working on renaming files

added test.sh

src/lib/InfraredRemoteInt.h

@@ -0,0 +1,113 @@
+//******************************************************************************
+// IRremote
+// Version 2.0.1 June, 2015
+// Copyright 2009 Ken Shirriff
+// For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
+//
+// Modified by Paul Stoffregen <paul@pjrc.com> to support other boards and timers
+//
+// Interrupt code based on NECIRrcv by Joe Knapp
+// http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
+// Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
+//
+// JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
+// Whynter A/C ARC-110WD added by Francesco Meschia
+//******************************************************************************
+
+#ifndef IRremoteint_h
+#define IRremoteint_h
+
+//------------------------------------------------------------------------------
+// Include the right Arduino header
+//
+#if defined(ARDUINO) && (ARDUINO >= 100)
+#	include <Arduino.h>
+#else
+#	if !defined(IRPRONTO)
+#		include <WProgram.h>
+#	endif
+#endif
+
+//------------------------------------------------------------------------------
+// This handles definition and access to global variables
+//
+#ifdef IR_GLOBAL
+#	define EXTERN
+#else
+#	define EXTERN extern
+#endif
+
+//------------------------------------------------------------------------------
+// Information for the Interrupt Service Routine
+//
+#define RAWBUF  101  // Maximum length of raw duration buffer
+
+typedef
+	struct {
+		// The fields are ordered to reduce memory over caused by struct-padding
+		uint8_t       rcvstate;        // State Machine state
+		uint8_t       recvpin;         // Pin connected to IR data from detector
+		uint8_t       blinkpin;
+		uint8_t       blinkflag;       // true -> enable blinking of pin on IR processing
+		uint8_t       rawlen;          // counter of entries in rawbuf
+		unsigned int  timer;           // State timer, counts 50uS ticks.
+		unsigned int  rawbuf[RAWBUF];  // raw data
+		uint8_t       overflow;        // Raw buffer overflow occurred
+	}
+irparams_t;
+
+// ISR State-Machine : Receiver States
+#define STATE_IDLE      2
+#define STATE_MARK      3
+#define STATE_SPACE     4
+#define STATE_STOP      5
+#define STATE_OVERFLOW  6
+
+// Allow all parts of the code access to the ISR data
+// NB. The data can be changed by the ISR at any time, even mid-function
+// Therefore we declare it as "volatile" to stop the compiler/CPU caching it
+EXTERN  volatile irparams_t  irparams;
+
+//------------------------------------------------------------------------------
+// Defines for setting and clearing register bits
+//
+#ifndef cbi
+#	define cbi(sfr, bit)  (_SFR_BYTE(sfr) &= ~_BV(bit))
+#endif
+
+#ifndef sbi
+#	define sbi(sfr, bit)  (_SFR_BYTE(sfr) |= _BV(bit))
+#endif
+
+//------------------------------------------------------------------------------
+// Pulse parms are ((X*50)-100) for the Mark and ((X*50)+100) for the Space.
+// First MARK is the one after the long gap
+// Pulse parameters in uSec
+//
+
+// Due to sensor lag, when received, Marks  tend to be 100us too long and
+//                                   Spaces tend to be 100us too short
+#define MARK_EXCESS    100
+
+// Upper and Lower percentage tolerances in measurements
+#define TOLERANCE       25
+#define LTOL            (1.0 - (TOLERANCE/100.))
+#define UTOL            (1.0 + (TOLERANCE/100.))
+
+// Minimum gap between IR transmissions
+#define _GAP            5000
+#define GAP_TICKS       (_GAP/USECPERTICK)
+
+#define TICKS_LOW(us)   ((int)(((us)*LTOL/USECPERTICK)))
+#define TICKS_HIGH(us)  ((int)(((us)*UTOL/USECPERTICK + 1)))
+
+//------------------------------------------------------------------------------
+// IR detector output is active low
+//
+#define MARK   0
+#define SPACE  1
+
+// All board specific stuff has been moved to its own file, included here.
+#include "boarddefs.h"
+
+#endif