Added missing #endif

Create readmdFrench.md

Contributors.md

@@ -3,7 +3,6 @@ These are the active contributors of this project that you may contact if there
 
 - [z3t0](https://github.com/z3t0) : Active Contributor and currently also the main contributor.
   * Email: zetoslab@gmail.com
-  * Skype: polarised16
 - [shirriff](https://github.com/shirriff) : An amazing person who worked to create this awesome library and provide unending support
 - [AnalysIR](https:/github.com/AnalysIR): Active contributor and is amazing with providing support!
 - [Informatic](https://github.com/Informatic) : Active contributor

IRremote.h

@@ -79,6 +79,9 @@
 #define DECODE_LEGO_PF       0 // NOT WRITTEN
 #define SEND_LEGO_PF         1
 
+#define DECODE_NERF_LOP      0 // NOT WRITTEN
+#define SEND_NERF_LOP        1
+
 //------------------------------------------------------------------------------
 // When sending a Pronto code we request to send either the "once" code
 //                                                   or the "repeat" code
@@ -119,6 +122,7 @@ typedef
 		DENON,
 		PRONTO,
 		LEGO_PF,
+	        NERF_LOP,
 	}
 decode_type_t;
 
@@ -251,6 +255,10 @@ class IRrecv
 #		if DECODE_LEGO_PF
 			bool  decodeLegoPowerFunctions (decode_results *results) ;
 #		endif
+//......................................................................
+#		if DECODE_NERF_LOP
+			bool  decodeNerfLOP (decode_results *results) ;
+#               endif
 } ;
 
 //------------------------------------------------------------------------------
@@ -339,6 +347,10 @@ class IRsend
 #		if SEND_LEGO_PF
 			void  sendLegoPowerFunctions (uint16_t data, bool repeat = true) ;
 #		endif
+//......................................................................
+#		if SEND_NERF_LOP
+			void  sendNerfLOP (uint16_t data, bool repeat = true) ;
+#               endif
 } ;
 
 #endif

README.md

@@ -17,6 +17,12 @@ Tutorials and more information will be made available on [the official homepage]
 4. Move the "IRremote" folder that has been extracted to your libraries directory.
 5. Make sure to delete Arduino_Root/libraries/RobotIRremote. Where Arduino_Root refers to the install directory of Arduino. The library RobotIRremote has similar definitions to IRremote and causes errors.
 
+
+## FAQ
+- IR does not work right when I use Neopixels (aka WS2811/WS2812/WS2812B)  
+Whether you use the Adafruit Neopixel lib, or FastLED, interrupts get disabled on many lower end CPUs like the basic arduinos. In turn, this stops the IR interrupt handler from running when it needs to. There are some solutions to this on some processors, [see this page from Marc MERLIN](http://marc.merlins.org/perso/arduino/post_2017-04-03_Arduino-328P-Uno-Teensy3_1-ESP8266-ESP32-IR-and-Neopixels.html)
+
+
 ## Supported Boards
 - Arduino Uno / Mega / Leonardo / Duemilanove / Diecimila / LilyPad / Mini / Fio / Nano etc.
 - Teensy 1.0 / 1.0++ / 2.0 / 2++ / 3.0 / 3.1 / Teensy-LC; Credits: @PaulStoffregen (Teensy Team)
@@ -26,6 +32,8 @@ Tutorials and more information will be made available on [the official homepage]
 - ATmega64, 128
 - ATtiny 84 / 85
 - ESP32 (receive only)
+- ESP8266 is supported in a fork based on an old codebase that isn't as recent, but it works reasonably well given that perfectly timed sub millisecond interrupts are different on that chip. See https://github.com/markszabo/IRremoteESP8266
+- Sparkfun Pro Micro
 
 We are open to suggestions for adding support to new boards, however we highly recommend you contact your supplier first and ask them to provide support from their side.
 
@@ -44,12 +52,19 @@ We are open to suggestions for adding support to new boards, however we highly r
 | [ATmega64, ATmega128](https://github.com/MCUdude/MegaCore)               | **13**              | **1**             |
 | ATmega1280, ATmega2560                                                   | 5, 6, **9**, 11, 46 | 1, **2**, 3, 4, 5 |
 | [ESP32](http://esp32.net/)                                               | N/A (not supported) | **1**             |
+| [Sparkfun Pro Micro](https://www.sparkfun.com/products/12640)            | 9, **5**, 5         | 1, **3**, 4_HS    |
 | [Teensy 1.0](https://www.pjrc.com/teensy/)                               | **17**              | **1**             |
 | [Teensy 2.0](https://www.pjrc.com/teensy/)                               | 9, **10**, 14       | 1, 3, **4_HS**    |
 | [Teensy++ 1.0 / 2.0](https://www.pjrc.com/teensy/)                       | **1**, 16, 25       | 1, **2**, 3       |
 | [Teensy 3.0 / 3.1](https://www.pjrc.com/teensy/)                         | **5**               | **CMT**           |
 | [Teensy-LC](https://www.pjrc.com/teensy/)                                | **16**              | **TPM1**          |
 
+
+### Experimental patches
+The following are strictly community supported patches that have yet to make it into mainstream. If you have issues feel free to ask here. If it works well then let us know!
+
+[Arduino 101](https://github.com/z3t0/Arduino-IRremote/pull/481#issuecomment-311243146)
+
 The table above lists the currently supported timers and corresponding send pins, many of these can have additional pins opened up and we are open to requests if a need arises for other pins.
 
 ## Usage

boarddefs.h

@@ -15,6 +15,8 @@
 //
 // JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
 // Whynter A/C ARC-110WD added by Francesco Meschia
+
+// Sparkfun Pro Micro support by Alastair McCormack
 //******************************************************************************
 
 #ifndef boarddefs_h
@@ -70,8 +72,14 @@
 //   switch IRremote to use a different timer.
 //
 
+// Sparkfun Pro Micro
+#if defined(ARDUINO_AVR_PROMICRO)
+	//#define IR_USE_TIMER1     // tx = pin 9
+	#define IR_USE_TIMER3       // tx = pin 5
+	//#define IR_USE_TIMER4_HS  // tx = pin 5
+
 // Arduino Mega
-#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
 	//#define IR_USE_TIMER1   // tx = pin 11
 	#define IR_USE_TIMER2     // tx = pin 9
 	//#define IR_USE_TIMER3   // tx = pin 5
@@ -246,19 +254,18 @@
 #	define TIMER_PWM_PIN  CORE_OC1A_PIN  // Teensy
 #elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
 #	define TIMER_PWM_PIN  11             // Arduino Mega
-#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
-#	define TIMER_PWM_PIN  13	     // MegaCore
 #elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
 || defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
 || defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
 || defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
 || defined(__AVR_ATmega164P__) || defined(__AVR_ATmega32__) \
-|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega8535__)
-#	define TIMER_PWM_PIN  13             // MightyCore
+|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega8535__) \
+|| defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
+#	define TIMER_PWM_PIN  13             // MightyCore, MegaCore
 #elif defined(__AVR_ATtiny84__)
 # 	define TIMER_PWM_PIN  6
 #else
-#	define TIMER_PWM_PIN  9              // Arduino Duemilanove, Diecimila, LilyPad, etc
+#	define TIMER_PWM_PIN  9              // Arduino Duemilanove, Diecimila, LilyPad, Sparkfun Pro Micro etc
 #endif					     // ATmega48, ATmega88, ATmega168, ATmega328
 
 //---------------------------------------------------------
@@ -291,8 +298,8 @@
 //-----------------
 #if defined(CORE_OC3A_PIN)
 #	define TIMER_PWM_PIN  CORE_OC3A_PIN  // Teensy
-#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-#	define TIMER_PWM_PIN  5              // Arduino Mega
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(ARDUINO_AVR_PROMICRO)
+#	define TIMER_PWM_PIN  5              // Arduino Mega, Sparkfun Pro Micro
 #elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
 #	define TIMER_PWM_PIN  6              // MightyCore
 #else
@@ -305,12 +312,21 @@
 #elif defined(IR_USE_TIMER4_HS)
 
 #define TIMER_RESET
-#define TIMER_ENABLE_PWM    (TCCR4A |= _BV(COM4A1))
-#define TIMER_DISABLE_PWM   (TCCR4A &= ~(_BV(COM4A1)))
+
+#if defined(ARDUINO_AVR_PROMICRO) // Sparkfun Pro Micro                         
+	#define TIMER_ENABLE_PWM    (TCCR4A |= _BV(COM4A0))     // Use complimentary O̅C̅4̅A̅ output on pin 5
+	#define TIMER_DISABLE_PWM   (TCCR4A &= ~(_BV(COM4A0)))  // (Pro Micro does not map PC7 (32/ICP3/CLK0/OC4A)
+															// of ATmega32U4 )
+#else
+	#define TIMER_ENABLE_PWM    (TCCR4A |= _BV(COM4A1))
+	#define TIMER_DISABLE_PWM   (TCCR4A &= ~(_BV(COM4A1)))
+#endif
+
 #define TIMER_ENABLE_INTR   (TIMSK4 = _BV(TOIE4))
 #define TIMER_DISABLE_INTR  (TIMSK4 = 0)
 #define TIMER_INTR_NAME     TIMER4_OVF_vect
 
+
 #define TIMER_CONFIG_KHZ(val) ({ \
 	const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
 	TCCR4A                = (1<<PWM4A); \
@@ -339,6 +355,8 @@
 //-----------------
 #if defined(CORE_OC4A_PIN)
 #	define TIMER_PWM_PIN  CORE_OC4A_PIN  // Teensy
+#elif defined(ARDUINO_AVR_PROMICRO)
+#	define TIMER_PWM_PIN  5              // Sparkfun Pro Micro
 #elif defined(__AVR_ATmega32U4__)
 #	define TIMER_PWM_PIN  13             // Leonardo
 #else

examples/IRrecord/IRrecord.ino

@@ -45,7 +45,7 @@ int toggle = 0; // The RC5/6 toggle state
 // Most of this code is just logging
 void storeCode(decode_results *results) {
   codeType = results->decode_type;
-  int count = results->rawlen;
+  //int count = results->rawlen;
   if (codeType == UNKNOWN) {
     Serial.println("Received unknown code, saving as raw");
     codeLen = results->rawlen - 1;

examples/IRtest2/IRtest2.ino

@@ -61,7 +61,7 @@ void setup()
 // Wait for the gap between tests, to synchronize with
 // the sender.
 // Specifically, wait for a signal followed by a gap of at last gap ms.
-void waitForGap(int gap) {
+void waitForGap(unsigned long gap) {
   Serial.println("Waiting for gap");
   while (1) {
     while (digitalRead(RECV_PIN) == LOW) { 
@@ -125,7 +125,7 @@ void dump(decode_results *results) {
 // The motivation behind this method is that the sender and the receiver
 // can do the same test calls, and the mode variable indicates whether
 // to send or receive.
-void test(char *label, int type, unsigned long value, int bits) {
+void test(const char *label, int type, unsigned long value, int bits) {
   if (mode == SENDER) {
     Serial.println(label);
     if (type == NEC) {
@@ -175,7 +175,7 @@ void test(char *label, int type, unsigned long value, int bits) {
 
 // Test raw send or receive.  This is similar to the test method,
 // except it send/receives raw data.
-void testRaw(char *label, unsigned int *rawbuf, int rawlen) {
+void testRaw(const char *label, unsigned int *rawbuf, int rawlen) {
   if (mode == SENDER) {
     Serial.println(label);
     irsend.sendRaw(rawbuf, rawlen, 38 /* kHz */);

examples/LGACSendDemo/LGACSendDemo.ino

@@ -192,12 +192,12 @@ void loop()
         ac_activate(AC_TEMPERATURE, AC_FLOW);
         break;
       case 2:
-        if ( b == 0 | b == 1 ) {
+        if ( b == 0 || b == 1 ) {
           ac_change_air_swing(b);
         }
         break;
       case 3: // 1  : clean on, power on
-        if ( b == 0 | b == 1 ) {
+        if ( b == 0 || b == 1 ) {
           ac_air_clean(b);
         }
         break;

irRecv.cpp

@@ -1,10 +1,10 @@
 #include "IRremote.h"
 #include "IRremoteInt.h"
-
-#ifdef IR_TIMER_USE_ESP32
-hw_timer_t *timer;
-void IRTimer(); // defined in IRremote.cpp
-#endif
+
+#ifdef IR_TIMER_USE_ESP32
+hw_timer_t *timer;
+void IRTimer(); // defined in IRremote.cpp
+#endif
 
 //+=============================================================================
 // Decodes the received IR message
@@ -89,6 +89,11 @@ int  IRrecv::decode (decode_results *results)
 	DBG_PRINTLN("Attempting Lego Power Functions");
 	if (decodeLegoPowerFunctions(results))  return true ;
 #endif
+	
+#if DECODE_NERF_LOP
+	DBG_PRINTLN("Attempting Nerf Laser Ops Pro Functions");
+	if (decodeNerfLOP(results))  return true ;
+#endif
 
 	// decodeHash returns a hash on any input.
 	// Thus, it needs to be last in the list.
@@ -122,17 +127,17 @@ IRrecv::IRrecv (int recvpin, int blinkpin)
 //
 void  IRrecv::enableIRIn ( )
 {
-// Interrupt Service Routine - Fires every 50uS
-#ifdef ESP32
-	// ESP32 has a proper API to setup timers, no weird chip macros needed
-	// simply call the readable API versions :)
-	// 3 timers, choose #1, 80 divider nanosecond precision, 1 to count up
-	timer = timerBegin(1, 80, 1);
-	timerAttachInterrupt(timer, &IRTimer, 1);
-	// every 50ns, autoreload = true
-	timerAlarmWrite(timer, 50, true);
-	timerAlarmEnable(timer);
-#else
+// Interrupt Service Routine - Fires every 50uS
+#ifdef ESP32
+	// ESP32 has a proper API to setup timers, no weird chip macros needed
+	// simply call the readable API versions :)
+	// 3 timers, choose #1, 80 divider nanosecond precision, 1 to count up
+	timer = timerBegin(1, 80, 1);
+	timerAttachInterrupt(timer, &IRTimer, 1);
+	// every 50ns, autoreload = true
+	timerAlarmWrite(timer, 50, true);
+	timerAlarmEnable(timer);
+#else
 	cli();
 	// Setup pulse clock timer interrupt
 	// Prescale /8 (16M/8 = 0.5 microseconds per tick)
@@ -146,7 +151,7 @@ void  IRrecv::enableIRIn ( )
 	TIMER_RESET;
 
 	sei();  // enable interrupts
-#endif
+#endif
 
 	// Initialize state machine variables
 	irparams.rcvstate = STATE_IDLE;

ir_NerfLaserOpsPro.cpp

@@ -0,0 +1,89 @@
+#include "IRremote.h"
+#include "IRremoteInt.h"
+
+//==============================================================================
+//
+//
+//                              NERF LASER OPS PRO
+//
+//
+//==============================================================================
+
+#define BITS          15  // The number of bits in the command
+
+#define HDR_MARK    2800  // The length of the Header:Mark
+#define HDR_SPACE   6000  // The lenght of the Header:Space
+
+#define ONE_MARK    1800  // The length of a Bit:Mark for 1's
+#define ZERO_MARK    800  // The length of a Bit:Mark for 0's
+#define ALL_SPACE   2100  // The length of a Bit:Space
+
+#define purpule 0x440
+#define red     0x400
+#define blue    0x420
+
+//+=============================================================================
+//
+#if SEND_NERF_LOP
+void  IRsend::sendNerfLOP (unsigned long data,  int nbits)
+{
+	// Set IR carrier frequency
+	enableIROut(40);
+
+	// Header
+	mark (HDR_MARK);
+	space(HDR_SPACE);
+  mark (HDR_MARK);
+
+	// Data
+	for (unsigned long  mask = 1UL << (nbits - 1);  mask;  mask >>= 1) {
+		if (data & mask) {
+      space(ALL_SPACE);
+			mark (ONE_MARK);
+		} else {
+			space(ALL_SPACE);
+			mark (ZERO_MARK);
+		}
+	}
+  
+  space(0);  // Always end with the LED off
+}
+#endif
+
+//+=============================================================================
+//
+#if DECODE_NERF_LOP
+bool  IRrecv::decodeNerfLOP (decode_results *results)
+{
+  //NOT IMPLEMENTED YET
+  return false;
+	unsigned long  data   = 0;  // Somewhere to build our code
+	int            offset = 1;  // Skip the Gap reading
+
+	// Check we have the right amount of data
+	if (irparams.rawlen != 1 + 2 + (2 * BITS) + 1)  return false ;
+
+	// Check initial Mark+Space match
+	if (!MATCH_MARK (results->rawbuf[offset++], HDR_MARK ))  return false ;
+	if (!MATCH_SPACE(results->rawbuf[offset++], HDR_SPACE))  return false ;
+
+	// Read the bits in
+	for (int i = 0;  i < SHUZU_BITS;  i++) {
+		// Each bit looks like: MARK + SPACE_1 -> 1
+		//                 or : MARK + SPACE_0 -> 0
+		if (!MATCH_MARK(results->rawbuf[offset++], BIT_MARK))  return false ;
+
+		// IR data is big-endian, so we shuffle it in from the right:
+		if      (MATCH_SPACE(results->rawbuf[offset], ONE_SPACE))   data = (data << 1) | 1 ;
+		else if (MATCH_SPACE(results->rawbuf[offset], ZERO_SPACE))  data = (data << 1) | 0 ;
+		else                                                        return false ;
+		offset++;
+	}
+
+	// Success
+	results->bits        = BITS;
+	results->value       = data;
+	results->decode_type = SHUZU;
+	return true;
+}
+#endif

readmdFrench.md

@@ -0,0 +1,97 @@
+##  IRremote Library
+
+
+Cette bibliothèque vous permet d'envoyer et de recevoir des signaux infrarouges sur un Arduino.
+Des tutoriels et plus d'informations seront disponibles sur la page d'accueil officielle.
+
+## Version - 2.2.3
+
+## Installation
+1. Allez à la [Releases](https://github.com/z3t0/Arduino-IRremote/releases) page.
+2. Téléchargez la dernière version.
+3. Extraire le fichier zip
+4. Déplacez le dossier "IRremote" vers vos bibliothèques.
+5. Assurez-vous de supprimer Arduino_Root / libraries / RobotIRremote. Où Arduino_Root fait référence au répertoire d'installation d'Arduino. La bibliothèque RobotIRremote a des définitions similaires à IRremote et provoque des erreurs.
+
+
+## FAQ
+Je ne travaille pas correctement en utilisant Neopixels (aka WS2811 / WS2812 / WS2812B)
+Que vous utilisiez la librairie Adafruit Neopixel ou FastLED, les interruptions sont désactivées sur de nombreux processeurs bas de gamme comme les arduinos de base. À son tour, cela empêche le gestionnaire IR de s'exécuter quand il le faut. Il y a quelques solutions à ce processus, voir cette page de Marc MERLIN
+[cette page de Marc MERLIN](http://marc.merlins.org/perso/arduino/post_2017-04-03_Arduino-328P-Uno-Teensy3_1-ESP8266-ESP32-IR-and-Neopixels.html)
+
+
+## Conseils pris en charge
+
+- Teensy 1.0 / 1.0++ / 2.0 / 2++ / 3.0 / 3.1 / Teensy-LC; Crédits: @PaulStoffregen (Teensy Team)
+- Sanguino
+- ATmega8, 48, 88, 168, 328
+- ATmega8535, 16, 32, 164, 324, 644, 1284,
+- ATmega64, 128
+- ATtiny 84 / 85
+- ESP32 (recevoir seulement)
+- ESP8266 est basé sur un ancien code qui n'est pas très récent, mais cela fonctionne raisonnablement bien. Voir https://github.com/markszabo/IRremoteESP8266
+Sparkfun Pro Micro
+
+
+
+
+Nous sommes ouverts aux suggestions d'ajout de support pour les nouveaux tableaux, cependant, nous vous recommandons fortement de contacter votre fournisseur et de fournir un soutien de leur côté.
+
+
+## Spécifications matérielles
+
+
+| Carte/CPU                                                                | Envoyer Pin         | Compteurs         |
+|--------------------------------------------------------------------------|---------------------|-------------------|
+| [ATtiny84](https://github.com/SpenceKonde/ATTinyCore)                    | **6**               | **1**             |
+| [ATtiny85](https://github.com/SpenceKonde/ATTinyCore)                    | **1**               | **TINY0**         |
+| [ATmega8](https://github.com/MCUdude/MiniCore)                           | **9**               | **1**             |
+| Atmega32u4                                                               | 5, 9, **13**        | 1, 3, **4**       |
+| [ATmega48, ATmega88, ATmega168, ATmega328](https://github.com/MCUdude/MiniCore) | **3**, 9     | 1, **2**          |
+| [ATmega1284](https://github.com/MCUdude/MightyCore)                      | 13, 14, 6           | 1, **2**, 3       |
+| [ATmega164, ATmega324, ATmega644](https://github.com/MCUdude/MightyCore) | 13, **14**          | 1, **2**          |
+| [ATmega8535 ATmega16, ATmega32](https://github.com/MCUdude/MightyCore)   | **13**              | **1**             |
+| [ATmega64, ATmega128](https://github.com/MCUdude/MegaCore)               | **13**              | **1**             |
+| ATmega1280, ATmega2560                                                   | 5, 6, **9**, 11, 46 | 1, **2**, 3, 4, 5 |
+| [ESP32](http://esp32.net/)                                               | N/A (insupporté) | **1**             |
+| [Sparkfun Pro Micro](https://www.sparkfun.com/products/12640)            | 9, **5**, 5         | 1, **3**, 4_HS    |
+| [Teensy 1.0](https://www.pjrc.com/teensy/)                               | **17**              | **1**             |
+| [Teensy 2.0](https://www.pjrc.com/teensy/)                               | 9, **10**, 14       | 1, 3, **4_HS**    |
+| [Teensy++ 1.0 / 2.0](https://www.pjrc.com/teensy/)                       | **1**, 16, 25       | 1, **2**, 3       |
+| [Teensy 3.0 / 3.1](https://www.pjrc.com/teensy/)                         | **5**               | **CMT**           |
+| [Teensy-LC](https://www.pjrc.com/teensy/)                                | **16**              | **TPM1**          |
+
+
+## Patchs expérimentaux
+
+Voici les correctifs strictement pris en charge qui n'ont pas encore été intégrés. Si vous avez des questions, n'hésitez pas à demander ici. Si cela fonctionne, faites le nous savoir!
+
+[Arduino 101](https://github.com/z3t0/Arduino-IRremote/pull/481#issuecomment-311243146)
+
+Le tableau ci-dessus répertorie les temporisations actuellement supportées et les broches d'envoi correspondantes, beaucoup de ces broches supplémentaires sont ouvertes.
+
+
+## Utilisation
+- À faire TODO (Vérifier les exemples pour l'instant)
+
+
+## Contribution
+Si vous voulez contribuer à ce projet:
+- Signaler les bogues et les erreurs
+- Demander des améliorations
+- Créer des problèmes et tirer des requêtes
+- Parlez de cette bibliothèque à d'autres personnes
+- Contribuer de nouveaux protocoles
+Vérifiez ici [ici](Contributing.md) pour quelques guidelines
+
+
+## Contact
+Email: zetoslab@gmail.com
+Please only email me if it is more appropriate than creating an Issue / PR. I **will** not respond to requests for adding support for particular boards, unless of course you are the creator of the board and would like to cooperate on the project. I will also **ignore** any emails asking me to tell you how to implement your ideas. However, if you have a private inquiry that you would only apply to you and you would prefer it to be via email, by all means.
+
+## Contributeurs
+Check [here](Contributors.md)
+@Lsuperman735 French translation 
+
+## Copyright
+Copyright 2009-2012 Ken Shirriff