Theaninova/Arduino-IRremote
1
0
Fork 0
mirror of https://github.com/Theaninova/Arduino-IRremote.git synced 2026-01-10 19:52:50 +00:00
Code Issues Packages Projects Releases Wiki Activity

Revert "Added ESP32 IR receive support (IRsend not implemented yet)."

Browse Source
This commit is contained in:
Rafi Khan
2017-04-05 10:27:46 -06:00
committed by GitHub
parent e0c2649b9f
commit 4cdac5fcc8
10 changed files with 8 additions and 74 deletions
Download Patch File Download Diff File Expand all files Collapse all files

37
boarddefs.h
View File

@@ -39,14 +39,9 @@
# define BLINKLED_ON() (PORTD |= B00000001)
# define BLINKLED_OFF() (PORTD &= B11111110)
// No system LED on ESP32, disable blinking
#elif defined(ESP32)
# define BLINKLED 255
# define BLINKLED_ON() 1
# define BLINKLED_OFF() 1
#else
# define BLINKLED 13
# define BLINKLED_ON() (PORTB |= B00100000)
#define BLINKLED_ON() (PORTB |= B00100000)
# define BLINKLED_OFF() (PORTB &= B11011111)
#endif
@@ -130,17 +125,15 @@
// ATtiny84
#elif defined(__AVR_ATtiny84__)
#define IR_USE_TIMER1 // tx = pin 6
#define IR_USE_TIMER1 // tx = pin 6
//ATtiny85
#elif defined(__AVR_ATtiny85__)
#define IR_USE_TIMER_TINY0 // tx = pin 1
#define IR_USE_TIMER_TINY0 // tx = pin 1
#elif defined(ESP32)
#define IR_TIMER_USE_ESP32
#else
// Arduino Duemilanove, Diecimila, LilyPad, Mini, Fio, Nano, etc
// ATmega48, ATmega88, ATmega168, ATmega328
#else
//#define IR_USE_TIMER1 // tx = pin 9
#define IR_USE_TIMER2 // tx = pin 3
@@ -545,28 +538,6 @@
#define TIMER_PWM_PIN 1 /* ATtiny85 */
//---------------------------------------------------------
// ESP32 (ESP8266 should likely be added here too)
//
// ESP32 has it own timer API and does not use these macros, but to avoid ifdef'ing
// them out in the common code, they are defined to no-op. This allows the code to compile
// (which it wouldn't otherwise) but irsend will not work until ESP32 specific code is written
// for that -- merlin
// As a warning, sending timing specific code from an ESP32 can be challenging if you need 100%
// reliability because the arduino code may be interrupted and cause your sent waveform to be the
// wrong length. This is specifically an issue for neopixels which require 800Khz resolution.
// IR may just work as is with the common code since it's lower frequency, but if not, the other
// way to do this on ESP32 is using the RMT built in driver like in this incomplete library below
// https://github.com/ExploreEmbedded/ESP32_RMT
#elif defined(IR_TIMER_USE_ESP32)
#define TIMER_RESET
#define TIMER_ENABLE_PWM
#define TIMER_DISABLE_PWM Serial.println("IRsend not implemented for ESP32 yet");
#define TIMER_ENABLE_INTR
#define TIMER_DISABLE_INTR
#define TIMER_INTR_NAME
//---------------------------------------------------------
// Unknown Timer
//