Added to changelog

Conflicts:
	IRremote.cpp
	IRremote.h
* Saves lots of precious ram
* Debug Improvement
* Minor refactoring
* Better Install Instructions
* Using F() Macro

Credits: @zt30 and @fab672000.
Merged PR: #109

Contributors.md

@@ -10,7 +10,6 @@ These are the active contributors of this project that you may contact if there
 - [PaulStoffregen](https://github.com/paulstroffregen) : Active contributor
 - [crash7](https://github.com/crash7) : Active contributor
 - [Neco777](https://github.com/neco777) : Active contributor
-- [Lauszus](https://github.com/lauszus) : Active contributor
 
 Note: This list is being updated constantly so please let [z3t0](https://github.com/z3t0) know if you have been missed.
 

IRremote.h

@@ -1,49 +1,3 @@
-#define DEBUG
-#undef DEBUG
-
-//------------------------------------------------------------------------------
-int  MATCH_SPACE (int measured_ticks, int desired_us) ;
-int  MATCH_MARK  (int measured_ticks, int desired_us) ;
-int  MATCH       (int measured, int desired) ;
-
-//------------------------------------------------------------------------------
-// Debug directives
-#ifdef DEBUG
-#	define DBG_PRINT(...)    Serial.print(__VA_ARGS__)
-#	define DBG_PRINTLN(...)  Serial.println(__VA_ARGS__)
-#else
-#	define DBG_PRINT(...)
-#	define DBG_PRINTLN(...)
-#endif
-
-///int  MATCH (int measured,  int desired);
-///int  MATCH_MARK (int measured_ticks,  int desired_us);
-///int  MATCH_SPACE (int measured_ticks,  int desired_us);
-
-#define SEND_NEC
-#define DECODE_NEC
-#define SEND_WHYNTER
-#define DECODE_WHYNTER
-#define SEND_SONY
-#define DECODE_SONY
-#define DECODE_SANYO
-#define SEND_RC5
-#define DECODE_RC5
-#define SEND_RC6
-#define DECODE_RC6
-#define SEND_PANASONIC
-#define DECODE_PANASONIC
-#define SEND_JVC
-#define DECODE_JVC
-#define SEND_SAMSUNG
-#define DECODE_SAMSUNG
-#define DECODE_LG
-#define DECODE_MITSUBISHI
-#define SEND_AIWA_RC_T501
-#define DECODE_AIWA_RC_T501
-#define SEND_SHARP
-#define SEND_DISH
-
 /*
  * IRremote
  * Version 0.1 July, 2009
@@ -63,6 +17,13 @@ int  MATCH       (int measured, int desired) ;
 #ifndef IRremote_h
 #define IRremote_h
 
+#if defined(ARDUINO) && ARDUINO >= 100
+#include <Arduino.h>
+#else
+#include <WProgram.h>
+#endif
+
+
 // The following are compile-time library options.
 // If you change them, recompile the library.
 // If DEBUG is defined, a lot of debugging output will be printed during decoding.
@@ -71,39 +32,40 @@ int  MATCH       (int measured, int desired) ;
 //#define DEBUG
 // #define TEST
 
-enum decode_type_t {
-	UNKNOWN      = -1,
-	UNUSED       =  0,
-	NEC          =  1,
-	SONY         =  2,
-	RC5          =  3,
-	RC6          =  4,
-	DISH         =  5,
-	SHARP        =  6,
-	PANASONIC    =  7,
-	JVC          =  8,
-	SANYO        =  9,
-	MITSUBISHI   = 10,
-	SAMSUNG      = 11,
-	LG           = 12,
-	WHYNTER      = 13,
-	AIWA_RC_T501 = 14,
-};
-
 // Results returned from the decoder
 class decode_results {
 public:
-  decode_type_t decode_type; // NEC, SONY, RC5, UNKNOWN
+  int8_t decode_type; 	// NEC, SONY, RC5, UNKNOWN
+  int8_t bits; 			// Number of bits in decoded value
+  unsigned long value; 	// Decoded value
+
   union { // This is used for decoding Panasonic and Sharp data
     unsigned int panasonicAddress;
     unsigned int sharpAddress;
   };
-  unsigned long value; // Decoded value
-  int bits; // Number of bits in decoded value
+
   volatile unsigned int *rawbuf; // Raw intervals in .5 us ticks
   int rawlen; // Number of records in rawbuf.
 };
 
+// Values for decode_type
+#define NEC 1
+#define SONY 2
+#define RC5 3
+#define RC6 4
+#define DISH 5
+#define SHARP 6
+#define PANASONIC 7
+#define JVC 8
+#define SANYO 9
+#define MITSUBISHI 10
+#define SAMSUNG 11
+#define LG 12
+#define WHYNTER 13
+#define Sharp 14
+#define AIWA_RC_T501 15
+#define UNKNOWN -1
+
 // Decoded value for NEC when a repeat code is received
 #define REPEAT 0xffffffff
 
@@ -119,45 +81,19 @@ public:
 private:
   // These are called by decode
   int getRClevel(decode_results *results, int *offset, int *used, int t1);
-#ifdef DECODE_NEC
   long decodeNEC(decode_results *results);
-#endif
-#ifdef DECODE_SONY
   long decodeSony(decode_results *results);
-#endif
-#ifdef DECODE_SANYO
+  long decodeSharp(decode_results *results);
   long decodeSanyo(decode_results *results);
-#endif
-#ifdef DECODE_MITSUBISHI
   long decodeMitsubishi(decode_results *results);
-#endif
-#ifdef DECODE_RC5
   long decodeRC5(decode_results *results);
-#endif
-#ifdef DECODE_RC6
   long decodeRC6(decode_results *results);
-#endif
-#ifdef DECODE_PANASONIC
   long decodePanasonic(decode_results *results);
-#endif
-#ifdef DECODE_LG
   long decodeLG(decode_results *results);
-#endif
-#ifdef DECODE_JVC
   long decodeJVC(decode_results *results);
-#endif
-#ifdef DECODE_SAMSUNG
   long decodeSAMSUNG(decode_results *results);
-#endif
-
-#ifdef DECODE_WHYNTER
   long decodeWhynter(decode_results *results);
-#endif
-
-#ifdef DECODE_AIWA_RC_T501
   long decodeAiwaRCT501(decode_results *results);
-#endif
-
   long decodeHash(decode_results *results);
   int compare(unsigned int oldval, unsigned int newval);
 
@@ -174,44 +110,23 @@ class IRsend
 {
 public:
   IRsend() {}
-  void sendRaw(unsigned int buf[], int len, int hz);
-#ifdef SEND_RC5
-  void sendRC5(unsigned long data, int nbits);
-#endif
-#ifdef SEND_RC6
-  void sendRC6(unsigned long data, int nbits);
-#endif
-#ifdef SEND_WHYNTER
   void sendWhynter(unsigned long data, int nbits);
-#endif
-#ifdef SEND_NEC
   void sendNEC(unsigned long data, int nbits);
-#endif
-#ifdef SEND_SONY
   void sendSony(unsigned long data, int nbits);
   // Neither Sanyo nor Mitsubishi send is implemented yet
   //  void sendSanyo(unsigned long data, int nbits);
   //  void sendMitsubishi(unsigned long data, int nbits);
-#endif
-#ifdef SEND_DISH
+  void sendRaw(unsigned int buf[], int len, int hz);
+  void sendRC5(unsigned long data, int nbits);
+  void sendRC6(unsigned long data, int nbits);
   void sendDISH(unsigned long data, int nbits);
-#endif
-#ifdef SEND_SHARP
+  void sendSharp(unsigned int address, unsigned int command);
   void sendSharpRaw(unsigned long data, int nbits);
-  void sendSharp(unsigned int address,  unsigned int command);
-#endif
-#ifdef SEND_PANASONIC
   void sendPanasonic(unsigned int address, unsigned long data);
-#endif
-#ifdef SEND_JVC
   void sendJVC(unsigned long data, int nbits, int repeat); // *Note instead of sending the REPEAT constant if you want the JVC repeat signal sent, send the original code value and change the repeat argument from 0 to 1. JVC protocol repeats by skipping the header NOT by sending a separate code value like NEC does.
-#endif
-#ifdef SEND_AIWA_RC_T501
   void sendAiwaRCT501(int code);
-#endif
-#ifdef SEND_SAMSUNG
+  // private:
   void sendSAMSUNG(unsigned long data, int nbits);
-#endif
   void enableIROut(int khz);
   VIRTUAL void mark(int usec);
   VIRTUAL void space(int usec);

IRremoteInt.h

@@ -17,12 +17,6 @@
 #ifndef IRremoteint_h
 #define IRremoteint_h
 
-#ifdef IR_GLOBAL
-#	define EXTERN
-#else
-#	define EXTERN extern
-#endif
-
 #if defined(ARDUINO) && ARDUINO >= 100
 #include <Arduino.h>
 #else
@@ -101,27 +95,118 @@
 // Pulse parms are *50-100 for the Mark and *50+100 for the space
 // First MARK is the one after the long gap
 // pulse parameters in usec
+#define WHYNTER_HDR_MARK	2850
+#define WHYNTER_HDR_SPACE	2850
+#define WHYNTER_BIT_MARK	750
+#define WHYNTER_ONE_MARK	750
+#define WHYNTER_ONE_SPACE	2150
+#define WHYNTER_ZERO_MARK	750
+#define WHYNTER_ZERO_SPACE	750
+
+#define NEC_HDR_MARK	9000
+#define NEC_HDR_SPACE	4500
+#define NEC_BIT_MARK	560
+#define NEC_ONE_SPACE	1690
+#define NEC_ZERO_SPACE	560
+#define NEC_RPT_SPACE	2250
+
+#define SONY_HDR_MARK	2400
+#define SONY_HDR_SPACE	600
+#define SONY_ONE_MARK	1200
+#define SONY_ZERO_MARK	600
+#define SONY_RPT_LENGTH 45000
+#define SONY_DOUBLE_SPACE_USECS  500  // usually ssee 713 - not using ticks as get number wrapround
+
+// SA 8650B
+#define SANYO_HDR_MARK	3500  // seen range 3500
+#define SANYO_HDR_SPACE	950 //  seen 950
+#define SANYO_ONE_MARK	2400 // seen 2400  
+#define SANYO_ZERO_MARK 700 //  seen 700
+#define SANYO_DOUBLE_SPACE_USECS  800  // usually ssee 713 - not using ticks as get number wrapround
+#define SANYO_RPT_LENGTH 45000
+
+// Mitsubishi RM 75501
+// 14200 7 41 7 42 7 42 7 17 7 17 7 18 7 41 7 18 7 17 7 17 7 18 7 41 8 17 7 17 7 18 7 17 7 
+
+// #define MITSUBISHI_HDR_MARK	250  // seen range 3500
+#define MITSUBISHI_HDR_SPACE	350 //  7*50+100
+#define MITSUBISHI_ONE_MARK	1950 // 41*50-100
+#define MITSUBISHI_ZERO_MARK  750 // 17*50-100
+// #define MITSUBISHI_DOUBLE_SPACE_USECS  800  // usually ssee 713 - not using ticks as get number wrapround
+// #define MITSUBISHI_RPT_LENGTH 45000
 
 
+#define RC5_T1		889
+#define RC5_RPT_LENGTH	46000
+
+#define RC6_HDR_MARK	2666
+#define RC6_HDR_SPACE	889
+#define RC6_T1		444
+#define RC6_RPT_LENGTH	46000
+
+#define SHARP_BIT_MARK 245
+#define SHARP_ONE_SPACE 1805
+#define SHARP_ZERO_SPACE 795
+#define SHARP_GAP 600000
+#define SHARP_TOGGLE_MASK 0x3FF
+#define SHARP_RPT_SPACE 950 // 40ms
+
+#define DISH_HDR_MARK 400
+#define DISH_HDR_SPACE 6100
+#define DISH_BIT_MARK 400
+#define DISH_ONE_SPACE 1700
+#define DISH_ZERO_SPACE 2800
+#define DISH_RPT_SPACE 6200
+#define DISH_TOP_BIT 0x8000
+
+#define PANASONIC_HDR_MARK 3502
+#define PANASONIC_HDR_SPACE 1750
+#define PANASONIC_BIT_MARK 502
+#define PANASONIC_ONE_SPACE 1244
+#define PANASONIC_ZERO_SPACE 400
+
+#define JVC_HDR_MARK 8000
+#define JVC_HDR_SPACE 4000
+#define JVC_BIT_MARK 600
+#define JVC_ONE_SPACE 1600
+#define JVC_ZERO_SPACE 550
+#define JVC_RPT_LENGTH 60000
+
+#define LG_HDR_MARK 8000
+#define LG_HDR_SPACE 4000
+#define LG_BIT_MARK 600
+#define LG_ONE_SPACE 1600
+#define LG_ZERO_SPACE 550
+#define LG_RPT_LENGTH 60000
+
+#define SAMSUNG_HDR_MARK  5000
+#define SAMSUNG_HDR_SPACE 5000
+#define SAMSUNG_BIT_MARK  560
+#define SAMSUNG_ONE_SPACE 1600
+#define SAMSUNG_ZERO_SPACE  560
+#define SAMSUNG_RPT_SPACE 2250
 
 
+#define SHARP_BITS 15
+#define DISH_BITS 16
 
-
-
-
-
-
-
-
-
-
-
-
+// AIWA RC T501
+// Lirc file http://lirc.sourceforge.net/remotes/aiwa/RC-T501 
+#define AIWA_RC_T501_HZ 38
+#define AIWA_RC_T501_BITS 15
+#define AIWA_RC_T501_PRE_BITS 26
+#define AIWA_RC_T501_POST_BITS 1
+#define AIWA_RC_T501_SUM_BITS AIWA_RC_T501_PRE_BITS+AIWA_RC_T501_BITS+AIWA_RC_T501_POST_BITS
+#define AIWA_RC_T501_HDR_MARK 8800
+#define AIWA_RC_T501_HDR_SPACE 4500
+#define AIWA_RC_T501_BIT_MARK 500
+#define AIWA_RC_T501_ONE_SPACE 600
+#define AIWA_RC_T501_ZERO_SPACE 1700
 
 
 #define TOLERANCE 25  // percent tolerance in measurements
-#define LTOL (1.0 - TOLERANCE/100.)
-#define UTOL (1.0 + TOLERANCE/100.)
+#define LTOL (1.0 - TOLERANCE/100.) 
+#define UTOL (1.0 + TOLERANCE/100.) 
 
 #define _GAP 5000 // Minimum map between transmissions
 #define GAP_TICKS (_GAP/USECPERTICK)
@@ -143,11 +228,11 @@ typedef struct {
   unsigned int timer;     // state timer, counts 50uS ticks.
   unsigned int rawbuf[RAWBUF]; // raw data
   uint8_t rawlen;         // counter of entries in rawbuf
-}
+} 
 irparams_t;
 
 // Defined in IRremote.cpp
-EXTERN volatile irparams_t irparams;
+extern volatile irparams_t irparams;
 
 // IR detector output is active low
 #define MARK  0
@@ -155,6 +240,21 @@ EXTERN volatile irparams_t irparams;
 
 #define TOPBIT 0x80000000
 
+#define NEC_BITS 32
+#define SONY_BITS 12
+#define SANYO_BITS 12
+#define MITSUBISHI_BITS 16
+#define MIN_RC5_SAMPLES 11
+#define MIN_RC6_SAMPLES 1
+#define PANASONIC_BITS 48
+#define JVC_BITS 16
+#define LG_BITS 28
+#define SAMSUNG_BITS 32
+#define WHYNTER_BITS 32
+
+
+
+
 // defines for timer2 (8 bits)
 #if defined(IR_USE_TIMER2)
 #define TIMER_RESET
@@ -203,8 +303,8 @@ EXTERN volatile irparams_t irparams;
 #define TIMER_ENABLE_PWM     (TCCR1A |= _BV(COM1A1))
 #define TIMER_DISABLE_PWM    (TCCR1A &= ~(_BV(COM1A1)))
 #if defined(__AVR_ATmega8P__) || defined(__AVR_ATmega8__)
-  #define TIMER_ENABLE_INTR    (TIMSK |= _BV(OCIE1A))
-  #define TIMER_DISABLE_INTR   (TIMSK &= ~_BV(OCIE1A))
+  #define TIMER_ENABLE_INTR    (TIMSK = _BV(OCIE1A))
+  #define TIMER_DISABLE_INTR   (TIMSK = 0)
 #else
   #define TIMER_ENABLE_INTR    (TIMSK1 = _BV(OCIE1A))
   #define TIMER_DISABLE_INTR   (TIMSK1 = 0)

README.md

@@ -1,24 +1,17 @@
-NOTE: THIS NEEDS TO BE FIXED.... PLEASE JUST USE THE LATEST RELEASE AND NOT THE MASTER BRANCH!!!!
 # IRremote Arduino Library
 This library enables you to send and receive using infra-red signals on an arduino.
 
 Check [here](http://shirriff.github.io/Arduino-IRremote/) for tutorials and more information.
 
-## Version - 1.00
+## Version - 1.01
 
+ 
 ## Installation
 1. Navigate to the [Releases](https://github.com/shirriff/Arduino-IRremote/releases) page.
 2. Download the latest release.
 3. Extract the zip file
 4. Move the "IRremote" folder that has been extracted to your libraries directory.
 
-## Usage
-We get a lot of support for different device types. To keep the size of the library manageable we're moving to a model where different device types use a #define statement, for instance:
-
-```#define SHARP```
-
-You'd put this at the top of your sketch to include the sendSharp() and decodeSharp() methods in your code. This way your sketch only uses the Sharp functions but not the LG, JVC, Sony, etc functions, thus saving you program space that you might want to use for other things. This allows us to support lots of devices without making the library too big.
-
 ## Contributing
 If you want to contribute to this project:
 - Report bugs and errors

changelog.md

@@ -0,0 +1,13 @@
+# Change Log
+All notable changes to this project will be documented in this file.
+This project adheres to [Semantic Versioning](http://semver.org/).
+
+## [1.0.1] - 2015-03-08
+### Added
+- Support for Sharp Decoding
+- Support for Aiwa Decoding
+- Changelog documentation
+
+### Changed
+- Improved memory management in debugging
+- Use of F() macro saves RAM

examples/AiwaRCT501SendDemo/AiwaRCT501SendDemo.ino

@@ -9,7 +9,6 @@
 #include "IRremote.h"
 
 #define POWER 0x7F80
-#define AIWA_RC_T501
 
 IRsend irsend;
 

examples/IRrecvDump/IRrecvDump.ino

@@ -49,6 +49,11 @@ void dump(decode_results *results) {
     Serial.print(results->panasonicAddress,HEX);
     Serial.print(" Value: ");
   }
+  else if (results->decode_type == SHARP) {	
+    Serial.print("Decoded SHARP - Address: ");
+    Serial.print(results->sharpAddress,HEX);
+    Serial.print(" Value: ");
+  }
   else if (results->decode_type == LG) {
      Serial.print("Decoded LG: ");
   }

irISR.cpp

@@ -1,76 +0,0 @@
-#include <avr/interrupt.h>
-
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//+=============================================================================
-// TIMER2 interrupt code to collect raw data.
-// Widths of alternating SPACE, MARK are recorded in rawbuf.
-// Recorded in ticks of 50 microseconds.
-// rawlen counts the number of entries recorded so far.
-// First entry is the SPACE between transmissions.
-// As soon as a SPACE gets long, ready is set, state switches to IDLE, timing of SPACE continues.
-// As soon as first MARK arrives, gap width is recorded, ready is cleared, and new logging starts
-//
-ISR (TIMER_INTR_NAME)
-{
-  TIMER_RESET;
-
-  uint8_t irdata = (uint8_t)digitalRead(irparams.recvpin);
-
-  irparams.timer++; // One more 50us tick
-  if (irparams.rawlen >= RAWBUF)  irparams.rcvstate = STATE_STOP ;  // Buffer overflow
-
-  switch(irparams.rcvstate) {
-    case STATE_IDLE: // In the middle of a gap
-      if (irdata == MARK) {
-        if (irparams.timer < GAP_TICKS) {
-          // Not big enough to be a gap.
-          irparams.timer = 0;
-        }
-        else {
-          // gap just ended, record duration and start recording transmission
-          irparams.rawlen = 0;
-          irparams.rawbuf[irparams.rawlen++] = irparams.timer;
-          irparams.timer = 0;
-          irparams.rcvstate = STATE_MARK;
-        }
-      }
-      break;
-
-    case STATE_MARK: // timing MARK
-      if (irdata == SPACE) {   // MARK ended, record time
-        irparams.rawbuf[irparams.rawlen++] = irparams.timer;
-        irparams.timer = 0;
-        irparams.rcvstate = STATE_SPACE;
-      }
-      break;
-
-    case STATE_SPACE: // timing SPACE
-      if (irdata == MARK) { // SPACE just ended, record it
-        irparams.rawbuf[irparams.rawlen++] = irparams.timer;
-        irparams.timer = 0;
-        irparams.rcvstate = STATE_MARK;
-      }
-      else { // SPACE
-        if (irparams.timer > GAP_TICKS) {
-          // big SPACE, indicates gap between codes
-          // Mark current code as ready for processing
-          // Switch to STOP
-          // Don't reset timer; keep counting space width
-          irparams.rcvstate = STATE_STOP;
-        }
-      }
-      break;
-
-    case STATE_STOP: // waiting, measuring gap
-      if (irdata == MARK)  irparams.timer = 0 ;  // reset gap timer
-      break;
-  }
-
-  if (irparams.blinkflag) {
-    if (irdata == MARK)  BLINKLED_ON() ;   // turn pin 13 LED on
-    else                 BLINKLED_OFF() ;  // turn pin 13 LED off
-  }
-}
-

irRecv.cpp

@@ -1,195 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//+=============================================================================
-IRrecv::IRrecv (int recvpin)
-{
-	irparams.recvpin = recvpin;
-	irparams.blinkflag = 0;
-}
-
-//+=============================================================================
-// initialization
-//
-void  IRrecv::enableIRIn ( )
-{
-	cli();
-	// setup pulse clock timer interrupt
-	//Prescale /8 (16M/8 = 0.5 microseconds per tick)
-	// Therefore, the timer interval can range from 0.5 to 128 microseconds
-	// depending on the reset value (255 to 0)
-	TIMER_CONFIG_NORMAL();
-
-	//Timer2 Overflow Interrupt Enable
-	TIMER_ENABLE_INTR;
-
-	TIMER_RESET;
-
-	sei();  // enable interrupts
-
-	// initialize state machine variables
-	irparams.rcvstate = STATE_IDLE;
-	irparams.rawlen = 0;
-
-	// set pin modes
-	pinMode(irparams.recvpin, INPUT);
-}
-
-//+=============================================================================
-// enable/disable blinking of pin 13 on IR processing
-//
-void  IRrecv::blink13 (int blinkflag)
-{
-	irparams.blinkflag = blinkflag;
-	if (blinkflag)  pinMode(BLINKLED, OUTPUT) ;
-}
-
-//+=============================================================================
-void  IRrecv::resume ( )
-{
-	irparams.rcvstate = STATE_IDLE;
-	irparams.rawlen = 0;
-}
-
-
-
-
-
-
-
-
-
-
-
-
-
-//+=============================================================================
-// Decodes the received IR message
-// Returns 0 if no data ready, 1 if data ready.
-// Results of decoding are stored in results
-int  IRrecv::decode (decode_results *results)
-{
-	results->rawbuf = irparams.rawbuf;
-	results->rawlen = irparams.rawlen;
-
-	if (irparams.rcvstate != STATE_STOP)  return false ;
-
-#ifdef DECODE_NEC
-	DBG_PRINTLN("Attempting NEC decode");
-	if (decodeNEC(results))  return true ;
-#endif
-
-#ifdef DECODE_SONY
-	DBG_PRINTLN("Attempting Sony decode");
-	if (decodeSony(results))  return true ;
-#endif
-
-#ifdef DECODE_SANYO
-	DBG_PRINTLN("Attempting Sanyo decode");
-	if (decodeSanyo(results))  return true ;
-#endif
-
-#ifdef DECODE_MITSUBISHI
-	DBG_PRINTLN("Attempting Mitsubishi decode");
-	if (decodeMitsubishi(results))  return true ;
-#endif
-
-#ifdef DECODE_RC5
-	DBG_PRINTLN("Attempting RC5 decode");
-	if (decodeRC5(results))  return true ;
-#endif
-
-#ifdef DECODE_RC6
-	DBG_PRINTLN("Attempting RC6 decode");
-	if (decodeRC6(results))  return true ;
-#endif
-
-#ifdef DECODE_PANASONIC
-	DBG_PRINTLN("Attempting Panasonic decode");
-	if (decodePanasonic(results))  return true ;
-#endif
-
-#ifdef DECODE_LG
-	DBG_PRINTLN("Attempting LG decode");
-	if (decodeLG(results))  return true ;
-#endif
-
-#ifdef DECODE_JVC
-	DBG_PRINTLN("Attempting JVC decode");
-	if (decodeJVC(results))  return true ;
-#endif
-
-#ifdef DECODE_SAMSUNG
-	DBG_PRINTLN("Attempting SAMSUNG decode");
-	if (decodeSAMSUNG(results))  return true ;
-#endif
-
-#ifdef DECODE_WHYNTER
-	DBG_PRINTLN("Attempting Whynter decode");
-	if (decodeWhynter(results))  return true ;
-#endif
-
-#ifdef AIWA_RC_T501
-	DBG_PRINTLN("Attempting Aiwa RC-T501 decode");
-	if (decodeAiwaRCT501(results))  return true ;
-#endif
-
-	// decodeHash returns a hash on any input.
-	// Thus, it needs to be last in the list.
-	// If you add any decodes, add them before this.
-	if (decodeHash(results))  return true ;
-	// Throw away and start over
-	resume();
-	return false;
-}
-
-//+=============================================================================
-// hashdecode - decode an arbitrary IR code.
-// Instead of decoding using a standard encoding scheme
-// (e.g. Sony, NEC, RC5), the code is hashed to a 32-bit value.
-//
-// The algorithm: look at the sequence of MARK signals, and see if each one
-// is shorter (0), the same length (1), or longer (2) than the previous.
-// Do the same with the SPACE signals.  Hszh the resulting sequence of 0's,
-// 1's, and 2's to a 32-bit value.  This will give a unique value for each
-// different code (probably), for most code systems.
-//
-// http://arcfn.com/2010/01/using-arbitrary-remotes-with-arduino.html
-//
-// Compare two tick values, returning 0 if newval is shorter,
-// 1 if newval is equal, and 2 if newval is longer
-// Use a tolerance of 20%
-//
-int  IRrecv::compare (unsigned int oldval,  unsigned int newval)
-{
-  if      (newval < oldval * .8)  return 0 ;
-  else if (oldval < newval * .8)  return 2 ;
-  else                            return 1 ;
-}
-
-//+=============================================================================
-// Use FNV hash algorithm: http://isthe.com/chongo/tech/comp/fnv/#FNV-param
-// Converts the raw code values into a 32-bit hash code.
-// Hopefully this code is unique for each button.
-// This isn't a "real" decoding, just an arbitrary value.
-//
-#define FNV_PRIME_32 16777619
-#define FNV_BASIS_32 2166136261
-
-long  IRrecv::decodeHash (decode_results *results)
-{
-  // Require at least 6 samples to prevent triggering on noise
-  if (results->rawlen < 6)  return false ;
-  long hash = FNV_BASIS_32;
-  for (int i = 1;  (i + 2) < results->rawlen;  i++) {
-    int value =  compare(results->rawbuf[i], results->rawbuf[i+2]);
-    // Add value into the hash
-    hash = (hash * FNV_PRIME_32) ^ value;
-  }
-
-  results->value       = hash;
-  results->bits        = 32;
-  results->decode_type = UNKNOWN;
-
-  return true;
-}

irSend.cpp

@@ -1,66 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//+=============================================================================
-void  IRsend::sendRaw (unsigned int buf[],  int len,  int hz)
-{
-	// Set IR carrier frequency
-	enableIROut(hz);
-
-	for (int i = 0;  i < len;  i++) {
-		if (i & 1)  space(buf[i]) ;
-		else        mark (buf[i]) ;
-	}
-
-	space(0);  // Always end with the LED off
-}
-
-//+=============================================================================
-// Sends an IR mark for the specified number of microseconds.
-// The mark output is modulated at the PWM frequency.
-//
-void  IRsend::mark (int time)
-{
-	TIMER_ENABLE_PWM; // Enable pin 3 PWM output
-	if (time > 0) delayMicroseconds(time);
-}
-
-//+=============================================================================
-// Leave pin off for time (given in microseconds)
-// Sends an IR space for the specified number of microseconds.
-// A space is no output, so the PWM output is disabled.
-//
-void  IRsend::space (int time)
-{
-	TIMER_DISABLE_PWM; // Disable pin 3 PWM output
-	if (time > 0) delayMicroseconds(time);
-}
-
-//+=============================================================================
-// Enables IR output.  The khz value controls the modulation frequency in kilohertz.
-// The IR output will be on pin 3 (OC2B).
-// This routine is designed for 36-40KHz; if you use it for other values, it's up to you
-// to make sure it gives reasonable results.  (Watch out for overflow / underflow / rounding.)
-// TIMER2 is used in phase-correct PWM mode, with OCR2A controlling the frequency and OCR2B
-// controlling the duty cycle.
-// There is no prescaling, so the output frequency is 16MHz / (2 * OCR2A)
-// To turn the output on and off, we leave the PWM running, but connect and disconnect the output pin.
-// A few hours staring at the ATmega documentation and this will all make sense.
-// See my Secrets of Arduino PWM at http://arcfn.com/2009/07/secrets-of-arduino-pwm.html for details.
-//
-void  IRsend::enableIROut (int khz)
-{
-	// Disable the Timer2 Interrupt (which is used for receiving IR)
-	TIMER_DISABLE_INTR; //Timer2 Overflow Interrupt
-
-	pinMode(TIMER_PWM_PIN, OUTPUT);
-	digitalWrite(TIMER_PWM_PIN, LOW); // When not sending PWM, we want it low
-
-	// COM2A = 00: disconnect OC2A
-	// COM2B = 00: disconnect OC2B; to send signal set to 10: OC2B non-inverted
-	// WGM2 = 101: phase-correct PWM with OCRA as top
-	// CS2 = 000: no prescaling
-	// The top value for the timer.  The modulation frequency will be SYSCLOCK / 2 / OCR2A.
-	TIMER_CONFIG_KHZ(khz);
-}
-

ir_Aiwa.cpp

@@ -1,108 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//==============================================================================
-//                         AAA   IIIII  W   W   AAA
-//                        A   A    I    W   W  A   A
-//                        AAAAA    I    W W W  AAAAA
-//                        A   A    I    W W W  A   A
-//                        A   A  IIIII   WWW   A   A
-//==============================================================================
-
-// Baszed off the RC-T501 RCU
-// Lirc file http://lirc.sourceforge.net/remotes/aiwa/RC-T501
-
-#define AIWA_RC_T501_HZ            38
-#define AIWA_RC_T501_BITS          15
-#define AIWA_RC_T501_PRE_BITS      26
-#define AIWA_RC_T501_POST_BITS      1
-#define AIWA_RC_T501_SUM_BITS    (AIWA_RC_T501_PRE_BITS + AIWA_RC_T501_BITS + AIWA_RC_T501_POST_BITS)
-#define AIWA_RC_T501_HDR_MARK    8800
-#define AIWA_RC_T501_HDR_SPACE   4500
-#define AIWA_RC_T501_BIT_MARK     500
-#define AIWA_RC_T501_ONE_SPACE    600
-#define AIWA_RC_T501_ZERO_SPACE  1700
-
-//+=============================================================================
-#ifdef SEND_AIWA_RC_T501
-void  IRsend::sendAiwaRCT501 (int code)
-{
-	unsigned long  pre = 0x0227EEC0;  // 26-bits
-	int            mask;
-
-	// Set IR carrier frequency
-	enableIROut(AIWA_RC_T501_HZ);
-
-	// Header
-	mark(AIWA_RC_T501_HDR_MARK);
-	space(AIWA_RC_T501_HDR_SPACE);
-
-	// Send "pre" data
-	for (unsigned long  mask = 1 << (26 - 1);  mask;  mask >>= 1) {
-		mark(AIWA_RC_T501_BIT_MARK);
-		if (pre & mask)  space(AIWA_RC_T501_ONE_SPACE) ;
-		else             space(AIWA_RC_T501_ZERO_SPACE) ;
-	}
-
-//-v- THIS CODE LOOKS LIKE IT MIGHT BE WRONG - CHECK!
-//    it only send 15bits and ignores the top bit
-//    then uses TOPBIT which is bit-31 to check the bit code
-//    I suspect TOPBIT should be changed to 0x00008000
-	// Skip firts code bit
-	code <<= 1;
-	// Send code
-	for (int  i = 0;  i < 15;  i++) {
-		mark(AIWA_RC_T501_BIT_MARK);
-		if (code & TOPBIT)  space(AIWA_RC_T501_ONE_SPACE) ;
-		else                space(AIWA_RC_T501_ZERO_SPACE) ;
-		code <<= 1;
-	}
-//-^- THIS CODE LOOKS LIKE IT MIGHT BE WRONG - CHECK!
-
-	// POST-DATA, 1 bit, 0x0
-	mark(AIWA_RC_T501_BIT_MARK);
-	space(AIWA_RC_T501_ZERO_SPACE);
-
-	mark(AIWA_RC_T501_BIT_MARK);
-	space(0);
-}
-#endif
-
-//+=============================================================================
-#ifdef DECODE_AIWA_RC_T501
-long  IRrecv::decodeAiwaRCT501 (decode_results *results)
-{
-  int  data   = 0;
-  int  offset = 1; // skip first garbage read
-
-  // Check SIZE
-  if (irparams.rawlen < 2 * (AIWA_RC_T501_SUM_BITS) + 4)  return false ;
-
-  // Check HDR
-  if (!MATCH_MARK(results->rawbuf[offset], AIWA_RC_T501_HDR_MARK))  return false ;
-  offset++;
-
-  // Check HDR space
-  if (!MATCH_SPACE(results->rawbuf[offset], AIWA_RC_T501_HDR_SPACE))  return false ;
-  offset++;
-
-  offset += 26; // skip pre-data - optional
-  while(offset < irparams.rawlen - 4) {
-    if (MATCH_MARK(results->rawbuf[offset], AIWA_RC_T501_BIT_MARK))  offset++ ;
-    else                                                             return false ;
-
-    // ONE & ZERO
-    if      (MATCH_SPACE(results->rawbuf[offset], AIWA_RC_T501_ONE_SPACE))   data = (data << 1) | 1 ;
-    else if (MATCH_SPACE(results->rawbuf[offset], AIWA_RC_T501_ZERO_SPACE))  data <<= 1 ;
-    else                                                                     break ;  // End of one & zero detected
-    offset++;
-  }
-
-  results->bits = (offset - 1) / 2;
-  if (results->bits < 42)  return false ;
-  results->value       = data;
-  results->decode_type = AIWA_RC_T501;
-  return true;
-}
-#endif
-

ir_Dish.cpp

@@ -1,55 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//==============================================================================
-//                       DDDD   IIIII   SSSS  H   H
-//                        D  D    I    S      H   H
-//                        D  D    I     SSS   HHHHH
-//                        D  D    I        S  H   H
-//                       DDDD   IIIII  SSSS   H   H
-//==============================================================================
-
-// Sharp and DISH support by Todd Treece ( http://unionbridge.org/design/ircommand )
-//
-// The sned function needs to be repeated 4 times
-//
-// Only send the last for characters of the hex.
-// I.E.  Use 0x1C10 instead of 0x0000000000001C10 as listed in the LIRC file.
-//
-// Here is the LIRC file I found that seems to match the remote codes from the
-// oscilloscope:
-//   DISH NETWORK (echostar 301):
-//   http://lirc.sourceforge.net/remotes/echostar/301_501_3100_5100_58xx_59xx
-
-#define DISH_BITS 16
-
-#define DISH_HDR_MARK 400
-#define DISH_HDR_SPACE 6100
-#define DISH_BIT_MARK 400
-#define DISH_ONE_SPACE 1700
-#define DISH_ZERO_SPACE 2800
-#define DISH_RPT_SPACE 6200
-#define DISH_TOP_BIT 0x8000
-
-//+=============================================================================
-#ifdef SEND_DISH
-void  IRsend::sendDISH (unsigned long data,  int nbits)
-{
-  // Set IR carrier frequency
-  enableIROut(56);
-
-  mark(DISH_HDR_MARK);
-  space(DISH_HDR_SPACE);
-
-  for (unsigned long  mask = 1 << (nbits - 1);  mask;  mask >>= 1) {
-    if (data & mask) {
-      mark(DISH_BIT_MARK);
-      space(DISH_ONE_SPACE);
-    } else {
-      mark(DISH_BIT_MARK);
-      space(DISH_ZERO_SPACE);
-    }
-  }
-}
-#endif
-

ir_JVC.cpp

@@ -1,97 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//==============================================================================
-//                             JJJJJ  V   V   CCCC
-//                               J    V   V  C
-//                               J     V V   C
-//                             J J     V V   C
-//                              J       V     CCCC
-//==============================================================================
-
-#define JVC_BITS           16
-#define JVC_HDR_MARK     8000
-#define JVC_HDR_SPACE    4000
-#define JVC_BIT_MARK      600
-#define JVC_ONE_SPACE    1600
-#define JVC_ZERO_SPACE    550
-#define JVC_RPT_LENGTH  60000
-
-//+=============================================================================
-#ifdef SEND_JVC
-void  IRsend::sendJVC (unsigned long data,  int nbits, int repeat)
-{
-	// Set IR carrier frequency
-	enableIROut(38);
-
-	// Only send the Header if this is NOT a repeat command
-	if (!repeat){
-		mark(JVC_HDR_MARK);
-		space(JVC_HDR_SPACE);
-	}
-
-	// Data
-	for (unsigned long  mask = 1 << (nbits - 1);  mask;  mask >>= 1) {
-		if (data & mask) {
-			mark(JVC_BIT_MARK);
-			space(JVC_ONE_SPACE);
-		} else {
-			mark(JVC_BIT_MARK);
-			space(JVC_ZERO_SPACE);
-		}
-	}
-
-	// Footer
-    mark(JVC_BIT_MARK);
-    space(0);  // Always end with the LED off
-}
-#endif
-
-//+=============================================================================
-#ifdef DECODE_JVC
-long  IRrecv::decodeJVC (decode_results *results)
-{
-	long  data   = 0;
-	int   offset = 1; // Skip first space
-
-	// Check for repeat
-	if (irparams.rawlen - 1 == 33 &&
-		MATCH_MARK(results->rawbuf[offset], JVC_BIT_MARK) &&
-		MATCH_MARK(results->rawbuf[irparams.rawlen-1], JVC_BIT_MARK)) {
-		results->bits = 0;
-		results->value = REPEAT;
-		results->decode_type = JVC;
-		return true;
-	}
-
-	// Initial mark
-	if (!MATCH_MARK(results->rawbuf[offset], JVC_HDR_MARK))  return false ;
-	offset++;
-
-	if (irparams.rawlen < 2 * JVC_BITS + 1 )  return false ;
-
-	// Initial space
-	if (!MATCH_SPACE(results->rawbuf[offset], JVC_HDR_SPACE))  return false ;
-	offset++;
-
-	for (int i = 0;  i < JVC_BITS;  i++) {
-		if (!MATCH_MARK(results->rawbuf[offset], JVC_BIT_MARK))  return false ;
-		offset++;
-		if      (MATCH_SPACE(results->rawbuf[offset], JVC_ONE_SPACE))   data = (data << 1) | 1 ;
-		else if (MATCH_SPACE(results->rawbuf[offset], JVC_ZERO_SPACE))  data <<= 1 ;
-		else                                                            return false ;
-		offset++;
-	}
-
-	// Stop bit
-	if (!MATCH_MARK(results->rawbuf[offset], JVC_BIT_MARK))  return false ;
-
-	// Success
-	results->bits        = JVC_BITS;
-	results->value       = data;
-	results->decode_type = JVC;
-
-	return true;
-}
-#endif
-

ir_LG.cpp

@@ -1,54 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//==============================================================================
-//                               L       GGGG
-//                               L      G
-//                               L      G  GG
-//                               L      G   G
-//                               LLLLL   GGG
-//==============================================================================
-
-#define LG_BITS 28
-
-#define LG_HDR_MARK 8000
-#define LG_HDR_SPACE 4000
-#define LG_BIT_MARK 600
-#define LG_ONE_SPACE 1600
-#define LG_ZERO_SPACE 550
-#define LG_RPT_LENGTH 60000
-
-//+=============================================================================
-#ifdef DECODE_LG
-long  IRrecv::decodeLG (decode_results *results)
-{
-    long  data   = 0;
-    int   offset = 1; // Skip first space
-
-    // Initial mark
-    if (!MATCH_MARK(results->rawbuf[offset], LG_HDR_MARK))  return false ;
-    offset++;
-    if (irparams.rawlen < 2 * LG_BITS + 1 )  return false ;
-    // Initial space
-    if (!MATCH_SPACE(results->rawbuf[offset], LG_HDR_SPACE))  return false ;
-    offset++;
-    for (int i = 0;  i < LG_BITS;  i++) {
-        if (!MATCH_MARK(results->rawbuf[offset], LG_BIT_MARK))  return false ;
-        offset++;
-        if      (MATCH_SPACE(results->rawbuf[offset], LG_ONE_SPACE))   data = (data << 1) | 1 ;
-        else if (MATCH_SPACE(results->rawbuf[offset], LG_ZERO_SPACE))  data <<= 1 ;
-        else                                                           return false ;
-        offset++;
-    }
-
-    // Stop bit
-    if (!MATCH_MARK(results->rawbuf[offset], LG_BIT_MARK))   return false ;
-
-    // Success
-    results->bits = LG_BITS;
-    results->value = data;
-    results->decode_type = LG;
-    return true;
-}
-#endif
-

ir_Mitsubishi.cpp

@@ -1,85 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//==============================================================================
-//    MMMMM  IIIII TTTTT   SSSS  U   U  BBBB   IIIII   SSSS  H   H  IIIII
-//    M M M    I     T    S      U   U  B   B    I    S      H   H    I
-//    M M M    I     T     SSS   U   U  BBBB     I     SSS   HHHHH    I
-//    M   M    I     T        S  U   U  B   B    I        S  H   H    I
-//    M   M  IIIII   T    SSSS    UUU   BBBBB  IIIII  SSSS   H   H  IIIII
-//==============================================================================
-
-// Looks like Sony except for timings, 48 chars of data and time/space different
-
-#define MITSUBISHI_BITS 16
-
-// Mitsubishi RM 75501
-// 14200 7 41 7 42 7 42 7 17 7 17 7 18 7 41 7 18 7 17 7 17 7 18 7 41 8 17 7 17 7 18 7 17 7
-// #define MITSUBISHI_HDR_MARK	250  // seen range 3500
-#define MITSUBISHI_HDR_SPACE	350 //  7*50+100
-#define MITSUBISHI_ONE_MARK	1950 // 41*50-100
-#define MITSUBISHI_ZERO_MARK  750 // 17*50-100
-// #define MITSUBISHI_DOUBLE_SPACE_USECS  800  // usually ssee 713 - not using ticks as get number wrapround
-// #define MITSUBISHI_RPT_LENGTH 45000
-
-//+=============================================================================
-#ifdef DECODE_MITSUBISHI
-long  IRrecv::decodeMitsubishi (decode_results *results)
-{
-  // Serial.print("?!? decoding Mitsubishi:");Serial.print(irparams.rawlen); Serial.print(" want "); Serial.println( 2 * MITSUBISHI_BITS + 2);
-  long data = 0;
-  if (irparams.rawlen < 2 * MITSUBISHI_BITS + 2)  return false ;
-  int offset = 0; // Skip first space
-  // Initial space
-
-#if 0
-  // Put this back in for debugging - note can't use #DEBUG as if Debug on we don't see the repeat cos of the delay
-  Serial.print("IR Gap: ");
-  Serial.println( results->rawbuf[offset]);
-  Serial.println( "test against:");
-  Serial.println(results->rawbuf[offset]);
-#endif
-
-#if 0
-  // Not seeing double keys from Mitsubishi
-  if (results->rawbuf[offset] < MITSUBISHI_DOUBLE_SPACE_USECS) {
-    // Serial.print("IR Gap found: ");
-    results->bits = 0;
-    results->value = REPEAT;
-    results->decode_type = MITSUBISHI;
-    return true;
-  }
-#endif
-
-  offset++;
-
-  // Typical
-  // 14200 7 41 7 42 7 42 7 17 7 17 7 18 7 41 7 18 7 17 7 17 7 18 7 41 8 17 7 17 7 18 7 17 7
-
-  // Initial Space
-  if (!MATCH_MARK(results->rawbuf[offset], MITSUBISHI_HDR_SPACE))  return false ;
-  offset++;
-
-  while (offset + 1 < irparams.rawlen) {
-    if      (MATCH_MARK(results->rawbuf[offset], MITSUBISHI_ONE_MARK))   data = (data << 1) | 1 ;
-    else if (MATCH_MARK(results->rawbuf[offset], MITSUBISHI_ZERO_MARK))  data <<= 1 ;
-    else                                                                 return false ;
-    offset++;
-
-    if (!MATCH_SPACE(results->rawbuf[offset], MITSUBISHI_HDR_SPACE))  break ;
-    offset++;
-  }
-
-  // Success
-  results->bits = (offset - 1) / 2;
-  if (results->bits < MITSUBISHI_BITS) {
-    results->bits = 0;
-    return false;
-  }
-
-  results->value       = data;
-  results->decode_type = MITSUBISHI;
-  return true;
-}
-#endif
-

ir_NEC.cpp

@@ -1,98 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//==============================================================================
-//                           N   N  EEEEE   CCCC
-//                           NN  N  E      C
-//                           N N N  EEE    C
-//                           N  NN  E      C
-//                           N   N  EEEEE   CCCC
-//==============================================================================
-
-#define NEC_BITS          32
-#define NEC_HDR_MARK    9000
-#define NEC_HDR_SPACE   4500
-#define NEC_BIT_MARK     560
-#define NEC_ONE_SPACE   1690
-#define NEC_ZERO_SPACE   560
-#define NEC_RPT_SPACE   2250
-
-//+=============================================================================
-#ifdef SEND_NEC
-void  IRsend::sendNEC (unsigned long data,  int nbits)
-{
-	// Set IR carrier frequency
-	enableIROut(38);
-
-	// Header
-	mark(NEC_HDR_MARK);
-	space(NEC_HDR_SPACE);
-
-	// Data
-	for (unsigned long  mask = 1 << (nbits - 1);  mask;  mask >>= 1) {
-		if (data & mask) {
-			mark(NEC_BIT_MARK);
-			space(NEC_ONE_SPACE);
-		} else {
-			mark(NEC_BIT_MARK);
-			space(NEC_ZERO_SPACE);
-		}
-	}
-
-	// Footer
-	mark(NEC_BIT_MARK);
-	space(0);  // Always end with the LED off
-}
-#endif
-
-//+=============================================================================
-// NECs have a repeat only 4 items long
-//
-#ifdef DECODE_NEC
-long  IRrecv::decodeNEC (decode_results *results)
-{
-	long  data   = 0;  // We decode in to here; Start with nothing
-	int   offset = 1;  // Index in to results; Skip first entry!?
-
-	// Check header "mark"
-	if (!MATCH_MARK(results->rawbuf[offset], NEC_HDR_MARK))  return false ;
-	offset++;
-
-	// Check for repeat
-	if ( (irparams.rawlen == 4)
-	    && MATCH_SPACE(results->rawbuf[offset  ], NEC_RPT_SPACE)
-	    && MATCH_MARK (results->rawbuf[offset+1], NEC_BIT_MARK )
-	   ) {
-		results->bits        = 0;
-		results->value       = REPEAT;
-		results->decode_type = NEC;
-		return true;
-	}
-
-	// Check we have enough data
-	if (irparams.rawlen < (2 * NEC_BITS) + 4)  return false ;
-
-	// Check header "space"
-	if (!MATCH_SPACE(results->rawbuf[offset], NEC_HDR_SPACE))  return false ;
-	offset++;
-
-	// Build the data
-	for (int i = 0;  i < NEC_BITS;  i++) {
-		// Check data "mark"
-		if (!MATCH_MARK(results->rawbuf[offset], NEC_BIT_MARK))  return false ;
-		offset++;
-        // Suppend this bit
-		if      (MATCH_SPACE(results->rawbuf[offset], NEC_ONE_SPACE ))  data = (data << 1) | 1 ;
-		else if (MATCH_SPACE(results->rawbuf[offset], NEC_ZERO_SPACE))  data = (data << 1) | 0 ;
-		else                                                            return false ;
-		offset++;
-	}
-
-	// Success
-	results->bits        = NEC_BITS;
-	results->value       = data;
-	results->decode_type = NEC;
-
-	return true;
-}
-#endif

ir_Panasonic.cpp

@@ -1,80 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//==============================================================================
-//       PPPP    AAA   N   N   AAA    SSSS   OOO   N   N  IIIII   CCCC
-//       P   P  A   A  NN  N  A   A  S      O   O  NN  N    I    C
-//       PPPP   AAAAA  N N N  AAAAA   SSS   O   O  N N N    I    C
-//       P      A   A  N  NN  A   A      S  O   O  N  NN    I    C
-//       P      A   A  N   N  A   A  SSSS    OOO   N   N  IIIII   CCCC
-//==============================================================================
-
-#define PANASONIC_BITS         48
-#define PANASONIC_HDR_MARK   3502
-#define PANASONIC_HDR_SPACE  1750
-#define PANASONIC_BIT_MARK    502
-#define PANASONIC_ONE_SPACE  1244
-#define PANASONIC_ZERO_SPACE  400
-
-//+=============================================================================
-#ifdef SEND_PANASONIC
-void  IRsend::sendPanasonic (unsigned int address,  unsigned long data)
-{
-	// Set IR carrier frequency
-	enableIROut(35);
-
-	// Header
-	mark(PANASONIC_HDR_MARK);
-	space(PANASONIC_HDR_SPACE);
-
-	// Address
-	for (unsigned long  mask = 1 << (16 - 1);  mask;  mask >>= 1) {
-		mark(PANASONIC_BIT_MARK);
-		if (address & mask)  space(PANASONIC_ONE_SPACE) ;
-		else                 space(PANASONIC_ZERO_SPACE) ;
-    }
-
-	// Data
-	for (unsigned long  mask = 1 << (32 - 1);  mask;  mask >>= 1) {
-        mark(PANASONIC_BIT_MARK);
-        if (data & mask)  space(PANASONIC_ONE_SPACE) ;
-        else              space(PANASONIC_ZERO_SPACE) ;
-    }
-
-	// Footer
-    mark(PANASONIC_BIT_MARK);
-    space(0);  // Always end with the LED off
-}
-#endif
-
-//+=============================================================================
-#ifdef DECODE_PANASONIC
-long  IRrecv::decodePanasonic (decode_results *results)
-{
-    unsigned long long data = 0;
-    int offset = 1;
-
-    if (!MATCH_MARK(results->rawbuf[offset], PANASONIC_HDR_MARK))  return false ;
-    offset++;
-    if (!MATCH_MARK(results->rawbuf[offset], PANASONIC_HDR_SPACE))  return false ;
-    offset++;
-
-    // decode address
-    for (int i = 0;  i < PANASONIC_BITS;  i++) {
-        if (!MATCH_MARK(results->rawbuf[offset++], PANASONIC_BIT_MARK))  return false ;
-
-        if      (MATCH_SPACE(results->rawbuf[offset],PANASONIC_ONE_SPACE ))  data = (data << 1) | 1 ;
-        else if (MATCH_SPACE(results->rawbuf[offset],PANASONIC_ZERO_SPACE))  data = (data << 1) | 0 ;
-        else                                                                 return false ;
-        offset++;
-    }
-
-    results->value            = (unsigned long)data;
-    results->panasonicAddress = (unsigned int)(data >> 32);
-    results->decode_type      = PANASONIC;
-    results->bits             = PANASONIC_BITS;
-
-    return true;
-}
-#endif
-

ir_RC5_RC6.cpp

@@ -1,196 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//+=============================================================================
-// Gets one undecoded level at a time from the raw buffer.
-// The RC5/6 decoding is easier if the data is broken into time intervals.
-// E.g. if the buffer has MARK for 2 time intervals and SPACE for 1,
-// successive calls to getRClevel will return MARK, MARK, SPACE.
-// offset and used are updated to keep track of the current position.
-// t1 is the time interval for a single bit in microseconds.
-// Returns -1 for error (measured time interval is not a multiple of t1).
-//
-int  IRrecv::getRClevel (decode_results *results,  int *offset,  int *used,  int t1)
-{
-  if (*offset >= results->rawlen)  return SPACE ;  // After end of recorded buffer, assume SPACE.
-  int width = results->rawbuf[*offset];
-  int val = ((*offset) % 2) ? MARK : SPACE;
-  int correction = (val == MARK) ? MARK_EXCESS : - MARK_EXCESS;
-
-  int avail;
-  if      (MATCH(width,   t1 + correction))  avail = 1 ;
-  else if (MATCH(width, 2*t1 + correction))  avail = 2 ;
-  else if (MATCH(width, 3*t1 + correction))  avail = 3 ;
-  else                                       return -1 ;
-
-  (*used)++;
-  if (*used >= avail) {
-    *used = 0;
-    (*offset)++;
-  }
-
-  DBG_PRINTLN( (val == MARK) ? "MARK" : "SPACE" );
-  return val;
-}
-
-//==============================================================================
-// RRRR    CCCC  55555
-// R   R  C      5
-// RRRR   C      5555
-// R  R   C          5
-// R   R   CCCC  5555
-//
-// NB: First bit must be a one (start bit)
-//
-#define MIN_RC5_SAMPLES    11
-#define RC5_T1            889
-#define RC5_RPT_LENGTH  46000
-
-//+=============================================================================
-#ifdef SEND_RC5
-void  IRsend::sendRC5 (unsigned long data,  int nbits)
-{
-	// Set IR carrier frequency
-	enableIROut(36);
-
-	// Start
-	mark(RC5_T1);
-	space(RC5_T1);
-	mark(RC5_T1);
-
-	// Data
-	for (unsigned long  mask = 1 << (nbits - 1);  mask;  mask >>= 1) {
-		if (data & mask) {
-			space(RC5_T1); // 1 is space, then mark
-			mark(RC5_T1);
-		} else {
-			mark(RC5_T1);
-			space(RC5_T1);
-		}
-	}
-
-	space(0);  // Always end with the LED off
-}
-#endif
-
-//+=============================================================================
-#ifdef DECODE_RC5
-long  IRrecv::decodeRC5 (decode_results *results)
-{
-	if (irparams.rawlen < MIN_RC5_SAMPLES + 2)  return false ;
-	int offset = 1; // Skip gap space
-	long data = 0;
-	int used = 0;
-	// Get start bits
-	if (getRClevel(results, &offset, &used, RC5_T1) != MARK)   return false ;
-	if (getRClevel(results, &offset, &used, RC5_T1) != SPACE)  return false ;
-	if (getRClevel(results, &offset, &used, RC5_T1) != MARK)   return false ;
-	int nbits;
-	for (nbits = 0;  offset < irparams.rawlen;  nbits++) {
-		int levelA = getRClevel(results, &offset, &used, RC5_T1);
-		int levelB = getRClevel(results, &offset, &used, RC5_T1);
-
-		if      (levelA == SPACE && levelB == MARK)  data = (data << 1) | 1 ;  // 1 bit
-		else if (levelA == MARK && levelB == SPACE)  data <<= 1 ;              // zero bit
-		else                                         return false ;
-	}
-
-	// Success
-	results->bits        = nbits;
-	results->value       = data;
-	results->decode_type = RC5;
-	return true;
-}
-#endif
-
-//+=============================================================================
-// RRRR    CCCC   6666
-// R   R  C      6
-// RRRR   C      6666
-// R  R   C      6   6
-// R   R   CCCC   666
-//
-// NB : Caller needs to take care of flipping the toggle bit
-//
-#define MIN_RC6_SAMPLES     1
-#define RC6_HDR_MARK     2666
-#define RC6_HDR_SPACE     889
-#define RC6_T1            444
-#define RC6_RPT_LENGTH  46000
-
-#ifdef SEND_RC6
-void  IRsend::sendRC6 (unsigned long data,  int nbits)
-{
-	// Set IR carrier frequency
-	enableIROut(36);
-
-	// Header
-	mark(RC6_HDR_MARK);
-	space(RC6_HDR_SPACE);
-
-	// Start bit
-	mark(RC6_T1);
-	space(RC6_T1);
-
-	// Data
-	for (unsigned long  i = 1, mask = 1 << (nbits - 1);  mask;  i++, mask >>= 1) {
-		// The fourth bit we send is a "double width trailer bit"
-		int  t = (i == 4) ? (RC6_T1 * 2) : (RC6_T1) ;
-		if (data & mask) {
-			mark(t);
-			space(t);
-		} else {
-			space(t);
-			mark(t);
-		}
-	}
-
-	space(0);  // Always end with the LED off
-}
-#endif
-
-//+=============================================================================
-#ifdef DECODE_RC6
-long  IRrecv::decodeRC6 (decode_results *results)
-{
-	if (results->rawlen < MIN_RC6_SAMPLES)  return false ;
-	int offset = 1; // Skip first space
-
-	// Initial mark
-	if (!MATCH_MARK(results->rawbuf[offset], RC6_HDR_MARK))  return false ;
-	offset++;
-
-	if (!MATCH_SPACE(results->rawbuf[offset], RC6_HDR_SPACE))  return false ;
-	offset++;
-
-	long  data = 0;
-	int   used = 0;
-
-	// Get start bit (1)
-	if (getRClevel(results, &offset, &used, RC6_T1) != MARK)   return false ;
-	if (getRClevel(results, &offset, &used, RC6_T1) != SPACE)  return false ;
-	int nbits;
-	for (nbits = 0;  offset < results->rawlen;  nbits++) {
-		int levelA, levelB; // Next two levels
-		levelA = getRClevel(results, &offset, &used, RC6_T1);
-		if (nbits == 3) {
-			// T bit is double wide; make sure second half matches
-			if (levelA != getRClevel(results, &offset, &used, RC6_T1)) return false;
-		}
-		levelB = getRClevel(results, &offset, &used, RC6_T1);
-		if (nbits == 3) {
-			// T bit is double wide; make sure second half matches
-			if (levelB != getRClevel(results, &offset, &used, RC6_T1)) return false;
-		}
-		if      (levelA == MARK && levelB == SPACE)  data = (data << 1) | 1 ; // 1-bit (reversed compared to RC5)
-		else if (levelA == SPACE && levelB == MARK)  data <<= 1 ;             // zero bit
-		else                                         return false ;             // Error
-	}
-
-	// Success
-	results->bits = nbits;
-	results->value = data;
-	results->decode_type = RC6;
-	return true;
-}
-#endif

ir_Samsung.cpp

@@ -1,94 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//==============================================================================
-//              SSSS   AAA    MMM    SSSS  U   U  N   N   GGGG
-//             S      A   A  M M M  S      U   U  NN  N  G
-//              SSS   AAAAA  M M M   SSS   U   U  N N N  G  GG
-//                 S  A   A  M   M      S  U   U  N  NN  G   G
-//             SSSS   A   A  M   M  SSSS    UUU   N   N   GGG
-//==============================================================================
-
-#define SAMSUNG_BITS          32
-#define SAMSUNG_HDR_MARK    5000
-#define SAMSUNG_HDR_SPACE   5000
-#define SAMSUNG_BIT_MARK     560
-#define SAMSUNG_ONE_SPACE   1600
-#define SAMSUNG_ZERO_SPACE   560
-#define SAMSUNG_RPT_SPACE   2250
-
-//+=============================================================================
-#ifdef SEND_SAMSUNG
-void  IRsend::sendSAMSUNG (unsigned long data,  int nbits)
-{
-	// Set IR carrier frequency
-	enableIROut(38);
-
-	// Header
-	mark(SAMSUNG_HDR_MARK);
-	space(SAMSUNG_HDR_SPACE);
-
-	// Data
-	for (unsigned long  mask = 1 << (nbits - 1);  mask;  mask >>= 1) {
-		if (data & mask) {
-			mark(SAMSUNG_BIT_MARK);
-			space(SAMSUNG_ONE_SPACE);
-		} else {
-			mark(SAMSUNG_BIT_MARK);
-			space(SAMSUNG_ZERO_SPACE);
-		}
-	}
-
-	// Footer
-	mark(SAMSUNG_BIT_MARK);
-    space(0);  // Always end with the LED off
-}
-#endif
-
-//+=============================================================================
-// SAMSUNGs have a repeat only 4 items long
-//
-#ifdef DECODE_SAMSUNG
-long  IRrecv::decodeSAMSUNG (decode_results *results)
-{
-	long  data   = 0;
-	int   offset = 1; // Skip first space
-
-	// Initial mark
-	if (!MATCH_MARK(results->rawbuf[offset], SAMSUNG_HDR_MARK))   return false ;
-	offset++;
-
-	// Check for repeat
-	if (irparams.rawlen == 4 &&
-		MATCH_SPACE(results->rawbuf[offset], SAMSUNG_RPT_SPACE) &&
-		MATCH_MARK(results->rawbuf[offset+1], SAMSUNG_BIT_MARK)) {
-		results->bits = 0;
-		results->value = REPEAT;
-		results->decode_type = SAMSUNG;
-		return true;
-	}
-	if (irparams.rawlen < 2 * SAMSUNG_BITS + 4)  return false ;
-
-	// Initial space
-	if (!MATCH_SPACE(results->rawbuf[offset], SAMSUNG_HDR_SPACE))  return false ;
-	offset++;
-
-	for (int i = 0;  i < SAMSUNG_BITS;   i++) {
-		if (!MATCH_MARK(results->rawbuf[offset], SAMSUNG_BIT_MARK))  return false ;
-
-		offset++;
-
-		if      (MATCH_SPACE(results->rawbuf[offset], SAMSUNG_ONE_SPACE))   data = (data << 1) | 1 ;
-		else if (MATCH_SPACE(results->rawbuf[offset], SAMSUNG_ZERO_SPACE))  data <<= 1 ;
-		else                                                                return false ;
-		offset++;
-	}
-
-	// Success
-	results->bits        = SAMSUNG_BITS;
-	results->value       = data;
-	results->decode_type = SAMSUNG;
-	return true;
-}
-#endif
-

ir_Sanyo.cpp

@@ -1,79 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//==============================================================================
-//                      SSSS   AAA   N   N  Y   Y   OOO
-//                     S      A   A  NN  N   Y Y   O   O
-//                      SSS   AAAAA  N N N    Y    O   O
-//                         S  A   A  N  NN    Y    O   O
-//                     SSSS   A   A  N   N    Y     OOO
-//==============================================================================
-
-// I think this is a Sanyo decoder:  Serial = SA 8650B
-// Looks like Sony except for timings, 48 chars of data and time/space different
-
-#define SANYO_BITS 12
-
-#define SANYO_HDR_MARK	3500  // seen range 3500
-#define SANYO_HDR_SPACE	950 //  seen 950
-#define SANYO_ONE_MARK	2400 // seen 2400
-#define SANYO_ZERO_MARK 700 //  seen 700
-#define SANYO_DOUBLE_SPACE_USECS  800  // usually ssee 713 - not using ticks as get number wrapround
-#define SANYO_RPT_LENGTH 45000
-
-//+=============================================================================
-#ifdef DECODE_SANYO
-long  IRrecv::decodeSanyo (decode_results *results)
-{
-  long data = 0;
-  if (irparams.rawlen < 2 * SANYO_BITS + 2)  return false ;
-  int offset = 0; // Skip first space
-  // Initial space
-
-#if 0
-  // Put this back in for debugging - note can't use #DEBUG as if Debug on we don't see the repeat cos of the delay
-  Serial.print("IR Gap: ");
-  Serial.println( results->rawbuf[offset]);
-  Serial.println( "test against:");
-  Serial.println(results->rawbuf[offset]);
-#endif
-
-  if (results->rawbuf[offset] < SANYO_DOUBLE_SPACE_USECS) {
-    // Serial.print("IR Gap found: ");
-    results->bits = 0;
-    results->value = REPEAT;
-    results->decode_type = SANYO;
-    return true;
-  }
-  offset++;
-
-  // Initial mark
-  if (!MATCH_MARK(results->rawbuf[offset], SANYO_HDR_MARK))  return false ;
-  offset++;
-
-  // Skip Second Mark
-  if (!MATCH_MARK(results->rawbuf[offset], SANYO_HDR_MARK))  return false ;
-  offset++;
-
-  while (offset + 1 < irparams.rawlen) {
-    if (!MATCH_SPACE(results->rawbuf[offset], SANYO_HDR_SPACE))  break ;
-    offset++;
-    if      (MATCH_MARK(results->rawbuf[offset], SANYO_ONE_MARK))   data = (data << 1) | 1 ;
-    else if (MATCH_MARK(results->rawbuf[offset], SANYO_ZERO_MARK))  data <<= 1 ;
-    else                                                            return false ;
-    offset++;
-  }
-
-  // Success
-  results->bits = (offset - 1) / 2;
-  if (results->bits < 12) {
-    results->bits = 0;
-    return false;
-  }
-
-  results->value       = data;
-  results->decode_type = SANYO;
-  return true;
-}
-#endif
-

ir_Sharp.cpp

@@ -1,71 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//==============================================================================
-//                       SSSS  H   H   AAA   RRRR   PPPP
-//                      S      H   H  A   A  R   R  P   P
-//                       SSS   HHHHH  AAAAA  RRRR   PPPP
-//                          S  H   H  A   A  R  R   P
-//                      SSSS   H   H  A   A  R   R  P
-//==============================================================================
-
-// Sharp and DISH support by Todd Treece ( http://unionbridge.org/design/ircommand )
-//
-// The send function has the necessary repeat built in because of the need to
-// invert the signal.
-//
-// Sharp protocol documentation:
-// http://www.sbprojects.com/knowledge/ir/sharp.htm
-//
-// Here is the LIRC file I found that seems to match the remote codes from the
-// oscilloscope:
-//   Sharp LCD TV:
-//   http://lirc.sourceforge.net/remotes/sharp/GA538WJSA
-
-#define SHARP_BITS 15
-
-#define SHARP_BIT_MARK 245
-#define SHARP_ONE_SPACE 1805
-#define SHARP_ZERO_SPACE 795
-#define SHARP_GAP 600000
-#define SHARP_TOGGLE_MASK 0x3FF
-#define SHARP_RPT_SPACE 3000
-
-//+=============================================================================
-#ifdef SEND_SHARP
-void  IRsend::sendSharpRaw (unsigned long data,  int nbits)
-{
-  unsigned long  invertdata = data ^ SHARP_TOGGLE_MASK;
-  enableIROut(38);
-
-  // Sending codes in bursts of 3 (normal, inverted, normal) makes transmission
-  // much more reliable. That's the exact behaviour of CD-S6470 remote control.
-  for (int n = 0;  n < 3;  n++) {
-	for (unsigned long  mask = 1 << (nbits - 1);  mask;  mask >>= 1) {
-      if (data & mask) {
-        mark(SHARP_BIT_MARK);
-        space(SHARP_ONE_SPACE);
-      } else {
-        mark(SHARP_BIT_MARK);
-        space(SHARP_ZERO_SPACE);
-      }
-    }
-
-    mark(SHARP_BIT_MARK);
-    space(SHARP_ZERO_SPACE);
-    delay(40);
-
-    data = data ^ SHARP_TOGGLE_MASK;
-  }
-}
-
-//+=============================================================================
-// Sharp send compatible with data obtained through decodeSharp()
-//                                                  ^^^^^^^^^^^^^ FUNCTION MISSING!
-//
-void  IRsend::sendSharp (unsigned int address,  unsigned int command)
-{
-  sendSharpRaw((address << 10) | (command << 2) | 2, 15);
-}
-
-#endif

ir_Sony.cpp

@@ -1,90 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//==============================================================================
-//                           SSSS   OOO   N   N  Y   Y
-//                          S      O   O  NN  N   Y Y
-//                           SSS   O   O  N N N    Y
-//                              S  O   O  N  NN    Y
-//                          SSSS    OOO   N   N    Y
-//==============================================================================
-
-#define SONY_BITS                   12
-#define SONY_HDR_MARK             2400
-#define SONY_HDR_SPACE             600
-#define SONY_ONE_MARK             1200
-#define SONY_ZERO_MARK             600
-#define SONY_RPT_LENGTH          45000
-#define SONY_DOUBLE_SPACE_USECS    500  // usually ssee 713 - not using ticks as get number wrapround
-
-//+=============================================================================
-#ifdef SEND_SONY
-void  IRsend::sendSony (unsigned long data,  int nbits)
-{
-	// Set IR carrier frequency
-	enableIROut(40);
-
-	// Header
-	mark(SONY_HDR_MARK);
-	space(SONY_HDR_SPACE);
-
-	// Data
-	for (unsigned long  mask = 1 << (nbits - 1);  mask;  mask >>= 1) {
-		if (data & mask) {
-			mark(SONY_ONE_MARK);
-			space(SONY_HDR_SPACE);
-		} else {
-			mark(SONY_ZERO_MARK);
-			space(SONY_HDR_SPACE);
-    	}
-  	}
-
-	// We will have ended with LED off
-}
-#endif
-
-//+=============================================================================
-#ifdef DECODE_SONY
-long  IRrecv::decodeSony (decode_results *results)
-{
-	long data = 0;
-	if (irparams.rawlen < 2 * SONY_BITS + 2)  return false ;
-	int offset = 0; // Dont skip first space, check its size
-
-	// Some Sony's deliver repeats fast after first
-	// unfortunately can't spot difference from of repeat from two fast clicks
-	if (results->rawbuf[offset] < SONY_DOUBLE_SPACE_USECS) {
-		// Serial.print("IR Gap found: ");
-		results->bits = 0;
-		results->value = REPEAT;
-		results->decode_type = SONY;
-
-	    return true;
-	}
-	offset++;
-
-	// Initial mark
-	if (!MATCH_MARK(results->rawbuf[offset], SONY_HDR_MARK))  return false ;
-	offset++;
-
-	while (offset + 1 < irparams.rawlen) {
-		if (!MATCH_SPACE(results->rawbuf[offset], SONY_HDR_SPACE))  break ;
-		offset++;
-		if      (MATCH_MARK(results->rawbuf[offset], SONY_ONE_MARK))   data = (data << 1) | 1 ;
-		else if (MATCH_MARK(results->rawbuf[offset], SONY_ZERO_MARK))  data <<= 1 ;
-		else                                                           return false ;
-		offset++;
-	}
-
-	// Success
-	results->bits = (offset - 1) / 2;
-	if (results->bits < 12) {
-		results->bits = 0;
-		return false;
-	}
-	results->value       = data;
-	results->decode_type = SONY;
-	return true;
-}
-#endif
-

ir_Whynter.cpp

@@ -1,96 +0,0 @@
-#include "IRremote.h"
-#include "IRremoteInt.h"
-
-//==============================================================================
-//               W   W  H   H  Y   Y N   N TTTTT EEEEE  RRRRR
-//               W   W  H   H   Y Y  NN  N   T   E      R   R
-//               W W W  HHHHH    Y   N N N   T   EEE    RRRR
-//               W W W  H   H    Y   N  NN   T   E      R  R
-//                WWW   H   H    Y   N   N   T   EEEEE  R   R
-//==============================================================================
-
-#define WHYNTER_BITS          32
-#define WHYNTER_HDR_MARK    2850
-#define WHYNTER_HDR_SPACE   2850
-#define WHYNTER_BIT_MARK     750
-#define WHYNTER_ONE_MARK     750
-#define WHYNTER_ONE_SPACE   2150
-#define WHYNTER_ZERO_MARK    750
-#define WHYNTER_ZERO_SPACE   750
-
-//+=============================================================================
-#ifdef SEND_WHYNTER
-void  IRsend::sendWhynter (unsigned long data,  int nbits)
-{
-	// Set IR carrier frequency
-	enableIROut(38);
-
-	// Start
-	mark(WHYNTER_ZERO_MARK);
-	space(WHYNTER_ZERO_SPACE);
-
-	// Header
-	mark(WHYNTER_HDR_MARK);
-	space(WHYNTER_HDR_SPACE);
-
-	// Data
-	for (unsigned long  mask = 1 << (nbits - 1);  mask;  mask >>= 1) {
-		if (data & mask) {
-			mark(WHYNTER_ONE_MARK);
-			space(WHYNTER_ONE_SPACE);
-		} else {
-			mark(WHYNTER_ZERO_MARK);
-			space(WHYNTER_ZERO_SPACE);
-		}
-	}
-
-	// Footer
-	mark(WHYNTER_ZERO_MARK);
-	space(WHYNTER_ZERO_SPACE);  // Always end with the LED off
-}
-#endif
-
-//+=============================================================================
-#ifdef DECODE_WHYNTER
-long  IRrecv::decodeWhynter (decode_results *results)
-{
-	long data = 0;
-
-	if (irparams.rawlen < 2 * WHYNTER_BITS + 6)  return false ;
-
-	int offset = 1; // skip initial space
-
-	// sequence begins with a bit mark and a zero space
-	if (!MATCH_MARK(results->rawbuf[offset], WHYNTER_BIT_MARK))  return false ;
-	offset++;
-	if (!MATCH_SPACE(results->rawbuf[offset], WHYNTER_ZERO_SPACE))  return false ;
-	offset++;
-
-	// header mark and space
-	if (!MATCH_MARK(results->rawbuf[offset], WHYNTER_HDR_MARK))  return false ;
-	offset++;
-	if (!MATCH_SPACE(results->rawbuf[offset], WHYNTER_HDR_SPACE))  return false ;
-	offset++;
-
-	// data bits
-	for (int i = 0;  i < WHYNTER_BITS;  i++) {
-		if (!MATCH_MARK(results->rawbuf[offset], WHYNTER_BIT_MARK))  return false ;
-		offset++;
-
-		if      (MATCH_SPACE(results->rawbuf[offset], WHYNTER_ONE_SPACE))  data = (data << 1) | 1 ;
-		else if (MATCH_SPACE(results->rawbuf[offset],WHYNTER_ZERO_SPACE))  data <<= 1 ;
-		else                                                               return false ;
-		offset++;
-	}
-
-	// trailing mark
-	if (!MATCH_MARK(results->rawbuf[offset], WHYNTER_BIT_MARK))  return false ;
-
-	// Success
-	results->bits = WHYNTER_BITS;
-	results->value = data;
-	results->decode_type = WHYNTER;
-	return true;
-}
-#endif
-

keywords.txt

@@ -48,6 +48,6 @@ SHARP LITERAL1
 PANASONIC LITERAL1
 JVC LITERAL1
 LG LITERAL1
-AIWA_RC_T501 LITERAL1
+SHARP LITERAL1
 UNKNOWN	LITERAL1
 REPEAT	LITERAL1

library.properties

@@ -1,9 +0,0 @@
-name=IRremote
-version=1.0
-author=shirriff
-maintainer=shirriff
-sentence=Send and receive infrared signals with multiple protocols
-paragraph=Send and receive infrared signals with multiple protocols
-category=Signal Input/Output
-url=https://github.com/shirriff/Arduino-IRremote.git
-architectures=*