working on restructuring and renaming. Change IRremote.h to AIRremote.h

If there are other ideas for a better name then we can use that, A =
Arduino in case it wasnt obvious.

AIRremote.h

@@ -15,8 +15,8 @@
 // Whynter A/C ARC-110WD added by Francesco Meschia
 //******************************************************************************
 
-#ifndef IRremote_h
-#define IRremote_h
+#ifndef AIRremote_h
+#define AIRremote_h
 
 //------------------------------------------------------------------------------
 // The ISR header contains several useful macros the user may wish to use

IRremote.cpp

@@ -22,7 +22,7 @@
 
 // Defining IR_GLOBAL here allows us to declare the instantiation of global variables
 #define IR_GLOBAL
-#	include "IRremote.h"
+#	include "AIRremote.h"
 #	include "IRremoteInt.h"
 #undef IR_GLOBAL
 

ISSUE_TEMPLATE.md

@@ -5,7 +5,7 @@
 **Code Block:**
 ```c
 
-#include <IRremote.h> 
+#include <AIRremote.h> 
 
 .....
 

examples/AiwaRCT501SendDemo/AiwaRCT501SendDemo.ino

@@ -6,7 +6,7 @@
  * http://arcfn.com
  */
 
-#include "IRremote.h"
+#include "AIRremote.h"
 
 #define POWER 0x7F80
 #define AIWA_RC_T501

examples/IRrecord/IRrecord.ino

@@ -15,7 +15,7 @@
  * http://arcfn.com
  */
 
-#include <IRremote.h>
+#include <AIRremote.h>
 
 int RECV_PIN = 11;
 int BUTTON_PIN = 12;

examples/IRrecvDemo/IRrecvDemo.ino

@@ -6,7 +6,7 @@
  * http://arcfn.com
  */
 
-#include <IRremote.h>
+#include <AIRremote.h>
 
 int RECV_PIN = 11;
 

examples/IRrecvDump/IRrecvDump.ino

@@ -8,7 +8,7 @@
  * LG added by Darryl Smith (based on the JVC protocol)
  */
 
-#include <IRremote.h>
+#include <AIRremote.h>
 
 /* 
 *  Default is Arduino pin D11. 

examples/IRrecvDumpV2/IRrecvDumpV2.ino

@@ -1,7 +1,7 @@
 //------------------------------------------------------------------------------
 // Include the IRremote library header
 //
-#include <IRremote.h>
+#include <AIRremote.h>
 
 //------------------------------------------------------------------------------
 // Tell IRremote which Arduino pin is connected to the IR Receiver (TSOP4838)

examples/IRrelay/IRrelay.ino

@@ -6,7 +6,7 @@
  * http://arcfn.com
  */
 
-#include <IRremote.h>
+#include <AIRremote.h>
 
 int RECV_PIN = 11;
 int RELAY_PIN = 4;

examples/IRremoteInfo/IRremoteInfo.ino

@@ -11,7 +11,7 @@
  */
 
 
-#include <IRremote.h>
+#include <AIRremote.h>
 
 void setup()
 {
@@ -224,7 +224,7 @@ void dumpFooter() {
   Serial.println(F("Notes: "));
   Serial.println(F("     - Most of the seetings above can be configured in the following files included as part of the library"));
   Serial.println(F("     - IRremteInt.h"));
-  Serial.println(F("     - IRremote.h"));
+  Serial.println(F("     - AIRremote.h"));
   Serial.println(F("     - You can save SRAM by disabling the Decode or Send features for any protocol (Near the top of IRremoteInt.h)"));
   Serial.println(F("     - Some Timer conflicts, with other libraries, can be easily resolved by configuring a differnt Timer for your platform"));
 }

examples/IRsendDemo/IRsendDemo.ino

@@ -7,7 +7,7 @@
  */
 
 
-#include <IRremote.h>
+#include <AIRremote.h>
 
 IRsend irsend;
 

examples/IRsendRawDemo/IRsendRawDemo.ino

@@ -18,7 +18,7 @@
  */
 
 
-#include <IRremote.h>
+#include <AIRremote.h>
 
 IRsend irsend;
 

examples/IRtest/IRtest.ino

@@ -4,12 +4,12 @@
  * Copyright 2009 Ken Shirriff
  * http://arcfn.com
  *
- * Note: to run these tests, edit IRremote/IRremote.h to add "#define TEST"
+ * Note: to run these tests, edit IRremote/AIRremote.h to add "#define TEST"
  * You must then recompile the library by removing IRremote.o and restarting
  * the arduino IDE.
  */
 
-#include <IRremote.h>
+#include <AIRremote.h>
 #include <IRremoteInt.h>
 
 // Dumps out the decode_results structure.

examples/IRtest2/IRtest2.ino

@@ -25,7 +25,7 @@
  * http://arcfn.com
  */
 
-#include <IRremote.h>
+#include <AIRremote.h>
 
 int RECV_PIN = 11;
 int LED_PIN = 3;

examples/JVCPanasonicSendDemo/JVCPanasonicSendDemo.ino

@@ -6,7 +6,7 @@
  * http://arcfn.com
  * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
  */
-#include <IRremote.h>
+#include <AIRremote.h>
  
 #define PanasonicAddress      0x4004     // Panasonic address (Pre data) 
 #define PanasonicPower        0x100BCBD  // Panasonic Power button

examples/LGACSendDemo/LGACSendDemo.ino

@@ -1,4 +1,4 @@
-#include <IRremote.h>
+#include <AIRremote.h>
 #include <Wire.h>
 
 

examples/LegoPowerFunctionsSendDemo/LegoPowerFunctionsSendDemo.ino

@@ -3,7 +3,7 @@
  * Copyright (c) 2016 Philipp Henkel
  */
 
-#include <IRremote.h>
+#include <AIRremote.h>
 #include <IRremoteInt.h>
 
 IRsend irsend;

irPronto.cpp

@@ -17,7 +17,7 @@
 	void  mark        (int t)     { printf("+%d," , t); }
 	void  space       (int t)     { printf("-%d, ", t); }
 #else
-#	include "IRremote.h"
+#	include "AIRremote.h"
 #endif // TEST
 
 //+=============================================================================

irRecv.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //+=============================================================================

irSend.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //+=============================================================================

ir_Aiwa.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //==============================================================================

ir_Denon.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 // Reverse Engineered by looking at RAW dumps generated by IRremote

ir_Dish.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //==============================================================================

ir_JVC.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //==============================================================================

ir_LG.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //==============================================================================

ir_Lego_PF.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 #include "ir_Lego_PF_BitStreamEncoder.h"
 

ir_Mitsubishi.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //==============================================================================

ir_NEC.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //==============================================================================

ir_Panasonic.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //==============================================================================

ir_RC5_RC6.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //+=============================================================================

ir_Samsung.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //==============================================================================

ir_Sanyo.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //==============================================================================

ir_Sharp.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //==============================================================================

ir_Sony.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //==============================================================================

ir_Template.cpp

@@ -31,7 +31,7 @@ You have written the code to support your new protocol!
 
 Now you must do a few things to add it to the IRremote system:
 
-1. Open IRremote.h and make the following changes:
+1. Open AIRremote.h and make the following changes:
    REMEMEBER to change occurences of "SHUZU" with the name of your protocol
 
    A. At the top, in the section "Supported Protocols", add:
@@ -91,7 +91,7 @@ Regards,
   BlueChip
 */
 
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //==============================================================================

ir_Whynter.cpp

@@ -1,4 +1,4 @@
-#include "IRremote.h"
+#include "AIRremote.h"
 #include "IRremoteInt.h"
 
 //==============================================================================