mirror of
https://github.com/Theaninova/Arduino-IRremote.git
synced 2026-01-20 08:12:53 +00:00
merge #437
This commit is contained in:
Rafi Khan
140
boarddefs.h
140
boarddefs.h
@@ -20,6 +20,32 @@
|
||||
#ifndef boarddefs_h
|
||||
#define boarddefs_h
|
||||
|
||||
// Define some defaults, that some boards may like to override
|
||||
// (This is to avoid negative logic, ! DONT_... is just awkward.)
|
||||
|
||||
// This board has/needs the avr/interrupt.h
|
||||
#define HAS_AVR_INTERRUPT_H
|
||||
|
||||
// Define if sending is supported
|
||||
#define SENDING_SUPPORTED
|
||||
|
||||
// If defined, a standard enableIRIn function will be define.
|
||||
// Undefine for boards supplying their own.
|
||||
#define USE_DEFAULT_ENABLE_IR_IN
|
||||
|
||||
// Duty cycle in percent for sent signals. Presently takes effect only with USE_SOFT_CARRIER
|
||||
#define DUTY_CYCLE 50
|
||||
|
||||
// If USE_SOFT_CARRIER, this amount (in micro seconds) is subtracted from the
|
||||
// on-time of the pulses.
|
||||
#define PULSE_CORRECTION 3
|
||||
|
||||
// digitalWrite is supposed to be slow. If this is an issue, define faster,
|
||||
// board-dependent versions of these macros SENDPIN_ON(pin) and SENDPIN_OFF(pin).
|
||||
// Portable, possibly slow, default definitions are given at the end of this file.
|
||||
// If defining new versions, feel free to ignore the pin argument if it
|
||||
// is not configurable on the current board.
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
// Defines for blinking the LED
|
||||
//
|
||||
@@ -39,11 +65,31 @@
|
||||
# define BLINKLED_ON() (PORTD |= B00000001)
|
||||
# define BLINKLED_OFF() (PORTD &= B11111110)
|
||||
|
||||
// No system LED on ESP32, disable blinking
|
||||
#elif defined(ARDUINO_ARCH_SAM) || defined(ARDUINO_ARCH_SAMD)
|
||||
# define BLINKLED LED_BUILTIN
|
||||
# define BLINKLED_ON() (digitalWrite(LED_BUILTIN, HIGH))
|
||||
# define BLINKLED_OFF() (digitalWrite(LED_BUILTIN, LOW))
|
||||
|
||||
# define USE_SOFT_CARRIER
|
||||
// Define to use spin wait instead of delayMicros()
|
||||
//# define USE_SPIN_WAIT
|
||||
# undef USE_DEFAULT_ENABLE_IR_IN
|
||||
|
||||
// The default pin used used for sending.
|
||||
# define SEND_PIN 9
|
||||
|
||||
#elif defined(ESP32)
|
||||
# define BLINKLED 255
|
||||
# define BLINKLED_ON() 1
|
||||
# define BLINKLED_OFF() 1
|
||||
// No system LED on ESP32, disable blinking by NOT defining BLINKLED
|
||||
|
||||
// avr/interrupt.h is not present
|
||||
# undef HAS_AVR_INTERRUPT_H
|
||||
|
||||
// Sending not implemented
|
||||
# undef SENDING_SUPPORTED#
|
||||
|
||||
// Supply own enbleIRIn
|
||||
# undef USE_DEFAULT_ENABLE_IR_IN
|
||||
|
||||
#else
|
||||
# define BLINKLED 13
|
||||
# define BLINKLED_ON() (PORTB |= B00100000)
|
||||
@@ -138,6 +184,10 @@
|
||||
|
||||
#elif defined(ESP32)
|
||||
#define IR_TIMER_USE_ESP32
|
||||
|
||||
#elif defined(ARDUINO_ARCH_SAM) || defined(ARDUINO_ARCH_SAMD)
|
||||
#define TIMER_PRESCALER_DIV 64
|
||||
|
||||
#else
|
||||
// Arduino Duemilanove, Diecimila, LilyPad, Mini, Fio, Nano, etc
|
||||
// ATmega48, ATmega88, ATmega168, ATmega328
|
||||
@@ -190,17 +240,17 @@
|
||||
|
||||
//-----------------
|
||||
#if defined(CORE_OC2B_PIN)
|
||||
# define TIMER_PWM_PIN CORE_OC2B_PIN // Teensy
|
||||
# define SEND_PIN CORE_OC2B_PIN // Teensy
|
||||
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
# define TIMER_PWM_PIN 9 // Arduino Mega
|
||||
# define SEND_PIN 9 // Arduino Mega
|
||||
#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
|
||||
|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
|
||||
|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
|
||||
|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
|
||||
|| defined(__AVR_ATmega164P__)
|
||||
# define TIMER_PWM_PIN 14 // MightyCore
|
||||
# define SEND_PIN 14 // MightyCore
|
||||
#else
|
||||
# define TIMER_PWM_PIN 3 // Arduino Duemilanove, Diecimila, LilyPad, etc
|
||||
# define SEND_PIN 3 // Arduino Duemilanove, Diecimila, LilyPad, etc
|
||||
#endif // ATmega48, ATmega88, ATmega168, ATmega328
|
||||
|
||||
//---------------------------------------------------------
|
||||
@@ -243,22 +293,22 @@
|
||||
|
||||
//-----------------
|
||||
#if defined(CORE_OC1A_PIN)
|
||||
# define TIMER_PWM_PIN CORE_OC1A_PIN // Teensy
|
||||
# define SEND_PIN CORE_OC1A_PIN // Teensy
|
||||
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
# define TIMER_PWM_PIN 11 // Arduino Mega
|
||||
# define SEND_PIN 11 // Arduino Mega
|
||||
#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
|
||||
# define TIMER_PWM_PIN 13 // MegaCore
|
||||
# define SEND_PIN 13 // MegaCore
|
||||
#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
|
||||
|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
|
||||
|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
|
||||
|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
|
||||
|| defined(__AVR_ATmega164P__) || defined(__AVR_ATmega32__) \
|
||||
|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega8535__)
|
||||
# define TIMER_PWM_PIN 13 // MightyCore
|
||||
# define SEND_PIN 13 // MightyCore
|
||||
#elif defined(__AVR_ATtiny84__)
|
||||
# define TIMER_PWM_PIN 6
|
||||
# define SEND_PIN 6
|
||||
#else
|
||||
# define TIMER_PWM_PIN 9 // Arduino Duemilanove, Diecimila, LilyPad, etc
|
||||
# define SEND_PIN 9 // Arduino Duemilanove, Diecimila, LilyPad, etc
|
||||
#endif // ATmega48, ATmega88, ATmega168, ATmega328
|
||||
|
||||
//---------------------------------------------------------
|
||||
@@ -290,11 +340,11 @@
|
||||
|
||||
//-----------------
|
||||
#if defined(CORE_OC3A_PIN)
|
||||
# define TIMER_PWM_PIN CORE_OC3A_PIN // Teensy
|
||||
# define SEND_PIN CORE_OC3A_PIN // Teensy
|
||||
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
# define TIMER_PWM_PIN 5 // Arduino Mega
|
||||
# define SEND_PIN 5 // Arduino Mega
|
||||
#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
|
||||
# define TIMER_PWM_PIN 6 // MightyCore
|
||||
# define SEND_PIN 6 // MightyCore
|
||||
#else
|
||||
# error "Please add OC3A pin number here\n"
|
||||
#endif
|
||||
@@ -338,9 +388,9 @@
|
||||
|
||||
//-----------------
|
||||
#if defined(CORE_OC4A_PIN)
|
||||
# define TIMER_PWM_PIN CORE_OC4A_PIN // Teensy
|
||||
# define SEND_PIN CORE_OC4A_PIN // Teensy
|
||||
#elif defined(__AVR_ATmega32U4__)
|
||||
# define TIMER_PWM_PIN 13 // Leonardo
|
||||
# define SEND_PIN 13 // Leonardo
|
||||
#else
|
||||
# error "Please add OC4A pin number here\n"
|
||||
#endif
|
||||
@@ -374,9 +424,9 @@
|
||||
|
||||
//-----------------
|
||||
#if defined(CORE_OC4A_PIN)
|
||||
# define TIMER_PWM_PIN CORE_OC4A_PIN
|
||||
# define SEND_PIN CORE_OC4A_PIN
|
||||
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
# define TIMER_PWM_PIN 6 // Arduino Mega
|
||||
# define SEND_PIN 6 // Arduino Mega
|
||||
#else
|
||||
# error "Please add OC4A pin number here\n"
|
||||
#endif
|
||||
@@ -410,9 +460,9 @@
|
||||
|
||||
//-----------------
|
||||
#if defined(CORE_OC5A_PIN)
|
||||
# define TIMER_PWM_PIN CORE_OC5A_PIN
|
||||
# define SEND_PIN CORE_OC5A_PIN
|
||||
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
# define TIMER_PWM_PIN 46 // Arduino Mega
|
||||
# define SEND_PIN 46 // Arduino Mega
|
||||
#else
|
||||
# error "Please add OC5A pin number here\n"
|
||||
#endif
|
||||
@@ -479,7 +529,7 @@
|
||||
CMT_MSC = 0x03; \
|
||||
})
|
||||
|
||||
#define TIMER_PWM_PIN 5
|
||||
#define SEND_PIN 5
|
||||
|
||||
// defines for TPM1 timer on Teensy-LC
|
||||
#elif defined(IR_USE_TIMER_TPM1)
|
||||
@@ -509,7 +559,7 @@
|
||||
FTM1_C0V = 0; \
|
||||
FTM1_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0) | FTM_SC_TOF | FTM_SC_TOIE; \
|
||||
})
|
||||
#define TIMER_PWM_PIN 16
|
||||
#define SEND_PIN 16
|
||||
|
||||
// defines for timer_tiny0 (8 bits)
|
||||
#elif defined(IR_USE_TIMER_TINY0)
|
||||
@@ -543,7 +593,7 @@
|
||||
})
|
||||
#endif
|
||||
|
||||
#define TIMER_PWM_PIN 1 /* ATtiny85 */
|
||||
#define SEND_PIN 1 /* ATtiny85 */
|
||||
|
||||
//---------------------------------------------------------
|
||||
// ESP32 (ESP8266 should likely be added here too)
|
||||
@@ -560,12 +610,29 @@
|
||||
// way to do this on ESP32 is using the RMT built in driver like in this incomplete library below
|
||||
// https://github.com/ExploreEmbedded/ESP32_RMT
|
||||
#elif defined(IR_TIMER_USE_ESP32)
|
||||
#define TIMER_RESET
|
||||
#define TIMER_ENABLE_PWM
|
||||
#define TIMER_DISABLE_PWM Serial.println("IRsend not implemented for ESP32 yet");
|
||||
#define TIMER_ENABLE_INTR
|
||||
#define TIMER_DISABLE_INTR
|
||||
#define TIMER_INTR_NAME
|
||||
|
||||
#define TIMER_RESET
|
||||
|
||||
#ifdef ISR
|
||||
# undef ISR
|
||||
#endif
|
||||
#define ISR(f) void IRTimer()
|
||||
|
||||
#elif defined(ARDUINO_ARCH_SAM) || defined(ARDUINO_ARCH_SAMD)
|
||||
// use timer 3 hardcoded at this time
|
||||
|
||||
#define TIMER_RESET
|
||||
#define TIMER_ENABLE_PWM // Not presently used
|
||||
#define TIMER_DISABLE_PWM
|
||||
#define TIMER_ENABLE_INTR NVIC_EnableIRQ(TC3_IRQn) // Not presently used
|
||||
#define TIMER_DISABLE_INTR NVIC_DisableIRQ(TC3_IRQn)
|
||||
#define TIMER_INTR_NAME TC3_Handler // Not presently used
|
||||
#define TIMER_CONFIG_KHZ(f)
|
||||
|
||||
#ifdef ISR
|
||||
# undef ISR
|
||||
#endif
|
||||
#define ISR(f) void irs()
|
||||
|
||||
//---------------------------------------------------------
|
||||
// Unknown Timer
|
||||
@@ -574,4 +641,13 @@
|
||||
# error "Internal code configuration error, no known IR_USE_TIMER# defined\n"
|
||||
#endif
|
||||
|
||||
// Provide default definitions, portable but possibly slower than necessary.
|
||||
#ifndef SENDPIN_ON
|
||||
#define SENDPIN_ON(pin) digitalWrite(pin, HIGH)
|
||||
#endif
|
||||
|
||||
#ifndef SENDPIN_OFF
|
||||
#define SENDPIN_OFF(pin) digitalWrite(pin, LOW)
|
||||
#endif
|
||||
|
||||
#endif // ! boarddefs_h
|
||||
|
||||
Reference in New Issue
Block a user