/*
 * IRremote
 * Version 0.1 July, 2009
 * Copyright 2009 Ken Shirriff
 * For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.htm http://arcfn.com
 * Edited by Mitra to add new controller SANYO
 *
 * Interrupt code based on NECIRrcv by Joe Knapp
 * http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
 * Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
 *
 * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
 * LG added by Darryl Smith (based on the JVC protocol)
 * Whynter A/C ARC-110WD added by Francesco Meschia
 */

#ifndef IRremote_h
#define IRremote_h

// The following are compile-time library options.
// If you change them, recompile the library.
// If DEBUG is defined, a lot of debugging output will be printed during decoding.
// TEST must be defined for the IRtest unittests to work.  It will make some
// methods virtual, which will be slightly slower, which is why it is optional.
//#define DEBUG
// #define TEST

enum decode_type_t {
	UNKNOWN      = -1,
	UNUSED       =  0,
	NEC          =  1,
	SONY         =  2,
	RC5          =  3,
	RC6          =  4,
	DISH         =  5,
	SHARP        =  6,
	PANASONIC    =  7,
	JVC          =  8,
	SANYO        =  9,
	MITSUBISHI   = 10,
	SAMSUNG      = 11,
	LG           = 12,
	WHYNTER      = 13,
	AIWA_RC_T501 = 14,

};

// Results returned from the decoder
class decode_results {
public:
  decode_type_t decode_type; // NEC, SONY, RC5, UNKNOWN
  union { // This is used for decoding Panasonic and Sharp data
    unsigned int panasonicAddress;
    unsigned int sharpAddress;
  };
  unsigned long value; // Decoded value
  int bits; // Number of bits in decoded value
  volatile unsigned int *rawbuf; // Raw intervals in .5 us ticks
  int rawlen; // Number of records in rawbuf.
};

// Decoded value for NEC when a repeat code is received
#define REPEAT 0xffffffff

// main class for receiving IR
class IRrecv
{
public:
  IRrecv(int recvpin);
  void blink13(int blinkflag);
  int decode(decode_results *results);
  void enableIRIn();
  void resume();
private:
  // These are called by decode
  int getRClevel(decode_results *results, int *offset, int *used, int t1);
#ifdef DECODE_NEC
  long decodeNEC(decode_results *results);
#endif
#ifdef DECODE_SONY
  long decodeSony(decode_results *results);
#endif
#ifdef DECODE_SANYO
  long decodeSanyo(decode_results *results);
#endif
#ifdef DECODE_MITSUBISHI
  long decodeMitsubishi(decode_results *results);
#endif
#ifdef DECODE_RC5
  long decodeRC5(decode_results *results);
#endif
#ifdef DECODE_RC6
  long decodeRC6(decode_results *results);
#endif
#ifdef DECODE_PANASONIC
  long decodePanasonic(decode_results *results);
#endif
#ifdef DECODE_LG
  long decodeLG(decode_results *results);
#endif
#ifdef DECODE_JVC
  long decodeJVC(decode_results *results);
#endif
#ifdef DECODE_SAMSUNG
  long decodeSAMSUNG(decode_results *results);
#endif

#ifdef DECODE_WHYNTER
  long decodeWhynter(decode_results *results);
#endif

#ifdef DECODE_AIWA_RC_T501
  long decodeAiwaRCT501(decode_results *results);
#endif

  long decodeHash(decode_results *results);
  int compare(unsigned int oldval, unsigned int newval);

} ;

// Only used for testing; can remove virtual for shorter code
#ifdef TEST
#define VIRTUAL virtual
#else
#define VIRTUAL
#endif

class IRsend
{
public:
  IRsend() {}
  void sendRaw(unsigned int buf[], int len, int hz);
#ifdef SEND_RC5
  void sendRC5(unsigned long data, int nbits);
#endif
#ifdef SEND_RC6
  void sendRC6(unsigned long data, int nbits);
#endif
#ifdef SEND_WHYNTER
  void sendWhynter(unsigned long data, int nbits);
#endif
#ifdef SEND_NEC
  void sendNEC(unsigned long data, int nbits);
#endif
#ifdef SEND_SONY
  void sendSony(unsigned long data, int nbits);
  // Neither Sanyo nor Mitsubishi send is implemented yet
  //  void sendSanyo(unsigned long data, int nbits);
  //  void sendMitsubishi(unsigned long data, int nbits);
#endif
#ifdef SEND_DISH
  void sendDISH(unsigned long data, int nbits);
#endif
#ifdef SEND_SHARP
  void sendSharpRaw(unsigned long data, int nbits);
  void sendSharp(unsigned int address,  unsigned int command);
#endif
#ifdef SEND_PANASONIC
  void sendPanasonic(unsigned int address, unsigned long data);
#endif
#ifdef SEND_JVC
  void sendJVC(unsigned long data, int nbits, int repeat); // *Note instead of sending the REPEAT constant if you want the JVC repeat signal sent, send the original code value and change the repeat argument from 0 to 1. JVC protocol repeats by skipping the header NOT by sending a separate code value like NEC does.
#endif
#ifdef SEND_AIWA_RC_T501
  void sendAiwaRCT501(int code);
#endif
#ifdef SEND_SAMSUNG
  void sendSAMSUNG(unsigned long data, int nbits);
#endif
  void enableIROut(int khz);
  VIRTUAL void mark(int usec);
  VIRTUAL void space(int usec);
} ;

// Some useful constants

#define USECPERTICK 50  // microseconds per clock interrupt tick
#define RAWBUF 100 // Length of raw duration buffer

// Marks tend to be 100us too long, and spaces 100us too short
// when received due to sensor lag.
#define MARK_EXCESS 100

#endif