Completed adding recs80 sending and decoding

I have tested it using two arduinos (one for sending and the other for
receiving) and have achieved a 90% (estimate) success rate.

examples/IRrecvDumpV2/IRrecvDumpV2.ino

@@ -56,6 +56,7 @@ void  encoding (decode_results *results)
     case AIWA_RC_T501: Serial.print("AIWA_RC_T501");  break ;
     case PANASONIC:    Serial.print("PANASONIC");     break ;
     case DENON:        Serial.print("Denon");         break ;
+    case RECS80:       Serial.print("RECS80");        break ; 
   }
 }
 

library.properties

@@ -3,6 +3,7 @@ version=2.4.0
 author=shirriff, z3t0
 maintainer=z3t0
 sentence=Send and receive infrared signals with multiple protocols
+paragraph=See more at https://github.com/z3t0/Arduino-IRremote
 category=Communication
 url=https://github.com/z3t0/Arduino-IRremote
 architectures=*

src/IRremote.h

@@ -79,7 +79,7 @@
 #define DECODE_LEGO_PF       0 // NOT WRITTEN
 #define SEND_LEGO_PF         1
 
-#define DECODE_RECS80        0 // NOT WRITTEN
+#define DECODE_RECS80        1 // NOT WRITTEN
 #define SEND_RECS80          1 // Still being tested
 
 //------------------------------------------------------------------------------
@@ -122,13 +122,14 @@ typedef
 		DENON,
 		PRONTO,
 		LEGO_PF,
+		RECS80,
 	}
 decode_type_t;
 
 //------------------------------------------------------------------------------
 // Set DEBUG to 1 for lots of lovely debug output
 //
-#define DEBUG  0
+#define DEBUG 0
 
 //------------------------------------------------------------------------------
 // Debug directives
@@ -254,6 +255,10 @@ class IRrecv
 #		if DECODE_LEGO_PF
 			bool  decodeLegoPowerFunctions (decode_results *results) ;
 #		endif
+
+#		if DECODE_RECS80
+		    bool decodeRECS80(decode_results *results);
+#		endif
 } ;
 
 //------------------------------------------------------------------------------
@@ -355,7 +360,7 @@ class IRsend
 #		endif
 		//......................................................................
 #		if SEND_RECS80
-			void  sendRECS80 (uint8_t address, uint8_t address_nbit, uint8_t command, uint8_t command_nbit) ;
+			void  sendRECS80 (uint16_t data) ;
 #		endif
 
 #ifdef USE_SOFT_CARRIER

src/IRremoteInt.h

@@ -89,7 +89,7 @@ EXTERN  volatile irparams_t  irparams;
 #define UTOL            (1.0 + (TOLERANCE/100.))
 
 // Minimum gap between IR transmissions
-#define _GAP            5000
+#define _GAP            8000
 #define GAP_TICKS       (_GAP/USECPERTICK)
 
 #define TICKS_LOW(us)   ((int)(((us)*LTOL/USECPERTICK)))

src/irRecv.cpp

@@ -85,6 +85,11 @@ int  IRrecv::decode (decode_results *results)
 	if (decodeLegoPowerFunctions(results))  return true ;
 #endif
 
+#if DECODE_RECS80
+	DBG_PRINTLN("Attempting RECS80 decode");
+	if (decodeRECS80(results)) return true;
+#endif
+
 	// decodeHash returns a hash on any input.
 	// Thus, it needs to be last in the list.
 	// If you add any decodes, add them before this.

src/ir_RECS80.cpp

@@ -5,15 +5,16 @@
 // Documentation : http://www.sbprojects.com/knowledge/ir/recs80.php
 
 #define RECS80_MARK 158
-#define RECS80_ONE_SPACE 7426
+#define RECS80_ONE_SPACE 7432
-#define RECS80_ZERO_SPACE 4898 
+#define RECS80_ZERO_SPACE 4902
+#define RECS80_BITS 12
+#define RECS80_BITS_DATA 9
+#define RECS80_ADDRESS_BITS 3
+#define RECS80_COMMAND_BITS 6
 
 #if SEND_RECS80
 
-void IRsend::sendRECS80 (uint8_t address, uint8_t address_nbit, uint8_t command, uint8_t command_nbit) {
+void IRsend::sendRECS80 (uint16_t data) {
-  // address: 1 - 3 bits
-  // command: 1 - 7 bits
-
   // Set IR carrier frequency
   enableIROut(38);
 
@@ -21,11 +22,11 @@ void IRsend::sendRECS80 (uint8_t address, uint8_t address_nbit, uint8_t command,
   mark(RECS80_MARK);
   space(RECS80_ONE_SPACE);
 
-  // Address
+  // Data: address and command
-  for (uint8_t mask = 1 << (address_nbit - 1); mask; mask >>=1) {
+  for (uint16_t mask = 1 << (RECS80_COMMAND_BITS + RECS80_ADDRESS_BITS - 1); mask; mask >>=1) {
     mark(RECS80_MARK);
 
-    if (address & mask) {
+    if (data & mask) {
       space(RECS80_ONE_SPACE);
     } else {
       space(RECS80_ZERO_SPACE);
@@ -33,18 +34,59 @@ void IRsend::sendRECS80 (uint8_t address, uint8_t address_nbit, uint8_t command,
 
   }
 
-  // Command
+  mark(RECS80_MARK);
-  for (uint8_t mask = 1 << (command_nbit - 1); mask; mask >>=1) {
+  space(0);
-    mark(RECS80_MARK);
-
-    if (command & mask) {
-      space(RECS80_ONE_SPACE);
-    } else {
-      space(RECS80_ZERO_SPACE);
-    }
-
-  }
 }
 
 
 #endif // SEND_RECS80
+
+#if DECODE_RECS80
+
+bool IRrecv::decodeRECS80 (decode_results *results)
+{
+  long data = 0;
+  long offset = 1;
+
+  // Check that there is enough data
+  if (irparams.rawlen < (2 * RECS80_BITS) - 2) {
+
+    DBG_PRINTLN("Not long enough");
+    DBG_PRINTLN(irparams.rawlen);
+
+    return false;
+  }
+
+  // Initial mark and space
+  if (!MATCH_MARK(results->rawbuf[offset++], RECS80_MARK)) return false;
+  if (!MATCH_SPACE(results->rawbuf[offset++], RECS80_ONE_SPACE)) return false;
+
+  // Data: Address and command stored as one variable
+  for (int i = 0; i < (RECS80_ADDRESS_BITS + RECS80_COMMAND_BITS); i++) {
+    if (!MATCH_MARK(results->rawbuf[offset++], RECS80_MARK)) return false;
+
+    // One
+    if (MATCH_MARK(results->rawbuf[offset], RECS80_ONE_SPACE))
+      data = (data << 1) | 1; 
+
+    // Zero
+    else if (MATCH_MARK(results->rawbuf[offset], RECS80_ZERO_SPACE))
+      data = (data << 1) | 0;
+
+    else return false;
+    offset++;
+  }
+
+  if (!MATCH_MARK(results->rawbuf[offset], RECS80_MARK)) return false;
+
+  // Success
+  results->decode_type = RECS80;
+  results->bits = RECS80_BITS_DATA;
+  results->value = data;
+
+  return true;
+  
+
+}
+
+#endif