Merge pull request #7 from TKJElectronics/master

Added panasonic and JVC protocol and updated the library for Arduino IDE 1.0

IRremote.cpp

@@ -9,6 +9,8 @@
  * Interrupt code based on NECIRrcv by Joe Knapp
  * http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
  * Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
+ *
+ * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
  */
 
 #include "IRremote.h"
@@ -167,7 +169,55 @@ void IRsend::sendRC6(unsigned long data, int nbits)
   }
   space(0); // Turn off at end
 }
-
+void IRsend::sendPanasonic(unsigned int address, unsigned long data) {
+    enableIROut(35);
+    mark(PANASONIC_HDR_MARK);
+    space(PANASONIC_HDR_SPACE);
+    
+    for(int i=0;i<16;i++)
+    {
+        mark(PANASONIC_BIT_MARK);
+        if (address & 0x8000) {
+            space(PANASONIC_ONE_SPACE);
+        } else {
+            space(PANASONIC_ZERO_SPACE);
+        }
+        address <<= 1;        
+    }    
+    for (int i=0; i < 32; i++) {
+        mark(PANASONIC_BIT_MARK);
+        if (data & TOPBIT) {
+            space(PANASONIC_ONE_SPACE);
+        } else {
+            space(PANASONIC_ZERO_SPACE);
+        }
+        data <<= 1;
+    }
+    mark(PANASONIC_BIT_MARK);
+    space(0);
+}
+void IRsend::sendJVC(unsigned long data, int nbits, int repeat)
+{
+    enableIROut(38);
+    data = data << (32 - nbits);
+    if (!repeat){
+        mark(JVC_HDR_MARK);
+        space(JVC_HDR_SPACE); 
+    }
+    for (int i = 0; i < nbits; i++) {
+        if (data & TOPBIT) {
+            mark(JVC_BIT_MARK);
+            space(JVC_ONE_SPACE); 
+        } 
+        else {
+            mark(JVC_BIT_MARK);
+            space(JVC_ZERO_SPACE); 
+        }
+        data <<= 1;
+    }
+    mark(JVC_BIT_MARK);
+    space(0);
+}
 void IRsend::mark(int time) {
   // Sends an IR mark for the specified number of microseconds.
   // The mark output is modulated at the PWM frequency.
@@ -362,6 +412,18 @@ int IRrecv::decode(decode_results *results) {
   if (decodeRC6(results)) {
     return DECODED;
   }
+#ifdef DEBUG
+    Serial.println("Attempting Panasonic decode");
+#endif 
+    if (decodePanasonic(results)) {
+        return DECODED;
+    }
+#ifdef DEBUG
+    Serial.println("Attempting JVC decode");
+#endif 
+    if (decodeJVC(results)) {
+        return DECODED;
+    }
   // decodeHash returns a hash on any input.
   // Thus, it needs to be last in the list.
   // If you add any decodes, add them before this.
@@ -592,6 +654,90 @@ long IRrecv::decodeRC6(decode_results *results) {
   results->decode_type = RC6;
   return DECODED;
 }
+long IRrecv::decodePanasonic(decode_results *results) {
+    unsigned long long data = 0;
+    int offset = 1;
+    
+    if (!MATCH_MARK(results->rawbuf[offset], PANASONIC_HDR_MARK)) {
+        return ERR;
+    }
+    offset++;
+    if (!MATCH_MARK(results->rawbuf[offset], PANASONIC_HDR_SPACE)) {
+        return ERR;
+    }
+    offset++;
+    
+    // decode address
+    for (int i = 0; i < PANASONIC_BITS; i++) {
+        if (!MATCH_MARK(results->rawbuf[offset++], PANASONIC_BIT_MARK)) {
+            return ERR;
+        }
+        if (MATCH_SPACE(results->rawbuf[offset],PANASONIC_ONE_SPACE)) {
+            data = (data << 1) | 1;
+        } else if (MATCH_SPACE(results->rawbuf[offset],PANASONIC_ZERO_SPACE)) {
+            data <<= 1;
+        } else {
+            return ERR;
+        }
+        offset++;
+    }
+    results->value = (unsigned long)data;
+    results->panasonicAddress = (unsigned int)(data >> 32);
+    results->decode_type = PANASONIC;
+    results->bits = PANASONIC_BITS;
+    return DECODED;
+}
+long IRrecv::decodeJVC(decode_results *results) {
+    long data = 0;
+    int offset = 1; // Skip first space
+    // Check for repeat
+    if (irparams.rawlen - 1 == 33 &&
+        MATCH_MARK(results->rawbuf[offset], JVC_BIT_MARK) &&
+        MATCH_MARK(results->rawbuf[irparams.rawlen-1], JVC_BIT_MARK)) {
+        results->bits = 0;
+        results->value = REPEAT;
+        results->decode_type = JVC;
+        return DECODED;
+    } 
+    // Initial mark
+    if (!MATCH_MARK(results->rawbuf[offset], JVC_HDR_MARK)) {
+        return ERR;
+    }
+    offset++; 
+    if (irparams.rawlen < 2 * JVC_BITS + 1 ) {
+        return ERR;
+    }
+    // Initial space 
+    if (!MATCH_SPACE(results->rawbuf[offset], JVC_HDR_SPACE)) {
+        return ERR;
+    }
+    offset++;
+    for (int i = 0; i < JVC_BITS; i++) {
+        if (!MATCH_MARK(results->rawbuf[offset], JVC_BIT_MARK)) {
+            return ERR;
+        }
+        offset++;
+        if (MATCH_SPACE(results->rawbuf[offset], JVC_ONE_SPACE)) {
+            data = (data << 1) | 1;
+        } 
+        else if (MATCH_SPACE(results->rawbuf[offset], JVC_ZERO_SPACE)) {
+            data <<= 1;
+        } 
+        else {
+            return ERR;
+        }
+        offset++;
+    }
+    //Stop bit
+    if (!MATCH_MARK(results->rawbuf[offset], JVC_BIT_MARK)){
+        return ERR;
+    }
+    // Success
+    results->bits = JVC_BITS;
+    results->value = data;
+    results->decode_type = JVC;
+    return DECODED;
+}
 
 /* -----------------------------------------------------------------------
  * hashdecode - decode an arbitrary IR code.

IRremote.h

@@ -7,6 +7,8 @@
  * Interrupt code based on NECIRrcv by Joe Knapp
  * http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
  * Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
+ *
+ * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
  */
 
 #ifndef IRremote_h
@@ -24,6 +26,7 @@
 class decode_results {
 public:
   int decode_type; // NEC, SONY, RC5, UNKNOWN
+  unsigned int panasonicAddress; // This is only used for decoding Panasonic data
   unsigned long value; // Decoded value
   int bits; // Number of bits in decoded value
   volatile unsigned int *rawbuf; // Raw intervals in .5 us ticks
@@ -37,6 +40,8 @@ public:
 #define RC6 4
 #define DISH 5
 #define SHARP 6
+#define PANASONIC 7
+#define JVC 8
 #define UNKNOWN -1
 
 // Decoded value for NEC when a repeat code is received
@@ -58,6 +63,8 @@ private:
   long decodeSony(decode_results *results);
   long decodeRC5(decode_results *results);
   long decodeRC6(decode_results *results);
+  long decodePanasonic(decode_results *results);
+  long decodeJVC(decode_results *results);
   long decodeHash(decode_results *results);
   int compare(unsigned int oldval, unsigned int newval);
 
@@ -82,6 +89,8 @@ public:
   void sendRC6(unsigned long data, int nbits);
   void sendDISH(unsigned long data, int nbits);
   void sendSharp(unsigned long data, int nbits);
+  void sendPanasonic(unsigned int address, unsigned long data);
+  void sendJVC(unsigned long data, int nbits, int repeat); // *Note instead of sending the REPEAT constant if you want the JVC repeat signal sent, send the original code value and change the repeat argument from 0 to 1. JVC protocol repeats by skipping the header NOT by sending a separate code value like NEC does.
   // private:
   void enableIROut(int khz);
   VIRTUAL void mark(int usec);
@@ -92,7 +101,7 @@ public:
 // Some useful constants
 
 #define USECPERTICK 50  // microseconds per clock interrupt tick
-#define RAWBUF 76 // Length of raw duration buffer
+#define RAWBUF 100 // Length of raw duration buffer
 
 // Marks tend to be 100us too long, and spaces 100us too short
 // when received due to sensor lag.

IRremoteInt.h

@@ -9,12 +9,18 @@
  * Interrupt code based on NECIRrcv by Joe Knapp
  * http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
  * Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
+ *
+ * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
  */
 
 #ifndef IRremoteint_h
 #define IRremoteint_h
 
-#include <WProgram.h>
+#if defined(ARDUINO) && ARDUINO >= 100
+#include "Arduino.h"
+#else
+#include "WProgram.h"
+#endif
 
 // define which timer to use
 //
@@ -23,7 +29,7 @@
 // to switch IRremote to use a different timer.
 
 // Arduino Mega
-#if defined(__AVR_ATmega1280__)
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
   //#define IR_USE_TIMER1   // tx = pin 11
   #define IR_USE_TIMER2     // tx = pin 9
   //#define IR_USE_TIMER3   // tx = pin 5
@@ -115,6 +121,19 @@
 #define DISH_RPT_SPACE 6200
 #define DISH_TOP_BIT 0x8000
 
+#define PANASONIC_HDR_MARK 3502
+#define PANASONIC_HDR_SPACE 1750
+#define PANASONIC_BIT_MARK 502
+#define PANASONIC_ONE_SPACE 1244
+#define PANASONIC_ZERO_SPACE 400
+
+#define JVC_HDR_MARK 8000
+#define JVC_HDR_SPACE 4000
+#define JVC_BIT_MARK 600
+#define JVC_ONE_SPACE 1600
+#define JVC_ZERO_SPACE 550
+#define JVC_RPT_LENGTH 60000
+
 #define SHARP_BITS 15
 #define DISH_BITS 16
 
@@ -129,9 +148,9 @@
 #define TICKS_HIGH(us) (int) (((us)*UTOL/USECPERTICK + 1))
 
 #ifndef DEBUG
-#define MATCH(measured_ticks, desired_us) ((measured_ticks) >= TICKS_LOW(desired_us) && (measured_ticks) <= TICKS_HIGH(desired_us))
+int MATCH(int measured, int desired) {return measured >= TICKS_LOW(desired) && measured <= TICKS_HIGH(desired);}
-#define MATCH_MARK(measured_ticks, desired_us) MATCH(measured_ticks, (desired_us) + MARK_EXCESS)
+int MATCH_MARK(int measured_ticks, int desired_us) {return MATCH(measured_ticks, (desired_us + MARK_EXCESS));}
-#define MATCH_SPACE(measured_ticks, desired_us) MATCH((measured_ticks), (desired_us) - MARK_EXCESS)
+int MATCH_SPACE(int measured_ticks, int desired_us) {return MATCH(measured_ticks, (desired_us - MARK_EXCESS));}
 // Debugging versions are in IRremote.cpp
 #endif
 
@@ -165,6 +184,8 @@ extern volatile irparams_t irparams;
 #define SONY_BITS 12
 #define MIN_RC5_SAMPLES 11
 #define MIN_RC6_SAMPLES 1
+#define PANASONIC_BITS 48
+#define JVC_BITS 16
 
 
 
@@ -202,7 +223,7 @@ extern volatile irparams_t irparams;
 #endif
 #if defined(CORE_OC2B_PIN)
 #define TIMER_PWM_PIN        CORE_OC2B_PIN  /* Teensy */
-#elif defined(__AVR_ATmega1280__)
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
 #define TIMER_PWM_PIN        9  /* Arduino Mega */
 #elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
 #define TIMER_PWM_PIN        14 /* Sanguino */
@@ -234,7 +255,7 @@ extern volatile irparams_t irparams;
 })
 #if defined(CORE_OC1A_PIN)
 #define TIMER_PWM_PIN        CORE_OC1A_PIN  /* Teensy */
-#elif defined(__AVR_ATmega1280__)
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
 #define TIMER_PWM_PIN        11  /* Arduino Mega */
 #elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
 #define TIMER_PWM_PIN        13 /* Sanguino */
@@ -266,7 +287,7 @@ extern volatile irparams_t irparams;
 })
 #if defined(CORE_OC3A_PIN)
 #define TIMER_PWM_PIN        CORE_OC3A_PIN  /* Teensy */
-#elif defined(__AVR_ATmega1280__)
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
 #define TIMER_PWM_PIN        5  /* Arduino Mega */
 #else
 #error "Please add OC3A pin number here\n"
@@ -334,7 +355,7 @@ extern volatile irparams_t irparams;
 })
 #if defined(CORE_OC4A_PIN)
 #define TIMER_PWM_PIN        CORE_OC4A_PIN
-#elif defined(__AVR_ATmega1280__)
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
 #define TIMER_PWM_PIN        6  /* Arduino Mega */
 #else
 #error "Please add OC4A pin number here\n"
@@ -364,7 +385,7 @@ extern volatile irparams_t irparams;
 })
 #if defined(CORE_OC5A_PIN)
 #define TIMER_PWM_PIN        CORE_OC5A_PIN
-#elif defined(__AVR_ATmega1280__)
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
 #define TIMER_PWM_PIN        46  /* Arduino Mega */
 #else
 #error "Please add OC5A pin number here\n"
@@ -381,7 +402,7 @@ extern volatile irparams_t irparams;
 #define BLINKLED       CORE_LED0_PIN
 #define BLINKLED_ON()  (digitalWrite(CORE_LED0_PIN, HIGH))
 #define BLINKLED_OFF() (digitalWrite(CORE_LED0_PIN, LOW))
-#elif defined(__AVR_ATmega1280__)
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
 #define BLINKLED       13
 #define BLINKLED_ON()  (PORTB |= B10000000)
 #define BLINKLED_OFF() (PORTB &= B01111111)

examples/IRrecvDump/IRrecvDump.ino

@@ -4,6 +4,7 @@
  * Version 0.1 July, 2009
  * Copyright 2009 Ken Shirriff
  * http://arcfn.com
+ * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
  */
 
 #include <IRremote.h>
@@ -42,6 +43,14 @@ void dump(decode_results *results) {
   else if (results->decode_type == RC6) {
     Serial.print("Decoded RC6: ");
   }
+  else if (results->decode_type == PANASONIC) {	
+    Serial.print("Decoded PANASONIC - Address: ");
+    Serial.print(results->panasonicAddress,HEX);
+    Serial.print(" Value: ");
+  }
+  else if (results->decode_type == JVC) {
+     Serial.print("Decoded JVC: ");
+  }
   Serial.print(results->value, HEX);
   Serial.print(" (");
   Serial.print(results->bits, DEC);

examples/JVCPanasonicSendDemo/JVCPanasonicSendDemo.ino

@@ -0,0 +1,29 @@
+/*
+ * IRremote: IRsendDemo - demonstrates sending IR codes with IRsend
+ * An IR LED must be connected to Arduino PWM pin 3.
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
+ */
+#include <IRremote.h>
+ 
+#define PanasonicAddress      0x4004     // Panasonic address (Pre data) 
+#define PanasonicPower        0x100BCBD  // Panasonic Power button
+
+#define JVCPower              0xC5E8
+
+IRsend irsend;
+
+void setup()
+{
+}
+
+void loop() {
+  irsend.sendPanasonic(PanasonicAddress,PanasonicPower); // This should turn your TV on and off
+  
+  irsend.sendJVC(JVCPower, 16,0); // hex value, 16 bits, no repeat
+  delayMicroseconds(50); // see http://www.sbprojects.com/knowledge/ir/jvc.php for information
+  irsend.sendJVC(JVCPower, 16,1); // hex value, 16 bits, repeat
+  delayMicroseconds(50);
+}

keywords.txt

@@ -24,6 +24,11 @@ sendSony KEYWORD2
 sendRaw KEYWORD2
 sendRC5 KEYWORD2
 sendRC6 KEYWORD2
+sendDISH KEYWORD2
+sendSharp KEYWORD2
+sendPanasonic KEYWORD2
+sendJVC KEYWORD2
+
 #
 #######################################
 # Constants (LITERAL1)
@@ -33,5 +38,9 @@ NEC LITERAL1
 SONY LITERAL1
 RC5 LITERAL1
 RC6 LITERAL1
+DISH LITERAL1
+SHARP LITERAL1
+PANASONIC LITERAL1
+JVC LITERAL1
 UNKNOWN LITERAL1
-REPEAT LITERAL1
+REPEAT LITERAL1