int getChannelId() const { return 1 + ((data >> 12) & 0x3); }

-  int getMessageLength() const {
+  uint16_t getMessageLength() const {
    // Sum up all marks
-    int length = MESSAGE_BITS * IR_MARK_DURATION;
+    uint16_t length = MESSAGE_BITS * IR_MARK_DURATION;

    // Sum up all pauses
    length += START_PAUSE_DURATION;
@@ -75,9 +75,9 @@ class LegoPfBitStreamEncoder {
    }
  }

-  int getMarkDuration() const { return IR_MARK_DURATION; }
+  uint8_t getMarkDuration() const { return IR_MARK_DURATION; }

-  int getPauseDuration() const {
+  uint32_t getPauseDuration() const {
    if (messageBitIdx == 0)
      return START_PAUSE_DURATION;
    else if (messageBitIdx < MESSAGE_BITS - 1) {
@@ -88,13 +88,13 @@ class LegoPfBitStreamEncoder {
  }

 private:
-  int getDataBitPause() const {
+  uint16_t getDataBitPause() const {
    const int pos = MESSAGE_BITS - 2 - messageBitIdx;
    const bool isHigh = data & (1 << pos);
    return isHigh ? HIGH_PAUSE_DURATION : LOW_PAUSE_DURATION;
  }

-  int getStopPause() const {
+  uint32_t getStopPause() const {
    if (repeatMessage) {
      return getRepeatStopPause();
    } else {
@@ -102,12 +102,12 @@ class LegoPfBitStreamEncoder {
    }
  }

-  int getRepeatStopPause() const {
+  uint32_t getRepeatStopPause() const {
    if (repeatCount == 0 || repeatCount == 1) {
-      return STOP_PAUSE_DURATION + 5 * MAX_MESSAGE_LENGTH - messageLength;
+      return STOP_PAUSE_DURATION + (uint32_t)5 * MAX_MESSAGE_LENGTH - messageLength;
    } else if (repeatCount == 2 || repeatCount == 3) {
      return STOP_PAUSE_DURATION
-             + (6 + 2 * getChannelId()) * MAX_MESSAGE_LENGTH - messageLength;
+             + (uint32_t)(6 + 2 * getChannelId()) * MAX_MESSAGE_LENGTH - messageLength;
    } else {
      return STOP_PAUSE_DURATION;
    }
--- a/library.json
+++ b/library.json
@@ -7,7 +7,7 @@
    "type": "git",
    "url": "https://github.com/z3t0/Arduino-IRremote.git"
  },
-  "version": "2.2.1",
+  "version": "2.2.3",
  "frameworks": "arduino",
  "platforms": "atmelavr",
  "authors" :
--- a/library.properties
+++ b/library.properties
@@ -1,5 +1,5 @@
 name=IRremote
-version=2.2.1
+version=2.2.3
 author=shirriff
 maintainer=shirriff
 sentence=Send and receive infrared signals with multiple protocols
Author	SHA1	Message	Date
Rafi Khan	4cdac5fcc8	Revert "Added ESP32 IR receive support (IRsend not implemented yet)."	2017-04-05 10:27:46 -06:00
Rafi Khan	e0c2649b9f	Merge pull request #425 from marcmerlin/master Added ESP32 IR receive support (IRsend not implemented yet).	2017-04-01 12:55:05 -06:00
Marc MERLIN	419c948c29	Fixed rev to 2.3.3 and added info on timer used.	2017-04-01 08:32:37 -07:00
Marc MERLIN	9133814e60	Rev'ed to 2.2.4.	2017-03-31 23:10:07 -07:00
Marc MERLIN	3875097df9	Merge branch 'master' of github.com:marcmerlin/Arduino-IRremote	2017-03-31 22:33:16 -07:00
Marc MERLIN	88b294a0cd	change no-op defines from '1' to ''.	2017-03-31 22:32:48 -07:00
Marc MERLIN	ffdb6081ae	Merge branch 'master' into master	2017-03-31 22:04:36 -07:00
Marc MERLIN	6b8f2bdbfc	move comment about 'or else' chips that use TIMER2.	2017-03-31 22:01:31 -07:00
Marc MERLIN	eae9de4307	Cleaned up ESP32 integration, reverted ESP32 ifdefs on irreceive examples. - fixed indenting on existing code in a few places for consistency - introduced IR_TIMER_USE_ESP32 for ifdefs within the code as per request - added comments explaining what's missing for irsend support on ESP32 - IRrecvDemo.ino gets a warning before and after interrupt is enabled in case it causes a crash TESTED=IoTuz ESP32 board and original 328p arduino to make sure current code did not break.	2017-03-31 21:52:52 -07:00
Rafi Khan	513e104515	Merge pull request #427 from philipphenkel/lego_pf_integer_overflow_2 Fix calculation of pause length in LEGO PF protocol	2017-03-27 16:25:19 -06:00
Philipp Henkel	ccc9d0135c	Add Lego fix to change and bump version up to 2.2.3	2017-03-27 19:57:25 +02:00
Philipp Henkel	257a15130f	Fix calculation of pause length in LEGO PF protocol Fix #384 Integer overflow in LEGO Power Functions affects pause between messages Is rebased version of PR #385	2017-03-26 22:32:55 +02:00
Marc MERLIN	1b56da6cc7	Rename ESP32 timer name so that it doesn't conflict with other timers.	2017-03-19 21:28:14 -07:00
Marc MERLIN	aa8f7b31fe	Added ESP32 IR receive support (IRsend not implemented yet). - disable a lot of defines not relevant to ESP32, set them to 1 (no-op) - change default IR pin to 35 from 11 - changed serial speed to 115200 (9600 is too slow to keep up with IR input) - irSend disables code that will not compile on ESP32. It won't work, but it won't break compilation either.	2017-03-19 20:27:56 -07:00
Rafi Khan	048efb23a2	Merge pull request #414 from z3t0/z3t0-patch-1 Update ISSUE_TEMPLATE.md	2017-02-06 22:26:51 -06:00
Rafi Khan	4f24b696cf	Update ISSUE_TEMPLATE.md	2017-02-03 21:18:47 -06:00
Rafi Khan	a4cf8bc43e	Merge pull request #406 from z3t0/panasonic-jvc IRrecord.ino typo	2017-01-26 21:11:10 -06:00
Rafi Khan	3b41130ff9	Manual merge of #398	2017-01-22 01:52:14 -06:00
Rafi Khan	96efb5930a	Merge pull request #402 from felipenoris/fn/fix-msg fix example error message	2017-01-14 14:14:16 -06:00
Felipe Noronha	9a74475c8d	fix example error message	2017-01-13 11:58:40 -02:00
Rafi Khan	7c14514beb	Merge pull request #377 from z3t0/z3t0-patch-3 Just gonna put this in here....	2016-11-12 00:02:17 -06:00
Rafi Khan	20b6e3b8a2	Just gonna put this in here....	2016-11-11 22:28:41 -06:00
Rafi Khan	fe27a84d26	Merge pull request #352 from bengtmartensson/boarddefs Move board specific configuration info to new file boarddefs.h	2016-11-08 18:24:09 -06:00
Bengt Martensson	ccbaca5acc	Merge branch 'boarddefs' of github.com:bengtmartensson/Arduino-IRremote into boarddefs	2016-11-07 17:04:41 +01:00
Bengt Martensson	74594847b7	Move board specific configuration info to new file boarddefs.h.	2016-11-07 17:02:34 +01:00
Rafi Khan	85f8aa1e25	Merge pull request #367 from z3t0/z3t0-patch-2 updated readme email notice	2016-10-26 22:05:22 -06:00
Rafi Khan	9ae0239fb7	updated readme email notice far too many emails for things that should be an issue or PR	2016-10-08 02:03:14 -06:00
Bengt Martensson	0d69a1a9ed	Move board specific configuration info to new file boarddefs.h.	2016-08-23 15:23:51 +02:00