mirror of
https://github.com/Theaninova/Brick-Monorail.git
synced 2025-12-12 20:46:22 +00:00
104 lines
4.7 KiB
Markdown
104 lines
4.7 KiB
Markdown
# Brick Monorail
|
|
|
|
Parametric Lego-compatible monorail tracks, designed specifically for 3d printing.
|
|
|
|
Since the parts are made parametric, you can have any length or curve radius you want,
|
|
but these are the original tracks you can replicate
|
|
|
|
As an overview, or why it's worth a try: They print rapidly on modern printers, and cost barely anything.
|
|
|
|
| Name | Material Cost | Print Time |
|
|
| --------------------- | ------------- | ---------- |
|
|
| C15 | ~10ct | 45m |
|
|
| C7 | ~5ct | 15m |
|
|
| S21 | ~12ct | 1h |
|
|
| S7 | ~5ct | 15m |
|
|
| S6 | ~5ct | 15m |
|
|
| Classic R28 90° Curve | ~25ct | 2h |
|
|
| Classic R28 45° Curve | ~12ct | 1h |
|
|
| Classic L32 Straight | ~20ct | 1.5h |
|
|
| Classic L16 Straight | ~10ct | 45m |
|
|
| Classic L8 Straight | ~5ct | 15m |
|
|
|
|
Todo: ramps, switches, train assembly
|
|
|
|
## Design differences
|
|
|
|
Injection molding has vastly different requirements to 3d printing.
|
|
Due to this the original rails print absolutely horribly due to the copious amounts of supports needed.
|
|
Surfaces printed on supports just never look good.
|
|
|
|
Because of that, I decided to instead of having a support part on the bottom, I'd carve out space for
|
|
a 1x2 plate, which you can fit there for the same effect.
|
|
|
|
The monorail tracks are also solid now, which is not something you can do in injection molding but leaves
|
|
a really nice surface finish at the bottom of the rail for us.
|
|
|
|
For now, I also use non-baseplate aligned joints for curves. While this means you can't just snap the rails
|
|
on a baseplate, it enables you to use straight rails at non-90 degree angles which I think is an absolute
|
|
win over the original design since the 45 degree curves are useless outside of joining them with switches.
|
|
|
|
_These are 3d printing optimized, compatible rails, not replicas. Replicas print horribly due to support._
|
|
|
|
### Optional Differences
|
|
|
|
#### Operating on r25 instead of r28
|
|
|
|
What difference do these three studs make?
|
|
With this radius we can take advantage of the pythagorean triples `3/4/5` and `7/24/25` to stay on the stud
|
|
grid with turntables.
|
|
|
|
- Curve C15
|
|
- Curve C7
|
|
- Straight S21
|
|
- Straight S7
|
|
- Straight S6
|
|
|
|
Two C15 and one C7 make exactly a 90 degree turn, where every part stays on the stud grid.
|
|
|
|
An s-curve with C7 moves two studs, and can be extended by 1 stud
|
|
with S7 or 3 studs with S21.
|
|
|
|
An s-curve with C15 moves over 20 studs, and can be extended by 8 studs
|
|
with S6 or 28 studs with S21 straights.
|
|
|
|
## Printing
|
|
|
|
To be compatible with standard bricks, the following print settings are strongly advised
|
|
|
|
- Nozzle: **0.4**, this is equivalent to 1 LDU.
|
|
- Layer height: **0.2** will also do. Refrain from using 0.15, since that does not cleanly divides the LDU.
|
|
- Make sure your initial layer height is either 0.2 or 0.4!
|
|
- Supports: **yes**, normal, don't use tree supports.
|
|
what you would call easy for the printer, so be on the lookout.
|
|
- Set your "Initial Layer Horizontal Expansion" to a value that works for you, for example -0.2mm to compensate for elephant's foot.
|
|
Alternatively, you can trim the extra plastic off by hand.
|
|
|
|
My prints were done on a modified SecKit SK-Go2 running Klipper, with 10k acceleration and 150mm/s print speed for a good
|
|
balance of speed and quality. A short rail will take about an hour to print.
|
|
|
|
### Filament
|
|
|
|
| Color | RAL Color | Pantone | PLA Supplier | ABS Supplier |
|
|
| ----------------- | ---------- | ------- | ------------ | ------------ |
|
|
| Light Bluish Gray | `RAL 7040` | | dasfilament | |
|
|
| Light Gray | `RAL 7005` | | | |
|
|
|
|
- None of these colors will be an exact match, just the texture of 3d printing it can make a huge difference, but usually fall close enough in the range.
|
|
- The original rails will be in _Light Gray_, not _Light Bluish Gray_, but since I barely own any pre- 2004 color change bricks I chose to match my other bricks instead.
|
|
|
|
_Notes for newcomers:_
|
|
|
|
- Most bricks are injection molded from ABS, however I find PLA to be much more easy and safe to handle.
|
|
- PLA starts to deform at 60°C, so don't leave it in the sun or in your car.
|
|
- PLA is brittle. While ABS deforms with force applied to it, PLA will just snap.
|
|
- ABS is harder to print, an enclosure is a must, and warping can be difficult to handle.
|
|
|
|
#### Printing Safety
|
|
|
|
In case you are new to 3D printing:
|
|
|
|
- Most filaments (including PLA) release toxic gases when _burned_
|
|
- FDM printing can cause fine particle emission
|
|
- ABS when heated to normal printing temperatures can release styrene fumes
|